Publications related to Development of a Sustainable Thermoplastic Composite Material Using Manicaria saccifera Fabric and Elium® Resin

Related publications (24)

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Saturated transverse permeability of unidirectional rovings for pultrusion: The effect of microstructural evolution through compaction

Véronique Michaud, Guillaume Clément Broggi

The transverse permeability of roving/tow-based fiber reinforcement is of great importance for accurate flow modeling in the pultrusion process. This study proposes an experimental approach to characterize the roving-based fiber beds' permeability under di ...

Wiley2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Reaction of β-Ketoester and 1,3-Diol to Access Chemically Recyclable and Mechanically Robust Poly(vinyl alcohol) Thermosets through Incorporation of β-(1,3-dioxane)ester

Oliviero Julien Gubelmann, Francesco Stellacci, Youwei Ma, Melis Özkan, Chihui Zheng, Gadi Slor

The development of mechanically robust, chemically stable, and yet recyclable polymers represents an essential undertaking in the context of advancing a circular economy for plastics. Here, we introduce a novel cleavable β-(1,3-dioxane)ester (DXE) linkage, ...

Wiley-VCH Verlag GmbH2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Jacobus Gerardus Rudolph Staal

Liquid composite moulding methods are widely applied for manufacturing of fibre reinforced polymer (FRP) composites and consist of two main stages: impregnation of fibrous reinforcements by a liquid monomer resin and curing of this resin. This thesis work ...

EPFL2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature

Thomas Keller, Hongwei Zhu

An experimental investigation was conducted on the thermophysical and thermomechanical properties of phenolic-basalt fiber-reinforced polymer (P-BFRP) rebars subjected to high temperature. As a comparison, vinylBFRP (V-BFRP) and epoxy-BFRP (E-BFRP) rebars ...

ELSEVIER SCI LTD2022

Monitoring of Torque Induced Strain in Composite Shafts with Embedded and Surface-Mounted Optical Fiber Bragg Gratings

John Botsis, Georgios Violakis, Georgios Pappas

In this study, silica glass, optical fiber Bragg gratings (FBGs) are used for torque-induced strain monitoring in carbon fiber reinforced polymer (CFRP) hollow shafts toward the development of a methodology for structural load monitoring. Optical fibers wi ...

2021

Centimeter-scale gas-sieving nanoporous single-layer graphene membrane

Kumar Varoon Agrawal, Shiqi Huang, Mostapha Dakhchoune, Guangwei He, Luc Sébastien Bondaz, Wan-Chi Lee

High-permeance, molecular-sieving, nanoporous single-layer graphene (NSLG) membranes are highly promising for gas separation. However, the formation of cracks during the transfer of NSLG to a low-cost porous support is difficult to avoid. These cracks are ...

2020

Spatially Resolved Production of Platinum Nanoparticles in Metallosupramolecular Polymers

Emad Oveisi, Stephen Schrettl

Nanocomposites consisting of a polymer matrix and metallic nanoparticles can merge the functional, structural, and mechanical properties of the two components and are useful for applications that range from catalysis to soft electronics. Gaining spatial co ...

AMER CHEMICAL SOC2020

Two-dimensional crack growth in FRP laminates and sandwich panels

Aida Cameselle Molares

Fiber-reinforced polymer (FRP) composite materials are currently being selected for the design of lightweight and efficient structural members in a wide number of engineering applications. Sandwich panels with glass fiber-reinforced polymer (GFRP) face she ...

EPFL2019

Stress ratio effect on tension-tension fatigue behavior of angle-ply GFRP laminates

Thomas Keller, Anastasios Vassilopoulos

The effect of the stress ratio (R = sigma(min)/sigma(max)) on the fatigue behavior of (+/- 45)(2s) angle-ply glass/epoxy composite laminates was investigated by comparing their mechanical, thermal, and optical properties under the stress ratio of 0.5 with ...

2019

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Albert Gérard Lebaupin

In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...

SAGE PUBLICATIONS LTD2019

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Probing the micromechanical strength of oxide ceramic composite reinforcements

Václav Pejchal

This work shows how one can probe the micromechanical strength of ceramic reinforcements used in metal matrix composites, which greatly influences the mechanical performance of the composite material yet has seldom been quantified with precision. More spec ...

EPFL2017

Design of Self-Healing Supramolecular Rubbers with a Tunable Number of Chemical Cross-Links

Véronique Michaud, Federica Sordo

Supramolecular rubbers incorporating a large number of physical cross-links through cooperative hydrogen bonds display high self-healing properties but limited solvent and creep resistance due to the lack of chemical cross-links. Increasing both chemical c ...

American Chemical Society2015

Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing

Thomas Gmür, Joël Cugnoni, Enrique René Guzman Solares

Among materials being introduced in the aerospace industry, the carbon fibre reinforced plastics (CFRP) have a place of privilege because of their exceptional stiffness-to-mass ratio. However, the polymer-based matrix is vulnerable to damages by environmen ...

Elsevier2014

Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix

Andreas Mortensen, Amaël Maximilien Cohades

We use the long-wavelength model of Hutchinson and Neale (1977) and Ghosh (1977) to estimate the uniform tensile elongation of two-phase composites deforming quasistatically according to the equistrain rule of mixtures, in which one phase is ductile while ...

Elsevier2014