Publications related to Development of friction welding of wood : physical, mechanical and chemical studies

Related publications (27)

Resolving bacterial cell biology: from replisome dynamics to cell wall synthesis

Bacteria are ubiquitous single cellular organisms. Compared to eukaryotic cells, bacteria have two unique characteristics: the membrane-less nucleoid and the cell wall built of peptidoglycan (PG). In most bacteria, a single circular chromosome is compacted ...

EPFL2024

Quantification of Native Lignin Structural Features with Gel-Phase 2D-HSQC0 Reveals Lignin Structural Changes During Extraction

Jeremy Luterbacher, Stefania Bertella, Claire Laura Marion Charline Bourmaud

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature H-1-C-13 Heteronuclear S ...

Wiley-VCH Verlag GmbH2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

A novel fatigue life prediction methodology based on energy dissipation in viscoelastic materials, synergistic effects of stress level, stress ratio, and temperature

Thomas Keller, Lulu Liu, Abdolvahid Movahedirad

This work introduces a new methodology to predict the fatigue life of viscoelastic materials by considering the creep effect on fatigue behavior under the concurrent effects of stress level, stress ratio, and temperature. The model established based on the ...

2024

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

John Martin Kolinski, Chenzhuo Li, Xinyue Wei

This data package supports the publication 'Complexity of crack front geometry enhances toughness of brittle solids' by Xinyue Wei, Chenzhuo Li, Cían McCarthy, and John M. Kolinski Nature physics (2024) - https://doi.org/10.1038/s41567-024-02435-x DOI: 1 ...

Zenodo2024

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Geometric tolerances of welded connections with inelastic panel zones

Ce Wen, Dimitrios Lignos, Andronikos Skiadopoulos

Prequalified beam-to-column connections in steel moment resisting frames usually concentrate inelastic deformations in the steel beam ends. As such, nonlinear geo-metric instabilities (i.e., local buckling) may occur in these regions at modest lateral drif ...

Ernst & Sohn2023

Experimental Investigation of Instability-Free Welded Moment Connections With Simplified Weld Details

Dimitrios Lignos, Andronikos Skiadopoulos

In capacity designed steel moment resisting frames, inelastic deformations are mostly concentrated in the steel beams and the column fixed ends of the first story. This design concept limits the participation of the column web’s panel zone in the energy di ...

2023

How roughness emerges on natural and engineered surfaces

Jean-François Molinari, Ramin Aghababaei

Roughness, defined as unevenness of material surfaces, plays an important role in determining how engineering components or natural objects interact with other bodies and their environment. The emergence of fractal roughness on natural and engineered surfa ...

SPRINGER HEIDELBERG2023

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Ke Huang, Yandong Jing

Wire-arc directed energy deposition (wire-arc DED), recognized for its ability to produce large-scale parts, has gained considerable attention. However, a critical issue with this method is the high prevalence of internal porosity defects found in the manu ...

Elsevier Science Sa2023

Anomalous Dissipation and Lack of Selection in the Obukhov-Corrsin Theory of Scalar Turbulence

Maria Colombo, Massimo Sorella

The Obukhov-Corrsin theory of scalar turbulence [21, 54] advances quantitative predictions on passive-scalar advection in a turbulent regime and can be regarded as the analogue for passive scalars of Kolmogorov's K41 theory of fully developed turbulence [4 ...

Springernature2023

Influence of Viscous Lubricant on Nucleation and Propagation of Frictional Ruptures

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Federica Paglialunga

Fluids are pervasive in the Earth's crust and saturate fractures and faults. The combination of fluids and gouge layers developing along faults can generate fluids of different viscosities. Such viscous fluids were found to influence the reactivation, fric ...

2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi, Helena Luisa Teixido Pedarros

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

Drained Clay-Pipe Interface Resistance at Low Normal Stresses and Elevated Temperatures

Roba Houhou

Offshore pipelines that transport hydrocarbons under high pressure and high temperature are usually thermally insulated to maintain an elevated temperature and prevent any heat loss to the surroundings. However, the temperatures at the outer-wall of the pi ...

AMER SOC CIVIL ENGINEERS2023

Biofilm morphogenesis on soft hydrogels

Alice Cont

Bacteria often colonize their environment in the form of surface attached multicellular communities called biofilms. Biofilms grow from surface-attached cells that undergo division while self-embedding in a viscoelastic matrix. Biofilms grow at the surface ...

EPFL2023

Determination of Parameters Characteristic of Dynamic Weakening Mechanisms During Seismic Faulting in Cohesive Rocks

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Chiara Cornelio

While sliding at seismic slip-rates of ∼1 m/s, natural faults undergo an abrupt decrease of shear stress called dynamic weakening. Asperity-scale processes related to flash heating and weakening and, meso-scale (mm-cm) processes involving shear across the ...

AGU2022

Caching and Neutrality

Aikaterini Argyraki, Pavlos Nikolopoulos, Muhammad Abdullah

We are used to defining network neutrality as absence of traffic differentiation, like policing or shaping. These mechanisms, however, are often not what determines end-users’ quality of experience (QoE). Most content today is accessed through edge caches, ...

ACM Association for Computing Machinery2023

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

The Effect of Y Content on Structural and Sorption Properties of A(2)B(7)-Type Phase in the La-Y-Ni-Al-Mn System

Andreas Züttel, Loris Giovanni Lombardo

Metal hydrides are an interesting group of chemical compounds, able to store hydrogen in a reversible, compact and safe manner. Among them, A(2)B(7)-type intermetallic alloys based on La-Mg-Ni have attracted particular attention due to their high electroch ...

MDPI2023