Publications related to Sintering behaviour and ionic conductivity of yttria-doped ceria

Magneto-Thermoelectric Transport in Graphene Quantum Dot with Strong Correlations

Disorder at etched edges of graphene quantum dots (GQD) enables random all-to-all interactions between localized charges in partially filled Landau levels, providing a potential platform to realize the Sachdev-Ye-Kitaev (SYK) model. We use quantum Hall edg ...

2024

Mixed ionic-electronic conduction in Ruddlesden-Popper and Dion-Jacobson layered hybrid perovskites with aromatic organic spacers

Michael Graetzel, Davide Moia, Joachim Maier, Jovana Milic, Algirdas Ducinskas, Mina Jung

The understanding of mixed ionic-electronic conductivity in hybrid perovskites has enabled major advances in the development of optoelectronic devices based on this class of materials. While recent investigations revealed the potential of using dimensional ...

Royal Society of Chemistry2024

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Roberto Guarino

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Aip Publishing2024

Turbulence and Heat exchange in the Near-Surface Boundary Layer over Patchy Snow

Michael Haugeneder

The atmospheric layer adjacent to the earth's surface is of crucial importance for weather models due to the exchange of energy between the surface and the atmosphere. This exchange is dependent on the various surface properties and influences the state of ...

EPFL2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Samaneh Daviran

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

EPFL2024

Thermoelectric power of overdoped Tl2201 crystals: charge density waves and T1 and T2 resistivities

Matthias Carsten Putzke

We report measurements of the in-plane thermoelectric power (TEP) for an overdoped (OD) crystal of the single layer cuprate superconductor Tl2Ba2CuO6+x (Tl2201) at several hole concentrations (p), from 300 or 400 K to below the superconducting transition t ...

Iop Publishing Ltd2024

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

2023

Murunskite - a new class of functional material

Davor Tolj

The subject of the present work is discovery and in-depth characterization of a new class of functional materials. Tuning of the bond polarity and orbital occupation with a goal of establishing balance between localization and delocalization of electrons - ...

EPFL2023

Fast online diagnosis for solid oxide fuel cells: Optimisation of total harmonic distortion tool for real-system application and reactants starvation identification

Jan Van Herle, Hamza Moussaoui, Gerald Hammerschmid

This study investigates the potential application of total harmonic distortion (THD), as a fast online monitoring tool, to identify the early signs of failure modes in solid oxide fuel cells (SOFC). Indeed, the timely detection and identification of faults ...

ELSEVIER2023

Validation of human thermo-physiology models for personalized predictions of thermal responses

Dolaana Khovalyg, Mohamad Rida

Current thermal comfort models used in practice do not consider physiological and psychological differences of people. With this respect, human thermo-physiology models (HTPM) are useful tools to assess human thermal comfort at local and overall levels of ...

Curran Associates, Inc2023

Accurate and efficient band-gap predictions for metal halide perovskites at finite temperature

Alfredo Pasquarello, Patrick Gono, Thomas Bischoff, Aleksei Tal, Haiyuan Wang

We develop a computationally efficient scheme to accurately determine finite-temperature band gaps for metal halide perovskites belonging to the class ABX(3) (A = Rb, Cs; B = Ge, Sn, Pb; and X = F, Cl, Br, I). First, an initial estimate of the band gap is ...

NATURE PORTFOLIO2022

A novel control strategy with an anode variable geometry ejector for a SOFC-GT hybrid system

Jinzhi Lu, Jinwei Chen

A novel control strategy was developed with an anode variable geometry ejector for a solid oxide fuel cell-gas turbine (SOFC-GT) system. The anode inlet temperature was controlled by combining two modes to achieve a greater controllable range: anode variab ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Modeling and assessment of high-temperature photo-electrochemical devices

Ronald Ramiro Gutierrez Perez

In this thesis, the feasibility and performance of photo-driven electrochemical (PEC) devices working at elevated temperatures (T>700 K) is investigated and modeled. In such high-temperature PEC devices, a part of the solar spectrum is used for generating ...

EPFL2022

Engineering of PEM-PEC photocathodes for solar-driven hydrogen production

Marina Caroline Michèle Caretti

Earth has always been in perpetual evolution, but today we must face its rapid change due to human activity. The intensification of industrial activities and transportation to support our modern lifestyles are the main causes of climate change and the adve ...

EPFL2022

Assessment of ammonia as energy carrier in the use with reversible solid oxide cells

Jan Van Herle, Michele Zendrini

Ammonia represents one of the most promising potential solutions as energy vector and hydrogen carrier, having a higher potential to transport energy than hydrogen itself in a pressurized form. Furthermore, solid oxide fuel cells (SOFCs) can directly be fe ...

2021

Enhanced Room-Temperature Ionic Conductivity of NaCB11H12 via High-Energy Mechanical Milling

Radovan Cerny, Matteo Brighi, Claudia Esther Avalos, Laura Piveteau

The body-centered cubic (bcc) polymorph of NaCB11H12 has been stabilized at room temperature by highenergy mechanical milling. Temperature-dependent electrochemical impedance spectroscopy shows an optimum at 45-min milling time, leading to an rt conductivi ...

AMER CHEMICAL SOC2021

Monocarborane cluster as a stable fluorine-free calcium battery electrolyte

Andreas Züttel, Kun Zhao

High-energy-density and low-cost calcium (Ca) batteries have been proposed as 'beyond-Li-ion' electrochemical energy storage devices. However, they have seen limited progress due to challenges associated with developing electrolytes showing reductive/oxida ...

Nature Portfolio2021

Strong temperature-dependent thermoelectric power of IrMn(3)thin films of different thicknesses

Jean-Philippe Ansermet, Haiming Yu, Junfeng Hu, Mukund Krishna Kothari

IrMn(3)thin films were experimentally characterized by thermoelectric power and resistivity as a function of temperature and sample thickness. The Seebeck coefficient shows strong temperature dependence and the value increases with temperature up to 350 K. ...

IOP PUBLISHING LTD2021