Publications related to Challenges and prospects for multi-chip microlens imprints on front-side illuminated SPAD imagers

Related publications (15)

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

AMER CHEMICAL SOC2025

Subwavelength imaging using a solid-immersion diffractive optical processor

Demetri Psaltis, Niyazi Ulas Dinç, Carlo Gigli

Phase imaging is widely used in biomedical imaging, sensing, and material characterization, among other fields. However, direct imaging of phase objects with subwavelength resolution remains a challenge. Here, we demonstrate subwavelength imaging of phase ...

Springernature2024

MEMS-based Tunable Metasurface for Reflective Display Applications

Dorian Giraud Herle

In an era where portable electronic devices are indispensable for a wide range of activities, the need for displays that provide both long-lasting battery life and excellent visibility in different lighting conditions is increasingly important. Emissive di ...

EPFL2024

Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Nickel oxide (NiOx)-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial r ...

Wiley2024

Best practices in measuring absorption at the macro- and microscale

Giulia Tagliabue, Alan Richard Bowman, Fateme Kiani Shahvandi, Jiaming Ma, German Garcia Martinez

The fraction of light absorbed in a material is a key parameter for a wide range of optoelectronic and energy devices, including solar cells, light emitting diodes, and photo(electro)chemical devices. It can reveal detailed performance information and esta ...

2024

Simulation and Fabrication of Monolithic III-V Photodetectors on Si: The Role of Growth Facets and Localization of Heterojunctions

Kirsten Emilie Moselund, Simone Iadanza

In this work, we provide important parameters to take into account when fabricating in-plane III-V photodetectors (PDs) integrated on silicon (Si) using template-assisted selective epitaxy (TASE). Their performance has previously been demonstrated, and her ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2024

Combined Vacuum Evaporation and Solution Process for High-Efficiency Large-Area Perovskite Solar Cells with Exceptional Reproducibility

Michael Graetzel

Organic-inorganic hybrid perovskites exhibit outstanding performances in perovskite solar cells (PSCs). However, the complex solution chemistry of perovskites precursors renders it difficult to prepare large-area devices in a reproducible way, which is a p ...

Wiley-V C H Verlag Gmbh2023

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Critical Role of Removing Impurities in Nickel Oxide on High-Efficiency and Long-Term Stability of Inverted Perovskite Solar Cells

Ulf Anders Hagfeldt

The performance enhancement of inverted perovskite solar cells applying nickel oxide (NiOx) as the hole transport layer (HTL) has been limited by impurity ions (such as nitrate ions). Herein, we have proposed a strategy to obtain high-quality NiOx nanopart ...

Wiley-VCH Verlag GmbH2022

Sulfides as a new class of stable cost-effective materials compared to organic/inorganic hole transport materials for perovskite solar cells

Mohammadreza Golobostanfard

Perovskite solar cells (PSCs) have received a remarkable attention compared to the other types of solar cells due to their high carrier mobility, low recombination rate, and rapid increase in terms of efficiency in short time. However, two essential parame ...

2022

Source noise suppression in attosecond transient absorption spectroscopy by edge-pixel referencing

Hugo Jean Baptiste Marroux

Attosecond transient absorption spectroscopy (ATAS) is used to observe photoexcited dynamics with outstanding time resolution. The main experimental challenge of this technique is that high-harmonic generation sources show significant instabilities, result ...

2021

Water Stable Haloplumbate Modulation for Efficient and Stable Hybrid Perovskite Photovoltaics

Michael Graetzel, Ulf Anders Hagfeldt, Jovana Milic, Zaiwei Wang

The commercialization of perovskite solar cells is mainly limited by their operational stability. Interlayer modification by thin interface materials between the perovskite and the charge transport layers is one of the most effective methods to promote the ...

WILEY-V C H VERLAG GMBH2021

High resolution optical projection tomography platform for multispectral imaging of the mouse gut

Aleksandra Radenovic, Adrien Charles-François Raymond Descloux, Arielle Louise Planchette, Alessio Mylonas

Optical projection tomography (OPT) is a powerful tool for three-dimensional imaging of mesoscopic biological samples with great use for biomedical phenotyping studies. We present a fluorescent OPT platform that enables direct visualization of biological s ...

2021

Enhancing Algae Biomass Production by Using Dye-Sensitized Solar Cells as Filters

Mohammad Khaja Nazeeruddin, Christian Ludwig, Shivom Sharma, Peng Qin, Eya Nicodeme

One of the most promising options for decreasing the costs of microalgae production is enhancing the production and reducing the energy demand of the culturing systems and the high surface area requirements. Because microalgae growth requires only specific ...

2021

The roles of fused-ring organic semiconductor treatment on SnO2 in enhancing perovskite solar cell performance

Rosario Scopelliti

It took only 11 years for the power conversion efficiency (PCE) of perovskite solar cells (PSCs) to increase from 3.8% to 25.2%. It is worth noting that, as a new thin-film solar cell technique, defect passivation at the interface is crucial for the PSCs. ...

2021