Publications related to Impact properties of shear thickening fluid impregnated foams

Related publications (28)

Painting Taylor vortices with cellulose nanocrystals: Suspension flow supercritical spectral dynamics

We study the flow stability and spatiotemporal spectral dynamics of cellulose nanocrystal (CNC) suspensions in a custom Taylor-Couette flow cell using the intrinsic shear induced birefringence and liquid crystalline properties of CNC suspensions for flow v ...

Aip Publishing2024

Numerical simulation of immiscible incompressible viscous, viscoelastic and elastic multiphase flows

Léo Aurélio Diserens

A unified numerical framework is presented for the modelling of multiphasic viscoelastic and elastic flows. The rheologies considered range from incompressible Newtonian or Oldroyd-B viscoelastic fluids to Neo-Hookean elastic solids. The model is formulate ...

EPFL2023

Reduced order modeling of parametrized pulsatile blood flows: Hematocrit percentage and heart rate

Ricardo Reyes Sotomayor

This paper numerically evaluates the accuracy and performance of a stabilized finite element Reduced Order Modelling (ROM) approach that is designed to simulate pulsatile blood flows. The method is able to estimate fluid flow parametric solutions of intere ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Characteristic rupture height of the mediating air film beneath an impacting drop on atomically smooth mica

John Martin Kolinski, Ramin Kaviani

Before a droplet can contact a surface during impact, it must first displace the air beneath it. Over a wide range of impact velocities, the droplet first squeezes the air into a thin film, enhancing its resistance to drainage; this slows the progress of t ...

Amer Physical Soc2023

Influence of Viscous Lubricant on Nucleation and Propagation of Frictional Ruptures

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Federica Paglialunga

Fluids are pervasive in the Earth's crust and saturate fractures and faults. The combination of fluids and gouge layers developing along faults can generate fluids of different viscosities. Such viscous fluids were found to influence the reactivation, fric ...

2023

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Sofia Lydia Ntella

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Rheological Properties of Ionically Crosslinked Viscoelastic 2D Films vs. Corresponding 3D Bulk Hydrogels

Esther Amstad, Gaia De Angelis

Ionically crosslinked hydrogels containing metal coordination motifs have piqued the interest of researchers in recent decades due to their self-healing and adhesive properties. In particular, catechol-functionalized bulk hydrogels have received a lot of a ...

AMER CHEMICAL SOC2023

A direct link between active matter and sheared granular systems

Elisabeth Agoritsas

The similarity in mechanical properties of dense active matter and sheared amorphous solids has been noted in recent years without a rigorous examination of the underlying mechanism. We develop a mean-field model that predicts that their critical behavior— ...

2021

Multi-scale modeling of aggregate interlock phenomena in concrete

Mohit Pundir

In concrete structures, opened cracks contribute significantly to the transfer of shear and normal stresses through the contact forces occurring between fractured surfaces. Such contact forces are due to protruding asperities, engaged by interlocking and f ...

EPFL2021

A new insight into the dynamic impact between geophysical flow and rigid barrier

Xingyue Li

Understanding the interaction between complicated geophysical flows and barriers remains a critical challenge for hazards countermeasures in engineering design. In this study, the impact of geophysical flows on a rigid barrier is studied numerically using ...

ELSEVIER SCI LTD2022

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Slot-Die Coating of an On-the-Shelf Polymer with Increased Dielectric Permittivity for Stack Actuators

Yauhen Sheima

Nitrile-butadiene rubbers (NBR) have been extensively used as dielectric materials due to their commercial availability, excellent mechanical properties, glass transition temperature below 0 degrees C, and increased dielectric permittivity owing to the pre ...

AMER CHEMICAL SOC2022

Effect of Fluid Viscosity on Earthquake Nucleation

Marie Estelle Solange Violay, Chiara Cornelio

Injection of fluids in geo-reservoirs can reduce the effective stresses at depth, lubricating the nearby faults, promoting slip and, potentially, earthquakes. High-viscous fluids are often used during hydraulic fracturing and production phases in geo-reser ...

2020

Effects of velocity-dependent apparent toughness on the pre- and post-shut-in growth of a hydraulic fracture

Dong Liu, Guanyi Lu

We investigate the growth of a plane-strain/radial hydraulic fracture in an infinite impermeable medium driven by a constant injection rate assuming that the apparent toughness scales with the decreasing fracture growth rate in a power-law relation. The vi ...

ELSEVIER SCI LTD2022

Experimental study of impulse waves generated by viscoplastic fluid

Zhenzhu Meng

Landslide-generated waves, also called impulse waves, occur as a result of the intrusion of landslides (such as rock falls, debris flows, and avalanches) into bodies of water (such as lakes, reservoirs, and seas). The objective of this thesis was to study ...

EPFL2020

Planar hydraulic fracture growth perpendicular to the isotropy plane in a transversely isotropic material

Brice Tanguy Alphonse Lecampion, Haseeb Zia, Fatima-Ezzahra Moukhtari

The configuration of a hydraulic fracture (HF) propagating perpendicular to the isotropy plane of a transversely isotropic (TI) material is encountered in most sedimentary basins. We account for both elastic and fracture toughness anisotropy, and investiga ...

2020

An Analytical Method to Predict the Structural Behavior of Timber-Concrete Structures With Brittle-to-Ductile Shear Connector Laws

Eugen Brühwiler

Timber-Concrete Composite (TCC) structures allow taking synergistic advantage of the properties of both materials to optimize the overall performances in terms of lightness, slenderness, acoustic insulation, vibrational behaviour and environmental footprin ...

ELSEVIER SCI LTD2020

Hydraulic Transport Through Calcite Bearing Faults With Customized Roughness: Effects of Normal and Shear Loading

Marie Estelle Solange Violay, Mateo Alejandro Acosta

Understanding fluid flow in rough fractures is of high importance to large scale geologic processes and to most anthropogenic geo‐energy activities. Here we conducted fluid transport experiments on Carrara marble fractures with a novel customized surface t ...

2020

Quantifying the transition of impact mechanisms of geophysical flows against flexible barrier

Xingyue Li

Flexible barriers have been increasingly used worldwide for mitigating natural hazards involving various geophysical flows. The analysis and design of flexible barriers need to distinguish two major impact mechanisms, runup and pile-up, which remain poorly ...

ELSEVIER2021