Konstantinos KarapiperisKostas Karapiperis is an Assistant Professor at EPFL directing the Data-Driven Mechanics Laboratory (LMD). His research lies at the intersection of mechanics, multiscale modeling, and data science, with applications ranging from geomaterials to structural materials. Prior to EPFL, he worked as a Postdoctoral Researcher and Lecturer at the Department of Mechanical and Process Engineering of ETH Zürich, supported by a Marie Sklodowska-Curie Fellowship. He holds a PhD in Applied Mechanics and a Minor in Applie
Virginia CarnevaliExpertise
Theoretical condensed matter physics: theory and simulations of structural, electronic, magnetic and optical properties (Quantum ESPRESSO), ab-initio molecular dynamics (CP2K), and Kinetic Monte Carlo codes; automate Quantum ESPRESSO workflows and high-throughput calculations (AFLOWÏ€); generation of tight-binding hamiltonians, transport properties, and data analysis (PAOFLOW).Materials for photovoltaic: Pb- and Sn-based organic perovskites; investigation and improvement of the HTL-ETL interaction
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Gregor JotzuGregor Jotzu is heading the Dynamic Quantum Materials Laboratory (DQML) at EPFL. His research concerns the control of quantum materials using intense low-frequency laser pulses and the dynamics of order formation in strongly correlated quantum systems.After reading physics at the University of Oxford, he became the 2009/2010 Michael von Clemm Fellow at Harvard University. He received his doctorate from ETH Zurich, where he studied quantum magnetism and driving-induced order using ultracold atoms in optical
Andrea VezzosiAndrea Vezzosi is a postdoctoral researcher in the group of Prof. Ursula Rothlisberger at the Institute of Chemical Sciences and Engineering, EPFL (Switzerland). He earned his Ph.D. in Physics and Nanosciences from the University of Modena and Reggio Emilia in 2024, where he investigated spin–orbit coupling and topological states in core–shell semiconductor nanowires. During his doctoral studies, he developed nwkp, an open-source Python library for computing the band structure of core–shell nanowires using
Keivan Faghih NiresiExpertise
Computational sensing/imaging, Inverse problems, Signal processing, Graph neural networks, Domain adaptation.
Keivan is a PhD student at école Polytechnique Fédérale de Lausanne (EPFL). He joined the Intelligent Maintenance and Operations Systems (IMOS) Lab under the supervision of Prof. Olga Fink in February 2023.Prior to joining EPFL, he obtained his master's degree from the Institute of Communications Engineering, College of Electrical Engineering and Computer Science, National Tsing Hua Univer
Sangwoo KimSangwoo Kim is set to join EPFL as a Tenure Track Assistant Professor in September 2023. Prior to his appointment at EPFL, he served as a postdoctoral fellow in the Department of Mechanical Engineering at the University of California, Santa Barbara. He earned his graduate degree in Theoretical and Applied Mechanics from the University of Illinois at Urbana-Champaign, where his research delved into the relationships between statistics, geometry, and mechanical states in cellular matters. Currently, his research focus on fundamental understanding of biological and living systems, as well as the study of soft and active matter employing principles from mechanics and physics. His research interests encompass embryonic development, tissue morphogenesis, structure and mechanics of soft materials, inherent structure of amorphous materials, and non-equilibrium dynamics of active matter.
Stefana ParaschoTeaching & PhD PhD Students Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Courses Capitalizing on Uncertainty AR-809 SUMMER SCHOOL - Capitalizing on Uncertainty is a 6-day Summer school exploring uncertainty as a productive resource in design and fabrication through lectures, hands-on experiments, and the collaborative design and construction of a full-scale structure in a human-robot fabrication setting. Digital design and making: A criti
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
Tara HabibiCurrent Work
SafeShore ProjectPrincipal Investigator Climate change will lead to significant sea level rise and more frequent, intense storm surges. These developments pose severe risks to coastal regions, threatening human lives, cultural heritage, and economic stability. Conventional shoreline protection methods, such as seawalls and armour blocks, have proven effective. However, their reliance on heavy concrete makes them slow to construct and environmentally unsustainable. To address these challenges, t
Ghassan ShahinExpertise
I am a geomechanics researcher with interests in the mechanical behavior of the Earth's materials at conditions pertaining to the shallow Earth and upper mantle. In my studies, I employ laboratory geomechanics backed by x-ray methods, advanced constitutive modeling, and material theories to study failure patterns across scales spanning from the grain-scale up to the field-scale.
Expertise
I am a geomechanics researcher with interests in the mechanical behavior of the Earth's materials at condition
Georgios MoschidisTeaching & PhD PhD Students Abraham Gabriel Dorsaz Courses Analysis IV (for EL, GM, MX) MATH-207(c) This course serves as an introduction to the theory of complex analysis, Fourier series and Fourier transforms, the Laplace transform, with applications to the theory of ordinary and partial differential equations. These tools play an integral role in most branches of science and engineering. Differential geometry I - curves and surfaces MATH-213 This course serves as an intr
Zoë HolmesTeaching & PhD PhD Students Ricard Puig, Sacha Lerch, Reyhaneh Aghaei Saem, Shao Hen Chiew, Weijie Xiong, Marc Sanz Drudis, Mehrad Sahebi, Manuel Rudolph Courses Quantum information theory PHYS-550 After recapping the basics of quantum theory from an informationtheoretic perspective, we will cover more advanced topics inquantum information theory. This includes introducing measures of quantum information, and developing a more advanced understanding quantum states, channels and measurement
Ayatallah Ahmed Gamal Kamal ElakhrasExpertise
Dataflow ArchitectureHigh-Level Synthesis
Ayatallah is a Ph.D. student in the Processor Architecture Laboratory, advised by Professor Paolo Ienne. Between October 2023 and March 2024, she did an internship at AMD in the Research and Advanced Development team, under the supervision of Dr. Kristof Denolf. She received a B.Sc. degree in Computer Engineering from the American University in Cairo, Egypt in 2020 and started her Ph.D. in the same year.Her research interests include dataflow architecture,
Savvas SaloustrosEducation PhD | Construction Engineering 2017 – 2017 UPC-BarcelonaTech, Spain MSc | Structural Analysis of Monuments and Historical Constructions (SAHC) 2013 – 2013 University of Padova, Italy & UPC-BarcelonaTech, Spain Diploma | Civil Engineering 2012 – 2012 National Technical University of Athens, Greece Professionals experiences Co-founder & Board Member 2019–2019 FENECStructural Engineer 2019–2019 Windmill Structural Constultants, Barcel
Brayden Graham MyersTeaching & PhD Courses General physics : mechanics (English) PHYS-101(en) Students will learn the principles of mechanics to enable a better understanding of physical phenomena, such as the kinematics and dyamics of point masses and solid bodies. Students will acquire the capacity to quantitatively analyze these effects with the appropriate theoretical tools.
Vladimir ManucharyanTeaching & PhD PhD Students Chulwoo Ahn, Marco Nicolas Mueller, Taketo Imaizumi, Andrea Lizzit, Andrea Duina, Nikola Dimitrov Dimitrov Courses Microwave engineering in physics QUANT-410 This course aims at teaching basic notions and tricks of microwave engineering to students with only an elementary knowledge of applied electromagnetism. Emphasis is made on topics that often arise in modern physics experiments, including quantum science and technology research. Quantum mechanics for non-
