Simone IadanzaTeaching & PhD Courses Nanophotonics MICRO-516 Students understand and apply the physics of the interaction of light with semiconductors. They understand the operating mechanism of scaled photonic devices such as photodetectors, LEDs and lasers, as well as challenges and opportunities relating to their integration and dimensional scaling.
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Zheru QiuBefore joining LPQM, I graduated from University of Science and Technology of China with a bachelor's degree. In USTC, I actively worked in Prof. Zheng-tian Lu's research group and I mainly participated in the atomic magnetometer project led by Prof. Dong Sheng.
Ali MeimandiExpertise
Research interests:Analog and digital circuit designBiomedical circuits and systems
Ali Meimandi received B.Sc degree in electrical engineering from Amirkabir University of Technology(Tehran Polytechnic), Tehran, Iran, and M.Sc. degree in electronic engineering from Politecnico di Milano, Milan, Italy, in 2018 and 2022, respectively. He is a Research Assistant and doctoral candidate in the BioCMOS Interfaces(BCI) Laboratory at école Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.His res
Alisa DavydovaEducation BSc in Physics | Department of Theoretical physics, Classical and Quantum Field Theory 2015 – 2019 Lomonosov Moscow State University MSc in Photonics and Quantum Materials | Nanomaterials application for Nonlinear Optics 2019 – 2021 Skolkovo Institute of Science and Technology
Christian André Clément LafforgueTeaching & PhD Courses Electrical engineering science & technology EE-106 This course introduces the fundamental laws of electricity and the methods for analyzing linear electrical circuits, consisting of resistors, capacitors and inductors. We will start with the Direct Current circuits and then switch to single-phase and three-phase Alternating Current circuits.
Gregor JotzuGregor Jotzu is heading the Dynamic Quantum Materials Laboratory (DQML) at EPFL. His research concerns the control of quantum materials using intense low-frequency laser pulses and the dynamics of order formation in strongly correlated quantum systems.After reading physics at the University of Oxford, he became the 2009/2010 Michael von Clemm Fellow at Harvard University. He received his doctorate from ETH Zurich, where he studied quantum magnetism and driving-induced order using ultracold atoms in optical
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Athanasios NenesTeaching & PhD PhD Students Berkay Dönmez, Ernest Abboud Past EPFL PhD Students Paraskevi Georgakaki, Lucile Ricard Courses Atmospheric processes: from cloud to global scales ENV-407 The main objective is to present important atmospheric processes from the local to global scales. The course will start with cloud processes, continue to synoptic phenomena like extratropical cyclones and fronts, to finally cover numerical modeling at the regional and global scales. Introduction to environme
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
Zihan LiGraduated from University of Science and Technology of China with a bachelor’s degree in optics. And now, I am working on LiNbO3 integrated photonic device and related nanofabrication technology.
Daryl Yee Wei LiangIncoming Assistant Professor of Electrical and Microengineering (March 2023)
Gopal Narmada NaiduExpertise
Researcher with 8+ years of experience in computational physics and multiphysics modeling, focused on numerical simulation of light–matter interactions and photon propagation. Proficient in FEM, FDTD, and Monte Carlo methods to model energy conversion and optical behavior, with additional expertise in AI/ML techniques for model optimization and design exploration. Strong background in photonic devices, photo-thermal, thermo-optical effects, and nanostructure engineering. Adept at translating compl
Du WenEducation PhD | Doctor of Philosophy, Mechanical Engineering 2020 – 2023 The University of Tokyo MEng | Master of Engineering, Power Engineering and Engineering Thermophysics 2016 – 2019 Xi’an Jiaotong University Bsc | Bachelor of Engineering 2012 – 2016 Xi’an Jiaotong University
Loïc Jean Pierre HerviouTeaching & PhD Courses Solid state physics III PHYS-419 The aim of this course is to provide an introduction to the theory of a few remarkable phenomena of modern condensed matter physics ranging from the quantum Hall effects to superconductivity.
Mats Julius StensrudTeaching & PhD PhD Students Ignacio Gonzalez Perez, Gellért Géza Perényi, Lorenzo Gasparollo, Julien David Laurendeau Past EPFL PhD Students Matias Janvin, Amit Sawant Courses Causal thinking MATH-352 This course will give a unified presentation of modern methods for causal inference. We focus on concepts, and we will present examples and ideas from various scientific disciplines, including medicine, computer science, engineering, economics and epidemiology. Probability and statistics (
