Publications by Oguzhan Oguz | EPFL Graph Search

Related publications (13)

Tuning Interaction Parameters of Thermoplastic Polyurethanes in a Binary Solvent To Achieve Precise Control over Microphase Separation

Thermoplastic polyurethanes (TPUs) are designed using a large variety of basic building blocks but are only synthesized in a limited number of solvent systems. Understanding the behavior of the copolymers in a selected solvent system is of particular inter ...

AMER CHEMICAL SOC2019

Strain-induced network chains damage in carbon black filled EPDM

Nicolas Candau, Oguzhan Oguz

This paper presents an experimental method to follow in-situ the chains network alteration of filled vulcanized rubbers induced by deformation. Macroscopic damage is first investigated on a series of EPDM by quantifying void fraction via Digital Image Corr ...

ELSEVIER SCI LTD2019

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

Véronique Michaud, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimizat ...

WILEY2021

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

An amorphous poly(urethane-urea) copolymer composed of 70 wt% poly(ethylene oxide) (PEO) soft segments (SS) (Mw = 2000 g mol−1) and 30 wt% cycloaliphatic hard segments (HS) was subjected to in-situ X-Rays during tensile deformation. Mechanical hardening at ...

2021

Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites

John Christopher Plummer, Nicolas Candau, Oguzhan Oguz

Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt % (4.4 vol %) in order to investig ...

2019

A Sustainable Approach to Produce Stiff, Super-Tough, and Heat-Resistant Poly(lactic acid)-Based Green Materials

Nicolas Candau, Oguzhan Oguz

Circumventing inherent embrittlement, poor heat resistance, and melt elasticity of poly(lactic acid) (PLA) without compromising its remarkable stiffness and strength has become a particular challenge in polymer science due to increasing demand for green ma ...

AMER CHEMICAL SOC2019

Heat source and voiding signatures of Mullins damage in filled EPDM

Nicolas Candau, Oguzhan Oguz

The thermomechanical coupling of Mullins damage in filled EPDM has been investigated by analysing the self-heating via Infrared thermography (IR) and the voiding fraction by Digital Image Correlation (DIC). The volumetric strain measured during the rubber ...

ELSEVIER SCI LTD2020

All-polyamide nanofibrillar composites by in situ fibrillation of aramid fibers

John Christopher Plummer, Holger Frauenrath, Pascal Alexander Schouwink, Nicolas Candau, Oguzhan Oguz, Sylvain Cyril Claude Galland

All-polyamide composites containing up to 30 vol% highly dispersed PPTA nanofibrils with diameters in the range 50-500 nm were prepared by melt-compounding polyamide 6,10 (PA610) with chopped poly(p-phenylene terephthalamide) (PPTA) fibers in the temperatu ...

Elsevier Sci Ltd2023

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

Pascal Alexander Schouwink, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

There has been a considerable interest in developing stiff, strong, tough, and highly stretchable hydrogels in various fields of science and technology including biomedical and sensing applications. However, simultaneous optimization of stiffness, strength ...

2021

Supramolecular modification of sustainable high-molar-mass polymers for improved processing and performance

Holger Frauenrath, Marianne Liebi, Nicolas Candau, Oguzhan Oguz, Daniel Görl, Sophia Thiele, Torne Tänzer, Yevhen Hryshunin, Shuichi Haraguchi, Matthieu Claude Wendling

The plastic waste crisis is among humanity’s most urgent challenges. However, widespread adoption of sustainable plastics is hindered by their often inadequate processing characteristics and performance. Here, we introduce a bio-inspired strategy for the m ...

Nature Research2025

Strain and filler ratio transitions from chains network to filler network damage in EPDM during single and cyclic loadings

Nicolas Candau, Oguzhan Oguz

Chains and filler network damage were investigated during single and multiple cycles on a series of vulcanized EPDM containing various filler contents. In both series of experiments, a strain and a filler ratio transitions for damage mechanisms were identi ...

2020

Multi-material rail pad and method for manufacturing same

Maurice Ammann, Véronique Michaud, John Christopher Plummer, Joël Cugnoni, Holger Frauenrath, Oguzhan Oguz, Adrien Julien Demongeot

The invention relates to a rail pad (10, lOa-v, 10α-η) comprising: a) a pad matrix (1) comprising a first material and b) at least one damping element (2) at least partially encapsulated or embedded in the pad matrix (1), said damping element (2) comprisin ...

2022

Composition and method for the preparation of sheets, films, fibers, and molded parts

Holger Frauenrath, Oguzhan Oguz, Daniel Görl, Shuichi Haraguchi

The invention describes a composition containing a) a functionalized polymer (10) that comprises at least one polyester segment (13) and at least one, in particular at least two, polymer aggregating segment (11, 12) capable of forming non-covalent bonds ba ...

2020