Publications by Fan Fu | EPFL Graph Search

Related publications (16)

Mitigation of Vacuum and Illumination-Induced Degradation in Perovskite Solar Cells by Structure Engineering

y High specific power, high stowed packing efficiency, low processing cost, and high tolerance against environmental threats (high energy and charged particle radiation) make perovskite solar cell (PSC) a promising candidate for power generation in space. ...

CELL PRESS2020

RbF post deposition treatment for narrow bandgap Cu(In, Ga)Se-2 solar cells

Fan Fu

Multi-junction solar cells are known to have a considerably increased efficiency potential over their typical single junction counterparts. In order to produce low cost and lightweight multi-junction devices, the availability of suitable narrow (< 1.1 eV) ...

ELSEVIER SCIENCE SA2019

Multimodal Microscale Imaging of Textured Perovskite-Silicon Tandem Solar Cells

Christophe Ballif, Quentin Thomas Jeangros, Jérémie Werner, Florent Sahli, Chien-Jen Yang, Fan Fu, Alan Richard Bowman

Halide perovskite/crystalline silicon (c-Si) tandem solar cells promise power conversion efficiencies beyond the limits of single-junction cells. However, the local light-matter interactions of the perovskite material embedded in this pyramidal multijuncti ...

AMER CHEMICAL SOC2021

Mitigating Plasmonic Absorption Losses at Rear Electrodes in High‐Efficiency Silicon Solar Cells Using Dopant‐Free Contact Stacks

Christophe Ballif, Quentin Thomas Jeangros, Stefaan De Wolf, Mathieu Gérard Boccard, Julie Amandine Dreon, Sihua Zhong, Fan Fu

Although charge‐carrier selectivity in conventional crystalline silicon (c‐Si) solar cells is usually realized by doping Si, the presence of dopants imposes inherent performance limitations due to parasitic absorption and carrier recombination. The develop ...

2019

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI(3) perovskite solar cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Ulf Anders Hagfeldt, Xiong Li, Wolfgang Richard Tress, David Lyndon Emsley, Paramvir Ahlawat, Claudia Esther Avalos, Zaiwei Wang, Yuhang Liu, Anand Agarwalla, Brian Irving Carlsen, Fan Fu, Aditya Mishra, Haizhou Lu, Felix Thomas Eickemeyer, Xianfu Zhang, Likai Zheng

Mixtures of cations or halides with FAPbI(3) (where FA is formamidinium) lead to high efficiency in perovskite solar cells (PSCs) but also to blue-shifted absorption and long-term stability issues caused by loss of volatile methylammonium (MA) and phase se ...

American Association for the Advancement of Science2020

Impact of interlayer application on band bending for improved electron extraction for efficient flexible perovskite mini-modules

Romain Carron, Fan Fu

The development of highly efficient lightweight flexible perovskite solar cells (PSCs) opens the way to high-throughput roll-to-roll manufacturing processes and new applications such as building integration and mobile products. Flexible PSCs are generally ...

Elsevier Science Bv2018

Instability of p-i-n perovskite solar cells under reverse bias

Christophe Ballif, Laura Ding, Sylvain Nicolay, Quentin Thomas Jeangros, Arnaud Walter, Florent Sahli, Peter Joseph Fiala, Chien-Jen Yang, Fan Fu, Marion Solange Madeleine Dussouillez, Daniel Anthony Jacobs

Partial shading can trigger permanent damage in photovoltaic modules because the illuminated solar cells drive the shaded cells into reverse bias. Under reverse bias conditions, perovskite solar cells have been shown to degrade quickly due to processes tha ...

Royal Society of Chemistry2020

In Situ Buried Interface Engineering towards Printable Pb−Sn Perovskite Solar Cells

Fan Fu, Christian Michael Wolff

High-efficiency Pb−Sn narrow-bandgap perovskite solar cells (PSCs) heavily rely on PEDOT:PSS as the hole-transport layer (HTL) owing to its excellent electrical conductivity, dopant-free nature, and facile solution processability. However, the shallow work ...

American Chemical Society (ACS)2024

High-Performance Flexible All-Perovskite Tandem Solar Cells with Reduced V-OC-Deficit in Wide-Bandgap Subcell

Quentin Thomas Jeangros, Fan Fu, Xin Yu Chin

Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and lightweight substrat ...

WILEY-V C H VERLAG GMBH2022

Tailored lead iodide growth for efficient flexible perovskite solar cells and thin-film tandem devices

Romain Carron, Fan Fu

Flexible perovskite solar cells (PSCs) hold great promise for the low-cost roll-to-roll production of lightweight single- and multijunction photovoltaic devices. Among the different deposition methods used for the perovskite absorber, the two-step hybrid v ...

NATURE PUBLISHING GROUP2018

Monolithic Perovskite-Silicon Tandem Solar Cells: From the Lab to Fab?

Christophe Ballif, Antonin Faes, Quentin Thomas Jeangros, Chien-Jen Yang, Fan Fu

This review focuses on monolithic 2-terminal perovskite-silicon tandem solar cells and discusses key scientific and technological challenges to address in view of an industrial implementation of this technology. The authors start by examining the different ...

Wiley-V C H Verlag Gmbh2022

Perovskite/Perovskite/Silicon Monolithic Triple-Junction Solar Cells with a Fully Textured Design

Christophe Ballif, Sylvain Nicolay, Quentin Thomas Jeangros, Arnaud Walter, Jérémie Werner, Florent Sahli, Björn Niesen, Fan Fu

High efficiency triple-junction solar cells are currently made of III−V semiconductors using expensive deposition methods. Perovskite/perovskite/silicon monolithic triple-junction solar cells could be a lower-cost alternative as no epitaxial growth is requ ...

2018

CNT-based bifacial perovskite solar cells towards highly efficient 4-terminal tandem photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Fan Fu, Hongwei Zhu, Chunyang Zhang

Carbon-based perovskite solar cells (C-PSCs) are recognized as low-cost stable photovoltaics. However, currently most highly efficient C-PSCs are optically opaque, which means that they can only utilize direct illumination but cannot efficiently utilize th ...

2022

Hybrid sequential deposition process for fully textured perovskite/silicon tandem solar cells

Christophe Ballif, Laura Ding, Sylvain Nicolay, Quentin Thomas Jeangros, Soo-Jin Moon, Arnaud Walter, Davide Sacchetto, Mathieu Gérard Boccard, Matthieu Despeisse, Jérémie Werner, Florent Sahli, Loris Barraud, Raphaël Monnard, Monica Morales Masis, Gianluca Cattaneo, Bertrand Yves Paul Paviet-Salomon, Björn Niesen, Gizem Nogay, Oscar Esteban Rucavado Leandro, Matthias Wolfgang Bräuninger, Peter Joseph Fiala, Chien-Jen Yang, Fan Fu

Tandem solar cells that feature a high-bandgap perovskite cell on top of a lower bandgap silicon cell have the potential to reach efficiencies > 30%. Here, we present a versatile hybrid deposition method that yields conformal perovskite cells directly on t ...

IEEE2018

I-2 vapor-induced degradation of formamidinium lead iodide based perovskite solar cells under heat-light soaking conditions

Christophe Ballif, Sylvain Nicolay, Quentin Thomas Jeangros, Adriana Paracchino, Jérémie Werner, Peter Joseph Fiala, Fan Fu

Over the last years, the operational stability of perovskite solar cells has been significantly improved by compositional engineering, interface modification, and improved encapsulation techniques. However, irreversible degradation is still ubiquitously ob ...

2019

High-Efficiency Polycrystalline Thin Film Tandem Solar Cells

Michael Graetzel, Shaik Mohammed Zakeeruddin, Antonio Abate, Fan Fu

A promising way to enhance the efficiency of CIGS solar cells is by combining them with perovskite solar cells in tandem devices. However, so far, such tandem devices had limited efficiency due to challenges in developing NIR-transparent perovskite top cel ...

Amer Chemical Soc2015