Ali MeimandiExpertise
Research interests:Analog and digital circuit designBiomedical circuits and systems
Ali Meimandi received B.Sc degree in electrical engineering from Amirkabir University of Technology(Tehran Polytechnic), Tehran, Iran, and M.Sc. degree in electronic engineering from Politecnico di Milano, Milan, Italy, in 2018 and 2022, respectively. He is a Research Assistant and doctoral candidate in the BioCMOS Interfaces(BCI) Laboratory at école Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.His res
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Francesca RodinoExpertise
Electrochemical BiosensorsSensors and Biosensors interfaces | front-end electronicsBiomedical circuits and systems
Francesca Rodino received the B.Sc. and M.Sc. degrees in Biomedical Engineering from the Politecnico di Torino, Turin, Italy, in 2019 and 2022, respectively. She developed her Master's project in the field of cortical neuroprosthesis devices for artificial vision in collaboration with the Integrated Circuits Laboratory (ICLAB) at école Polytechnique Fédérale de Lausanne (EPFL) in Swit
Alexander MathisAlexander studied pure mathematics with a minor in logic and theory of science at the Ludwig Maximilians University in Munich. For his PhD also at LMU, he worked on optimal coding approaches to elucidate the properties of grid cells. As a postdoctoral fellow with Prof. Venkatesh N. Murthy at Harvard University and Prof. Matthias Bethge at Tuebingen AI, he decided to study olfactory behaviors such as odor-guided navigation, social behaviors and the cocktail party problem in mice. During this time, he increasingly got interested sensorimotor behaviors beyond olfaction and started working on proprioception, motor adaption, as well as computer vision tools for measuring animal behavior.
In his group, he is interested in elucidating how the brain gives rise to adaptive behavior. One of the major goals is to synthesize large datasets into computationally useful information. For those purposes, he develops algorithms and systems to analyze animal behavior (e.g. DeepLabCut), neural data, as well as creates experimentally testable computational models.
Athanasios NenesTeaching & PhD PhD Students Berkay Dönmez, Ernest Abboud Past EPFL PhD Students Paraskevi Georgakaki, Lucile Ricard Courses Atmospheric processes: from cloud to global scales ENV-407 The main objective is to present important atmospheric processes from the local to global scales. The course will start with cloud processes, continue to synoptic phenomena like extratropical cyclones and fronts, to finally cover numerical modeling at the regional and global scales. Introduction to environme
Bokeon KwakExpertise
Bio-inspired robotics, Edible Robotics, Soft Robotics
Daryl Yee Wei LiangIncoming Assistant Professor of Electrical and Microengineering (March 2023)
Julia SchmaleExpertise
atmospheric science, aerosol-cloud interactions, climate change in polar regions
Mission
Extreme environments are particularly sensitive to climate change and are transforming at accelerated rates. This can have important global repercussions. EERL aims to create integrated process understanding by investigating interactions between the atmosphere, cryosphere, biosphere, ocean, land and anthroposphere. The goal is to characterize climate-change relevant and vertically-resolved processes that are d
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
Yujia ZhangExpertise
Dropletronics: microscale droplet-based modular iontronics (e.g., batteries, diodes, transistors, memristors and circuits)Bioiontronics and bioelectronicsFunctional synthetic, cellular and hybrid tissuesBioengineering and human-machine interfaceAdvanced manufacturing of soft and living matter across multiple scales
2026 Masters Semester Project/Thesis, PhD and Postdoc Positions
Many opportunities exist in microengineering, bioengineering, materials science, microrobots, programming and AI; please
Tara HabibiCurrent Work
SafeShore ProjectPrincipal Investigator Climate change will lead to significant sea level rise and more frequent, intense storm surges. These developments pose severe risks to coastal regions, threatening human lives, cultural heritage, and economic stability. Conventional shoreline protection methods, such as seawalls and armour blocks, have proven effective. However, their reliance on heavy concrete makes them slow to construct and environmentally unsustainable. To address these challenges, t
Amine BenouhibaAmine Benouhiba graduated from the Preparatory School of Science and Technology, Algeria, in 2012. He received his engineering degree in material engineering from Ecole Nationale Polytechnique (ENP), Algeria, in 2015. He also received his master’s degree in innovative materials from Ecole centrale de Lyon (ECL) in 2016. He completed his Ph.D. degree in 2020 at the Bourgogne-Franche-Comté University. Currently, he is a postdoctoral researcher at Ecole polytechnique fédérale de Lausanne (EPFL). His research interests include the design and development of soft robotics, origami-inspired structures and microrobotics.
Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Virginia CarnevaliExpertise
Theoretical condensed matter physics: theory and simulations of structural, electronic, magnetic and optical properties (Quantum ESPRESSO), ab-initio molecular dynamics (CP2K), and Kinetic Monte Carlo codes; automate Quantum ESPRESSO workflows and high-throughput calculations (AFLOWÏ€); generation of tight-binding hamiltonians, transport properties, and data analysis (PAOFLOW).Materials for photovoltaic: Pb- and Sn-based organic perovskites; investigation and improvement of the HTL-ETL interaction
Simon HolzerHi, I am Simon Holzer. I received my B.Sc. and M.Sc. degrees in mechanical engineering with a focus on microtechnology from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2020 and 2022, respectively. I am currently working towards Ph.D. in the Integrated Actuators Laboratory (LAI) at EPFL in Neuchâtel, Switzerland. My research interests lie in the field of soft robotics, artificial muscles, and biomechanics.
Alisa DavydovaEducation BSc in Physics | Department of Theoretical physics, Classical and Quantum Field Theory 2015 – 2019 Lomonosov Moscow State University MSc in Photonics and Quantum Materials | Nanomaterials application for Nonlinear Optics 2019 – 2021 Skolkovo Institute of Science and Technology
Konstantinos KarapiperisKostas Karapiperis is an Assistant Professor at EPFL directing the Data-Driven Mechanics Laboratory (LMD). His research lies at the intersection of mechanics, multiscale modeling, and data science, with applications ranging from geomaterials to structural materials. Prior to EPFL, he worked as a Postdoctoral Researcher and Lecturer at the Department of Mechanical and Process Engineering of ETH Zürich, supported by a Marie Sklodowska-Curie Fellowship. He holds a PhD in Applied Mechanics and a Minor in Applie
Gioele La MannoTeaching & PhD PhD Students Albert Dominguez Mantes, Xinyi Huang, Laura Lapeña Gil, Alessandro Valente, Luca Fusar Bassini, Hao-An Hsiung, Alireza Gargoorimotlagh, Morgane Alice Storey, Rosan Martine Hans, María Cristina Loureiro Casalderrey, Lada Polyakova Past EPFL PhD Students Alex Russell Lederer, Irina Khven Past EPFL PhD Students as codirector Alexandre Coudray, Alex Russell Lederer, Halima Hannah Emilie Schede, Irina Khven Courses Biological data science I: statistical learning BIOENG-210
