Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Daniel Alexander Florez OrregoExpertise
• Exergy and Energy Integration of Chemical and Industrial Processes• Cogeneration and Polygeneration, Refrigeration and Heat Pumping Systems• Technical, Economic and Environmental Analyses• Refineries, Biorefineries, Fertilizers Complexes, Hydrogen and Synthetic Fuels (SNG, DME, MeOH, FT, H2, Power-to-X)• Second law of Thermodynamics and Irreversible Thermodynamics• Combustion, Heat Transfer, Computational Fluid Dynamics, Reaction design• Modeling and Optimization of Energy Conversion Systems• Ma
Giancarlo Ferrari TrecateExpertise
Automatic control, Dependable control, Neural-network Control, Machine learning, Microgrids, Hybrid systems
Mission
See the webpage of the DECODE (Dependable Control and Decision) group.
Teaching & PhD PhD Students Laura Meroi, Julien Pallage, Nicolas Léo Pierre Kirsch, Simone Baratto, Daniele Martinelli, Riccardo Cescon, Jakob Nylöf, Sabri El Amrani Past EPFL PhD Students Pulkit Nahata, Mustafa Sahin Turan, Baiwei Guo, Jean-Sébastien Brouillon, Clara Galimberti, Andrea Martin, Muhammad Zakwan,
Simon HolzerHi, I am Simon Holzer. I received my B.Sc. and M.Sc. degrees in mechanical engineering with a focus on microtechnology from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2020 and 2022, respectively. I am currently working towards Ph.D. in the Integrated Actuators Laboratory (LAI) at EPFL in Neuchâtel, Switzerland. My research interests lie in the field of soft robotics, artificial muscles, and biomechanics.
Bokeon KwakExpertise
Bio-inspired robotics, Edible Robotics, Soft Robotics
Olga FinkTeaching & PhD PhD Students Han Sun, Leandro Von Krannichfeldt, Keivan Faghih Niresi, Zepeng Zhang, Vinay Sharma, Chenghao Xu, Raffael Pascal Theiler, Kevin Antonio Steiner, Sergei Garmaev, Amaury Wei Past EPFL PhD Students Ismail Nejjar, Mengjie Zhao Courses Data Science for infrastructure condition monitoring CIVIL-332 The course will cover the relevant steps of data-driven infrastructure condition monitoring, starting from data acquisition, going through the steps pre-processing of real
Stefana ParaschoTeaching & PhD PhD Students Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Courses Capitalizing on Uncertainty AR-809 SUMMER SCHOOL - Capitalizing on Uncertainty is a 6-day Summer school exploring uncertainty as a productive resource in design and fabrication through lectures, hands-on experiments, and the collaborative design and construction of a full-scale structure in a human-robot fabrication setting. Digital design and making: A criti
Junsoo KimExpertise
Artificial Muscles, Electrostatic Actuators, Wearable Robotics, Humanoid Robotics
Simon Elias BibriExpertise
• Sustainable cities• Smarter eco-cities• Sustainable smart cities• Artificial Intelligence of Things (AIoT) • Generative Artificial Intelligence of Things (GAIoT)• Foundation Models (FMs) • Quantum Generative Artificial Intelligence (QGAI)• Urban Digital Twins (UDTs)• Urban Brain (UB) • Smart Circular Metabolism• Urban planning and design• Environmental sustainability and climate resilience• Sustainable smart energy• Sustainable smart transportation• Sustainable smart waste and water management•
Cyril Felix MonetteCyril Monette combines his interest in engineering with his passion for nature: During his bachelor's degree in microtechnology at EPFLausanne, he implemented technical study projects with a focus on the conservation of biodiversity. Cyril then worked at the GenoRobotics project on the development of mobile DNA sequencing methods. After volunteering in Uganda, he completed several internships in biodiversity conservation. With the start of his master's degree in Biorobotics at the University of Bristol, he
Ali MeimandiExpertise
Research interests:Analog and digital circuit designBiomedical circuits and systems
Ali Meimandi received B.Sc degree in electrical engineering from Amirkabir University of Technology(Tehran Polytechnic), Tehran, Iran, and M.Sc. degree in electronic engineering from Politecnico di Milano, Milan, Italy, in 2018 and 2022, respectively. He is a Research Assistant and doctoral candidate in the BioCMOS Interfaces(BCI) Laboratory at école Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.His res
Sangwoo KimSangwoo Kim is set to join EPFL as a Tenure Track Assistant Professor in September 2023. Prior to his appointment at EPFL, he served as a postdoctoral fellow in the Department of Mechanical Engineering at the University of California, Santa Barbara. He earned his graduate degree in Theoretical and Applied Mechanics from the University of Illinois at Urbana-Champaign, where his research delved into the relationships between statistics, geometry, and mechanical states in cellular matters. Currently, his research focus on fundamental understanding of biological and living systems, as well as the study of soft and active matter employing principles from mechanics and physics. His research interests encompass embryonic development, tissue morphogenesis, structure and mechanics of soft materials, inherent structure of amorphous materials, and non-equilibrium dynamics of active matter.
Konstantinos KarapiperisKostas Karapiperis is an Assistant Professor at EPFL directing the Data-Driven Mechanics Laboratory (LMD). His research lies at the intersection of mechanics, multiscale modeling, and data science, with applications ranging from geomaterials to structural materials. Prior to EPFL, he worked as a Postdoctoral Researcher and Lecturer at the Department of Mechanical and Process Engineering of ETH Zürich, supported by a Marie Sklodowska-Curie Fellowship. He holds a PhD in Applied Mechanics and a Minor in Applie
Amine BenouhibaAmine Benouhiba graduated from the Preparatory School of Science and Technology, Algeria, in 2012. He received his engineering degree in material engineering from Ecole Nationale Polytechnique (ENP), Algeria, in 2015. He also received his master’s degree in innovative materials from Ecole centrale de Lyon (ECL) in 2016. He completed his Ph.D. degree in 2020 at the Bourgogne-Franche-Comté University. Currently, he is a postdoctoral researcher at Ecole polytechnique fédérale de Lausanne (EPFL). His research interests include the design and development of soft robotics, origami-inspired structures and microrobotics.
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Adriano MeleI am a control engineer and plasma scientist at the Swiss Plasma Center of the École Polytechnique Fédérale de Lausanne.I am also Research Topic Coordinator in the EUROfusion Tokamak Exploitation WorkPackage, for the Research Topic 04: Physics-based machine generic systems for an integrated control of plasma discharge, and an Associate Editor in the Franklin Open journal.In 2022-2023, I have been an Assistant Professor in Automatic Control at the University of Tuscia, Viterbo.Before that, from 2019 to 2021,
Savvas SaloustrosEducation PhD | Construction Engineering 2017 – 2017 UPC-BarcelonaTech, Spain MSc | Structural Analysis of Monuments and Historical Constructions (SAHC) 2013 – 2013 University of Padova, Italy & UPC-BarcelonaTech, Spain Diploma | Civil Engineering 2012 – 2012 National Technical University of Athens, Greece Professionals experiences Co-founder & Board Member 2019–2019 FENECStructural Engineer 2019–2019 Windmill Structural Constultants, Barcel
