Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Jakob HeierTeaching & PhD PhD Students Vahid Charkhesht Past EPFL PhD Students as codirector Nicolas Alexandre Serge Leclaire, Donatas Gesevicius, Surendra Babu Anantharaman, Sina Abdolhosseinzadeh, Shungui Deng Courses Modern photovoltaic technologies PHYS-609 A link between the fundamental physics, device operation and technological development of various solar cell technologies. Learning about all modern photovoltaic technlogies incl. industrially relevant wafer based silicon, thin film chalcogeni
Francesco GramugliaFrancesco Gramuglia received the MEng degree in Electronics and Electrical Engineering from the Politecnico di Milano in 2016. From 2015 to 2016 he was a trainee in the STORMlab of Vanderbilt University, Nashville, Tennessee, where he worked on the development of robotic endoscope platforms. In 2016 he received the Best Application Prize and Overall Winner at Surgical Robot Challenge during the Hamlyn Symposium on Medical Robotics at Imperial College, London, 2016. Since 2017, he has been pursuing a Ph.D. degree at the EPFL in the Advanced Quantum Architecture laboratory (AQUA) under the advising of Prof. Edoardo Charbon and Claudio Bruschini, PhD. His research is focused on the design of SPAD based CMOS image sensors and system development for use in biomedical applications, e.g. Time-of-flight Positron emission tomography (TOFPET).
Andrea VezzosiAndrea Vezzosi is a postdoctoral researcher in the group of Prof. Ursula Rothlisberger at the Institute of Chemical Sciences and Engineering, EPFL (Switzerland). He earned his Ph.D. in Physics and Nanosciences from the University of Modena and Reggio Emilia in 2024, where he investigated spin–orbit coupling and topological states in core–shell semiconductor nanowires. During his doctoral studies, he developed nwkp, an open-source Python library for computing the band structure of core–shell nanowires using
Anja TiedePronouns
she/her
I am a researcher at the interface of photonics and materials science; my interests and research contributions relate to the use of correlated-disordered structures for light management for ultra-thin film photovoltaic applications. This interdisciplinary research requires expertise in both simulation and nanofabrication of semiconductor devices. My career started in Germany, with a degree in microsystems engineering from the University of Applied Sciences of Regensburg and a master's in ph
Ali MeimandiExpertise
Research interests:Analog and digital circuit designBiomedical circuits and systems
Ali Meimandi received B.Sc degree in electrical engineering from Amirkabir University of Technology(Tehran Polytechnic), Tehran, Iran, and M.Sc. degree in electronic engineering from Politecnico di Milano, Milan, Italy, in 2018 and 2022, respectively. He is a Research Assistant and doctoral candidate in the BioCMOS Interfaces(BCI) Laboratory at école Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.His res
Vivek SubramanianTeaching & PhD PhD Students Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar Past EPFL PhD Students Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed Past EPFL PhD Students as codirector Mohammad Jafarpour Courses Organic and printed electronics MICRO-505 This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide
Daniel Alexander Florez OrregoExpertise
• Exergy and Energy Integration of Chemical and Industrial Processes• Cogeneration and Polygeneration, Refrigeration and Heat Pumping Systems• Technical, Economic and Environmental Analyses• Refineries, Biorefineries, Fertilizers Complexes, Hydrogen and Synthetic Fuels (SNG, DME, MeOH, FT, H2, Power-to-X)• Second law of Thermodynamics and Irreversible Thermodynamics• Combustion, Heat Transfer, Computational Fluid Dynamics, Reaction design• Modeling and Optimization of Energy Conversion Systems• Ma
Simone IadanzaTeaching & PhD Courses Nanophotonics MICRO-516 Students understand and apply the physics of the interaction of light with semiconductors. They understand the operating mechanism of scaled photonic devices such as photodetectors, LEDs and lasers, as well as challenges and opportunities relating to their integration and dimensional scaling.
Virginia CarnevaliExpertise
Theoretical condensed matter physics: theory and simulations of structural, electronic, magnetic and optical properties (Quantum ESPRESSO), ab-initio molecular dynamics (CP2K), and Kinetic Monte Carlo codes; automate Quantum ESPRESSO workflows and high-throughput calculations (AFLOWÏ€); generation of tight-binding hamiltonians, transport properties, and data analysis (PAOFLOW).Materials for photovoltaic: Pb- and Sn-based organic perovskites; investigation and improvement of the HTL-ETL interaction
Christian André Clément LafforgueTeaching & PhD Courses Electrical engineering science & technology EE-106 This course introduces the fundamental laws of electricity and the methods for analyzing linear electrical circuits, consisting of resistors, capacitors and inductors. We will start with the Direct Current circuits and then switch to single-phase and three-phase Alternating Current circuits.
Zheru QiuBefore joining LPQM, I graduated from University of Science and Technology of China with a bachelor's degree. In USTC, I actively worked in Prof. Zheng-tian Lu's research group and I mainly participated in the atomic magnetometer project led by Prof. Dong Sheng.
Athanasios NenesTeaching & PhD PhD Students Berkay Dönmez, Ernest Abboud Past EPFL PhD Students Paraskevi Georgakaki, Lucile Ricard Courses Atmospheric processes: from cloud to global scales ENV-407 The main objective is to present important atmospheric processes from the local to global scales. The course will start with cloud processes, continue to synoptic phenomena like extratropical cyclones and fronts, to finally cover numerical modeling at the regional and global scales. Introduction to environme
Du WenEducation PhD | Doctor of Philosophy, Mechanical Engineering 2020 – 2023 The University of Tokyo MEng | Master of Engineering, Power Engineering and Engineering Thermophysics 2016 – 2019 Xi’an Jiaotong University Bsc | Bachelor of Engineering 2012 – 2016 Xi’an Jiaotong University
Amir JafargholiTeaching & PhD PhD Students Senlu Zhou Courses Antennas EE-446 The students will first learn the fundamental principles governing antennas and get familiar with the main antenna types. In the second part, students will work in groups on an antenna design project. Through this, they will learn to use common simulation tools, and perform antenna measurements
Giancarlo Ferrari TrecateExpertise
Automatic control, Dependable control, Neural-network Control, Machine learning, Microgrids, Hybrid systems
Mission
See the webpage of the DECODE (Dependable Control and Decision) group.
Teaching & PhD PhD Students Laura Meroi, Julien Pallage, Nicolas Léo Pierre Kirsch, Simone Baratto, Daniele Martinelli, Riccardo Cescon, Jakob Nylöf, Sabri El Amrani Past EPFL PhD Students Pulkit Nahata, Mustafa Sahin Turan, Baiwei Guo, Jean-Sébastien Brouillon, Clara Galimberti, Andrea Martin, Muhammad Zakwan,
Valerio PiazzaTeaching & PhD PhD Students Claire Valentine Blaga, Matilde Cantele, Julia Sarah Marhic Past EPFL PhD Students as codirector Michele Zendrini Courses Functional properties of materials MSE-210 The main objective of this course is to present the concepts allowing the understanding of the fundamental principles that enable to predict the properties of the materials. The goal is that with these concepts, one will be able to realize material design and/or to understand novel materials.
