Publications by Steven Van Petegem

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The stress and strain relationship in the gauge region of six cruciform geometries is studied: the ISO standard geometry with slits in arms, two geometries with thinned gauge areas, two geometries with thinned gauge areas and slits in arms, and one modifie ...

Bulk metallic glasses (BMGs) are high-strength, highly elastic materials due to their disordered atomic structure. Because BMGs require sufficiently high cooling rates to bypass crystallization, laser-based additive manufacturing (AM) methods have recently ...

A multi-scale elastic-plastic finite element and fast Fourier transform based approach is proposed to study lattice strain evolution during uniaxial and biaxial loading of stainless steel cruciform shaped samples. At the macroscale, finite element simulati ...

Laser based additive manufacturing allows to build a designed shape layer-by-layer, offering versatility and flexibility to many metallurgical sectors. The fast cooling rates and repeated heat cycles depending on the laser and scanning parameters are not e ...

The stress-induced fcc-austenite to hcp-martensite transformation in the iron based shape memory alloy (SMA) Fe-17Mn-5Si-10Cr-4Ni with and without VC precipitates is investigated by in-situ neutron diffraction measurements upon uniaxial loading and unloadi ...

Precursors of failure are dislocation mechanisms at the nanoscale and dislocation organization at the mesoscale responsible for long-range internal stresses and lattice rotation. Detailed information on the link between both scales is missing, computationa ...

The output obtained from operando X-ray diffraction experiments on Ti-6Al-4V is used to verify the accuracy of four FEM models in predicting the temperature evolution of the solidified domain, the cooling rates of the alpha and beta phases, and the influen ...

Manufacturing of red gold components relies widely on controlling the formation of ordered precipitates during thermo-mechanical processing. The ordered phase hardens the material, makes it less workable and introduces residual stresses. We show that an in ...

Precious alloys are subjected to a series of mechanical and thermal operations during manufacturing. For 18 carat gold alloys the processing operations can induce L1(0) ordered nanodomains, known to lead to the buildup of residual stresses, which are the p ...

While propagation of dislocations in body centered cubic metals at low temperature is understood in terms of elementary steps on {110} planes, slip traces correspond often with other crystallographic or non-crystallographic planes. In the past, characteriz ...

Neutron and synchrotron X-ray diffraction spectra have been acquired during room temperature tensile deformation of a creep-resistant bainitic 1% CrMoV steel, in order to study the evolution of internal microstresses and load-sharing mechanisms between the ...

Deformation in nanocrystalline (NC) materials is strongly influenced by the presence of a large fraction of grain boundaries. We present a comparative study on the role of intragranular root-mean-square strain and crystal-lographic texture on recovery proc ...

Low-temperature deformation of body-centered cubic metals shows a significant amount of plastic slip on planes with low shear stresses, a phenomenon called anomalous slip. Despite progress in atomistic modeling of the consequences of complex stress states ...

We investigate various microstructural features of nanocrystalline electrodeposited Ni-Fe with a nominal iron content of 50% and compare them with the well-known nanocrystalline Ni system. In-depth electron microscopy analysis reveals the existence of larg ...

We report on the diffraction peak shape evolution from cementite particles in three steel microstructures, recorded during in-situ tensile deformation at room temperature. We demonstrate that in a bainitic tempered steel the observed peak broadening and as ...

The mechanical behaviour of nanocrystalline austenitic steels with and without yttria particles was investigated using in situ synchrotron diffraction during tensile deformation. Two different strain-hardening regimes were found. The first regime can be as ...

We report on the development of a miniaturized device for operando X-ray diffraction during laser 3D printing. The printing chamber has a size of only 130 x 135 x 34 mm(3) and is optimized to be installed at synchrotron beamlines. We describe the design co ...

Deformation mechanisms in nanocrystalline electrodeposited Ni (26 nm) and Ni-Fe (12 nm) are studied by strain rate sensitivity experiments and in situ mechanical testing during X-ray diffraction. We find a relatively low strength for Ni-Fe, which may be as ...

Predicting the macroscopic and microscopic mechanical response of metals and alloys subjected to complex loading conditions necessarily requires a synergistic combination of multiscale material models and characterization techniques. This article focuses o ...

This work reports on the microstructure and mechanical properties of porous silver films produced with different sintering parameters. The microstructure is investigated by high-resolution ptychographic Xray computed tomography and scanning electron micros ...

Steven Van Petegem

Chat with Graph Search

Stresses and Strains in Cruciform Samples Deformed in Tension

Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion

Study of lattice strain evolution during biaxial deformation of stainless steel using a finite element and fast Fourier transform based multi-scale approach

Operando X-ray diffraction during laser 3D printing

Characterization of the deformation and phase transformation behavior of VC-free and VC-containing FeMnSi-based shape memory alloys by in situ neutron diffraction

Following dislocation patterning during fatigue

Verification of selective laser melting heat source models with operando X-ray diffraction data

Enhanced precipitate growth at reduced temperatures during chemical ordering in deformed red gold alloys

Influence of thermo-mechanical history on the ordering kinetics in 18 carat Au alloys

{110} Slip with {112} slip traces in bcc Tungsten

In situ room temperature tensile deformation of a 1% CrMoV bainitic steel using synchrotron and neutron diffraction

An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel

Origin of Anomalous Slip in Tungsten

Microstructure and deformation mechanisms in nanocrystalline Ni-Fe. Part I. Microstructure

On the origin of cementite diffraction peak broadening during tensile deformation at ambient temperatures

Two strain-hardening mechanisms in nanocrystalline austenitic steel: An in situ synchrotron X-ray diffraction study

A miniaturized selective laser melting device for operando X-ray diffraction studies

Microstructure and deformation mechanisms in nanocrystalline Ni-Fe. Part II. In situ testing during X-ray diffraction

Intergranular Strain Evolution During Biaxial Loading: A Multiscale FE-FFT Approach

Deformation behavior of nanoporous polycrystalline silver. Part I: Microstructure and mechanical properties