Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Olivier MartinOlivier J.F. Martin received the M.Sc. and Ph.D. degrees in physics in 1989 and 1994, respectively, from the Swiss Federal Institute of Technology, Lausanne (EPFL), Switzerland. In 1989, he joined IBM Zurich Research Laboratory, where he investigated thermal and optical properties of semiconductor laser diodes. Between 1994 and 1997 he was a research staff member at the Swiss Federal Institute of Technology, Zurich (ETHZ). In 1997 he received a Lecturer fellowship from the Swiss National Science Foundation (SNSF). During the period 1996-1999, he spent a year and a half in the U.S.A., as invited scientist at the University of California in San Diego (UCSD). In 2001 he received a Professorship grant from the SNSF and became Professor of Nano-Optics at the ETHZ. In 2003, he was appointed Professor of Nanophotonics and Optical Signal Processing at the Swiss Federal Institute of Technology, Lausanne (EPFL), where he is currently head of the Nanophotonics and Metrology Laboratory and Director of the Microengineering Section.
Jonathan GravesProf. Jonathan P. Graves is a Senior Scientist at EPFL and Honorary Visiting Professor at the University of York, UK. He achieved first class joint honours in Electronic Engineering and Mathematics from the University of Nottingham, UK in 1996. He completed his Ph.D. in Theoretical Mechanics from the University of Nottingham, UK, three years later in 1999. During his Ph.D. he was based in the Culham theory group of the United Kingdom Atomic Energy Authority, developing kinetic descriptions of the internal kink instability, and participating in deuterium-tritium experimental analysis in the Joint European Torus. After a short time in industry, and a postdoc at Nottingham University, he took a position at the Swiss Plasma Center at EPFL, becoming a Senior Scientist in 2014, and became an Honorary Visiting Professor at the University of York, UK, in 2020. In 2015 he became a member of the EUROfusion Scientific and Technical Advisory Committee (STAC) and a member of the EUROfusion DEMO Technical Advisory Group. He is on the editorial board for the journal Plasma Physics and Controlled Fusion, and in 2020 became Scientific Secretary of the Varenna-Lausanne International Workshop in Theory of Fusion Plasmas.
Jiannong FangExpertise
Computational Fluid Dynamics; High Performance Computing; Groundwater Flow and Transport; Rheology of Complex Fluids
Current work
Large Eddy Simulation; Immersed Boundary Method; Fast Projection Methods for Incompressible Flows; Wind Power Forecasting
Teaching & PhD Past EPFL PhD Students Marco Giovanni Giometto Past EPFL PhD Students as codirector Gaofeng Zhao
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Demetri PsaltisResearch group
Teaching & PhD PhD Students Victoria Fay, Colin Nikhil Christian Past EPFL PhD Students Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç Past EPFL PhD
Paolo PeronaExpertise
River mechanics and morphoydnamics, Erosion processes, Ecohydraulics, Plant roots biomechanics, Watershed and catchment hydrology, Water Resources Management, General hydraulics, Time Series Analysis, Dynamical Systems Theory, Stochastic Processes
Expertise
River mechanics and morphoydnamics, Erosion processes, Ecohydraulics, Plant roots biomechanics, Watershed and catchment hydrology, Water Resources Management, General hydraulics, Time Series Analysis, Dynamical Systems Theory, Stochastic Proces
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Frédéric MilaExpertise
Condensed matter theory, strongly correlated systems, frustrated and quantum magnetism, tensor networks
Mission
Perform research in condensed matter theory, whenever possible in collaboration with experimentalists at EPFL and throughout the world
Current Work
- Magnetism on the Shastry-Sutherland lattice- Tensor network approach to 2D strongly correlated systems- Thermal properties of 2D frustrated quantum magnets- Exotic phases of quantum one-dimensional models
Since 2003 Full Professor at EPFL (
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Guillaume AnciauxResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t
Herbert SheaExpertise
soft robotics, wearable haptics, electrostatic actuators, EHD
Mission
My lab develops flexible polymer-based actuators for a wide range of applications including haptics and soft robotics. More info at https://www.epfl.ch/labs/lmts/
Links from EPFL-LMTS Lab webpage People Research ActivitiesPublications TeachingPublications and Conference papers Link to my lab Education PhD | Physics 1997 – 1997 Harvard University MA | Physics 1993 – 1993 Harvard University Christophe AnceyChristophe Ancey has both a PhD and an engineering degree granted by the Ecole Centrale de Paris and the Grenoble National Polytechnic Institute. Trained as a hydraulics engineer, he did his doctoral work under the supervision of Pierre Evesque from 1994 to 1997 on rheology of granular flows in simple shearing. He was recruited in 1998 as a researcher in rheology at the Cemagref as part of the Erosion Protection team directed by Jean-Pierre Feuvrier, which has since become the laboratoire "Storm Erosion, Snow and Avalanche Laboratory". Parallel to this research activity, with Claude Charlier He set up a consulting firm for engineering contracting called Toraval (www.toraval.fr), which has become the major player in the avalanche field in France. Since 2004, He is a fluid-mechanics professor at EPFL and he is the director of the Environmental Hydraulics Laboratory.
He is associate editor of Water Resources Research, one of the leading journal in the field. David Andrew BarryResearch InterestsSubsurface hydrology, constructed wetlands, ecological engineering, in particular contaminant transport and remediation of soil and groundwater; more generally, models of hydrological and vadose zone processes; application of mathematical methods to hydrological processes; coastal zone sediment transport, aquifer-coastal ocean interactions; hydrodynamics and modelling of lakes.
