Home

Person

Jamasp Jhabvala

This person has left EPFL

About
Privacy
Disclaimer

Graph Chatbot

Related publications (26)

Page 1 of 2

Study of the consolidation process under macro- and microscopic thermal effects in selective laser sintering and selective laser melting

Jamasp Jhabvala

Selective Laser Sintering (SLS) and Selective Laser Melting (SLM) are parent Additive Manufacturing processes using a laser to solidify metallic, ceramic, polymer or composite powders. During the process, the object is built layer by layer. A laser source ...

EPFL2010

Acoustic emission for the prediction of processing regimes in Laser Powder Bed Fusion, and the generation of processing maps

Roland Logé, Jamasp Jhabvala, Charlotte Léopoldine de Formanoir de la Cazerie, Rita Drissi Daoudi

The Laser Power Bed Fusion (LPBF) process is of high interest to many industries, such as motors and vehicles, robotics, biomedical applications, aerospace, and others. LPBF workpieces can indeed achieve near full density and high resistance. However, a la ...

ELSEVIER2023

Understanding variant selection and texture in additively manufactured red-gold alloys

Roland Logé, Cyril Cayron, Jamasp Jhabvala, Eric Boillat, Hossein Ghasemi Tabasi

Printing gold alloys parts is a challenge due to the high reflectivity and thermal conductivity of these materials. Recent studies show an improvement in printing gold using the Laser Powder Bed Fusion (L-PBF) process; however, the impact of the A1 -> L1(0 ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Direct observation of crack formation mechanisms with operando Laser Powder Bed Fusion X-ray imaging

Roland Logé, Helena Van Swygenhoven, Jamasp Jhabvala, Eric Boillat, Navid Sohrabi, Hossein Ghasemi Tabasi, Charlotte Léopoldine de Formanoir de la Cazerie, Samy Hocine

Laser powder bed fusion (L-PBF) is a versatile additive manufacturing process that can print geometrically complex metal parts for a variety of applications. However, poor control of defect formation during processing hampers its widespread industrial adop ...

ELSEVIER2022

Acoustic emission signature of martensitic transformation in laser powder bed fusion of Ti6Al4V-Fe, supported by operando X-ray diffraction

Roland Logé, Jamasp Jhabvala, Mathijs Pieter van der Meer, Milad Hamidi Nasab, Reza Esmaeilzadeh, Claire Navarre, Charlotte Léopoldine de Formanoir de la Cazerie, Lucas Maximilian Schlenger

This study focuses on investigating Acoustic Emission (AE) monitoring in the Laser Powder Bed Fusion (LPBF) process, using premixed Ti6Al4V-(x wt%) Fe, where x = 0, 3, and 6. By employing a structure-borne AE sensor, we analyze AE data statistically, uncov ...

2024

Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Annapaola Parrilli

In the past few years, laser powder-bed fusion (LPBF) of bulk metallic glasses (BMGs) has gained significant interest because of the high heating and cooling rates inherent to the process, providing the means to bypass the crystallization threshold. In thi ...

MDPI2021

Toward Architected Microstructures Using Advanced Laser Beam Shaping in Laser Powder Bed Fusion of Ti-6al-4v

Roland Logé, Cyril Cayron, Jamasp Jhabvala, Eric Boillat, Mathijs Pieter van der Meer, Reza Esmaeilzadeh, Lucas Maximilian Schlenger, Seyed Amirmohammad Jamili, Junfeng Xiao

Laser Powder Bed Fusion (LPBF) stations mostly use lasers with a Gaussian beam intensity distribution, as it has advantages like small divergence and high ability to be focused. This distribution creates significant thermal gradients leading to high coolin ...

WILEY-V C H VERLAG GMBH2025

Fast and accurate laser powder bed fusion metamodels predicting melt pool dimensions, effective laser absorptivity and lack of fusion defects

Roland Logé, Jamasp Jhabvala, Eric Boillat, Milad Hamidi Nasab, Reza Esmaeilzadeh, Claire Navarre, Lucas Maximilian Schlenger

The significant computational expenses associated with simulating the Laser Powder Bed Fusion (LPBF) process often restrict the insights gained from modeling endeavors to specific combinations of process parameters, hindering broader conclusions. In this s ...

2025

Additive manufacturing of a precious bulk metallic glass

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Güven Kurtuldu, Annapaola Parrilli

For the first time, a high-density amorphous and crack-free bulk metallic glass (BMG) based on a precious metal (PdCuNiP) was produced via additive manufacturing (AM). Laser powder-bed fusion (LPBF) was used for the fabrication of the samples, and led to a ...

2021

Laser coating of a Zr-based metallic glass on an aluminum substrate

Roland Logé, Stefano Mischler, Jamasp Jhabvala, Navid Sohrabi, Alejandro Roda Buch

Cladding of a Zr-based metallic glass (MG) on an aluminum substrate was conducted using a layer-wise laser additive manufacturing (AM) method, leading to relative densities higher than 99%. The thickness of the cladding was about 300 μm. The effect of lase ...

2020

The role of nanocrystalline binder metallic coating into WC after additive manufacturing

Jamasp Jhabvala, Eric Boillat

Tungsten carbide with microsized particle powders are commonly used embedded in a tough binder metal. The application of these composites is not limited to cutting tools, WC based material has been increasingly used in gaskets and other mechanical parts wi ...

Elsevier2018

Quantitative prediction of crystallization in laser powder bed fusion of a Zr-based bulk metallic glass with high oxygen content

Roland Logé, Jamasp Jhabvala, Navid Sohrabi, Hossein Ghasemi Tabasi, Toni Ivas

One of the main challenges in the fabrication of bulk metallic glasses (BMGs) via laser-based additive manufacturing (AM) is undesirable crystal phase formation, which usually deteriorates the mechanical properties of the BMG fabricated parts. Understandin ...

Elsevier Sci Ltd2024

Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

The major challenge to overcome when processing metallic glasses (MGs) is to avoid crystallization. Therefore, time-temperature-transformation (TTT) diagrams are used, but they are often derived from experiments in which heating or cooling rates are limite ...

2021

An innovative method to build support structures with a pulsed laser in the selective laser melting process

Rémy Glardon, Jamasp Jhabvala, Eric Boillat, Cédric André

In selective laser melting machines, continuous laser are usually used to melt the powder. The support structures, which are inevitable when dealing with elaborated pieces, necessitate a complex design by CAD in order to be easily removed. This paper propo ...

Springer-Verlag2012

Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

Bulk Metallic Glasses (BMG) are metallic alloys that have the ability to solidify in an amorphous state. BMGs show enhanced properties, for instance, high hardness, strength, and excellent corrosion and wear resistance. BMGs produced by conventional method ...

MDPI2021

Laser powder-bed fusion of a high entropy alloy with outstanding intrinsic mechanical properties

Roland Logé, Cyril Cayron, Jamasp Jhabvala, Navid Sohrabi, Václav Pejchal

In the past few years, laser powder-bed fusion (LPBF) of high entropy alloys (HEAs) has gained significant interest. We investigated a HEA (PdPtRhIrCuNi) elaborated by LPBF, and studied its microstructure and mechanical properties. This alloy has potential ...

ELSEVIER SCIENCE SA2023

Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion

Roland Logé, Steven Van Petegem, Jamasp Jhabvala, Antonia Neels, Güven Kurtuldu, Navid Sohrabi, Annapaola Parrilli

Bulk metallic glasses (BMGs) are high-strength, highly elastic materials due to their disordered atomic structure. Because BMGs require sufficiently high cooling rates to bypass crystallization, laser-based additive manufacturing (AM) methods have recently ...

2020

Formation mechanism and microstructural characteristics of a body-centered cubic phase in 3D printed 316L–CuCrZr multi-material structures, combining laser powder bed fusion with foils

Roland Logé, Cyril Cayron, Jamasp Jhabvala, Seyed Amirmohammad Jamili

Additive manufacturing of 316L/CuCrZr multi-material metallic structures has recently attracted significant attention, due to the ideal combination of structural and thermal/electrical properties. In this work, a unique multi-phase microstructure was produ ...

2025

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020

An effective rule for translating optimal selective laser melting processing parameters from one material to another

Roland Logé, Jamasp Jhabvala, Eric Boillat, Hossein Ghasemi Tabasi, Rita Drissi Daoudi, Toni Ivas

Selective Laser Melting (SLM) or Laser Powder Bed Fusion (L-PBF) is the most studied laser-based additive manufacturing process for metals and alloys. One important issue in SLM is the time-consuming identification of a process window leading to quasi full ...

2020