Mirko KovacExpertise
Aerial RoboticsEnvironmental SensingSustainability RoboticsPhysical Artificial Intelligence
Short Biography Prof. Mirko Kovač is Director of the Laboratory of Sustainability Robotics, jointly appointed at the Swiss Federal Laboratories for Materials Science and Technology (Empa) in Zürich and the Swiss Federal Institute of Technology Lausanne (EPFL). He holds an Honorary Professorship at Imperial College London, where he previously served as Full Professor and founded the Aerial Robotics Laborator
Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
Antonin FaesExpertise
Research in Energy Field a) Fuel Cell (SOFC) b) Organic Photovoltaic Cell TEM & SEM imaging and analysis
Mission
Team Leader on PV Modules and Reliability at EPFL PV-Lab
Dr. Antonin Faes is leading the PV Module and Reliability activity at EPFL PV-Lab and Solar Mobility Area Manager at CSEM Sustainable Energy Center. He graduated as materials science engineer at EPFL in Lausanne and got his PhD in 2010 on Solix Oxide Fuel cells. From 2012, he developed the advanced Smart-Wire Connection Technology
Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Michaël UnserExpertise
Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution
Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,
Michael StuerMission
Study effects of dopants and structural defects on the microstructure development and the optical properties of transparent ceramics.
Teaching & PhD PhD Students Katerina Urbancová, Annalena Erlacher Courses Advanced ceramic technologies MSE-495 Advanced ceramic processing concepts and technologies will be presented. Students will learn concepts on advanced technologically-relevant ceramic materials for a wide range of applications from MedTech, energy conversion & storage, with in
Niels QuackProf. Dr. Niels Quack received the M.Sc. degree from Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, in 2005, and the Dr.Sc. degree from Eidgenössische Technische Hochschule Zürich (ETH), Zürich, Switzerland, in 2010. From 2011 to 2015, he was Postdoctoral Researcher and Visiting Scholar with the Integrated Photonics Laboratory, Berkeley Sensor and Actuator Center, University of California, Berkeley, CA, USA. From 2014 to 2015, he was Senior MEMS Engineer with Sercalo Microtechnology, Neuchâtel, Switzerland. He is currently an SNSF Assistant Professor with Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland. He has authored and co-authored more than 50 papers in leading technical journals and conferences. His research interests include photonic micro and nanosystems, with an emphasis on diamond photonics and silicon photonic MEMS. He is Steering Committee Member of the IEEE International Conference on Optical MEMS and Nanophotonics (OMN) and served as General Chair of the IEEE OMN 2018 and the Latsis Symposium 2019 on Diamond Photonics. He is a Senior Member of IEEE, Member of The Optical Society (OSA) and life member of SPIE.
Stefano CodaTeaching & PhD PhD Students Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino Past EPFL PhD Students Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Demetri PsaltisResearch group
Teaching & PhD PhD Students Victoria Fay, Colin Nikhil Christian Past EPFL PhD Students Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç Past EPFL PhD
