Jean-Philippe HoggeTeaching & PhD PhD Students Constant Philippe Panisset, Pierrick Paul Louis Giroud-Garampon Past EPFL PhD Students Sudheer Kumar Jawla, Guillaume Michel Le Bars Past EPFL PhD Students as codirector Falk Braunmüller Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined th
Stefano CodaTeaching & PhD PhD Students Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino Past EPFL PhD Students Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Olivier SauterTeaching & PhD PhD Students Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne Past EPFL PhD Students Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders, Stefano Marchioni, F
Yves MartinTeaching & PhD Past EPFL PhD Students as codirector Francesco Piras, Jonathan Rossel Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Tobias KippenbergTobias J. Kippenberg is Full Professor of Physics at EPFL and leads the Laboratory of Photonics and Quantum Measurement. He obtained his BA at the RWTH Aachen, and MA and PhD at the California Institute of Technology (Caltech in Pasadena, USA). From 2005- 2009 he lead an Independent Research Group at the MPI of Quantum Optics, and is at EPFL since. His research interest are the Science and Applications of ultra high Q microcavities; in particular with his research group he discovered chip-scale Kerr frequency comb generation (Nature 2007, Science 2011) and observed radiation pressure backaction effects in microresonators that now developed into the field of cavity optomechanics (Science 2008). Tobias Kippenberg is alumni of the “Studienstiftung des Deutschen Volkes”. For his invention of “chip-scale frequency combs” he received he Helmholtz Price for Metrology (2009) and the EFTF Young Investigator Award (2010). For his research on cavity optomechanics, he received the EPS Fresnel Prize (2009). In addition he is recipient of the ICO Prize in Optics (2014), the Swiss National Latsis award (2015), the German Wilhelm Klung Award (2015) and ZEISS Research Award (2018). He is fellow of the APS and OSA, and listed since 2014 in the Thomas Reuters highlycited.com in the domain of Physics. EDUCATION 2009: Habilitation (Venia Legendi) in Physics, Ludwig-Maximilians-Universität München 2004: PhD, California Institute of Technology (Advisor Professor Kerry Vahala) 2000: Master of Science (Applied Physics), California Institute of Technology 1998: BA in Physics, Technical University of Aachen (RWTH), Germany 1998: BA in Electrical Engineering, Technical University of Aachen (RWTH), Germany ACADEMIC POSITIONS 2013 - present: Full Professor EPFL 2010 - 2012: Associate Professor EPFL 2008 - 2010: Tenure Track Assistant Professor, Ecole Polytechnique Federale de Lausanne 2007 - present: Marie Curie Excellent Grant Team Leader, Max Planck Institute of Quantum Optics (Division of Prof.T.W. Hänsch) 2005 - present: Leader of an Independent Junior Research Group, Max Planck Institute 2005- present: Habilitant (Prof. Hänsch) Ludwig-Maximilians-Universität (LMU) 2005-2006: Postdoctoral Scholar, Center for the Physics of Information, California Institute of Technology 2000-2004: Graduate Research Assistant, California Institute of Technology PRIZES AND HONORS: ZEISS Research Award 2018 Fellow of the APS 2016 Klung-Wilhelmy Prize 2015 Swiss Latsis Prize 2014 Selected Thomson Reuters Highly Cited Researcher in Physics, 2014/2015 ICO Prize, 2013 EFTF Young Scientist Award (for "invention of microresonator based frequency combs") 2010 Fresnel Prize of the European Physical Society (for contributions to Optomechanics) 2009 Helmholtz Prize for Metrology (for invention of the monolithic frequency comb) 2009 1st Prize winner of the EU Contest for Young Scientists, Helsinki, Finland. Sept. 1996 Jugend forscht 1st Physics Prize at the German National Science Contest May 1996 FELLOWSHIPS Fellow of the German National Merit Foundation ("Studienstiftung des Deutschen Volkes") 1998-2002 Member of the Daimler-Chysler-Fellowship-Organization 1998-2002 Dr. Ulderup Fellowship 1999-2000 RESEARCH INTERESTS Experimental and theoretical research in photonics, notably high Q optical microcavities and their use in cavity quantum optomechanics and frequency metrology PUBLICATIONS AND OFTEN CITED METRICS*: >70 Publications in peer reviewed journals Researcher Google Profile: http://scholar.google.ch/citations?user=PRCbG2kAAAAJ&hl=en h-Index 54 (Google scholar H: 64, >25,000 citations) Thomson Reuters/Claravite List of Highly Cited Researchers (2014,2015,2016,2017) careful in its use: https://www.aps.org/publications/apsnews/201411/backpage.cfm KEY PUBLICATIONS AND REVIEWS: A. Ghadimi, et al. Elastic strain engineering for ultra high Q nanomechanical oscillators Science, (2018) Trocha, et al. Ultrafast distance measurements using soliton microresonator frequency combs Science, Vol. 359 (2018) [joint work with C. Koos] Pablo-Marin et al. Microresonator-based solitons for massively parallel coherent optical communications Nature (2017) [joint work with C. Koos] V. Brasch, et al. Photonic chip-based optical frequency comb using soliton Cherenkov radiation. Science, vol. 351, num. 6271 (2015) Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Reviews of Modern Physics 86, 1391-1452, (2014) Wilson, D. J. et al. Measurement and control of a mechanical oscillator at its thermal decoherence rate. Nature (2014). Verhagen, E., Deleglise, S., Weis, S., Schliesser, A. & Kippenberg, T. J. Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature 482, 63-67 (2012). Kippenberg, T. J., Holzwarth, R. & Diddams, S. A. Microresonator-based optical frequency combs. Science 332, 555-559, (2011). Weis, S. et al. Optomechanically induced transparency. Science 330, 1520-1523 (2010). Kippenberg, T. J. & Vahala, K. J. Cavity optomechanics: back-action at the mesoscale. Science 321, 1172-1176, (2008). Del'Haye, P. et al. Optical frequency comb generation from a monolithic microresonator. Nature (2007) Schliesser, A., DelHaye, P., Nooshi, N., Vahala, K. & Kippenberg, T. Radiation Pressure Cooling of a Micromechanical Oscillator Using Dynamical Backaction. Physical Review Letters 97, (2006). Ugo SiravoTeaching & PhD Courses Fusion and industrial plasma technologies PHYS-632 The course provides an overview of the technologies that are essential for fusion developments and for industrial plasmaapplications, highlighting the synergies between the two fields. The aim is to provide a combined theoretical andexperimental background to the various topics.
Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Jean-Michel SalleseExpertise
- Modeling of field effect transistors (Multigate FETs, Junctionless FET, HEMT, Field Effect-based Biosensors).- Modeling substrate parasitic currents in integrated circuits.- Simulation of radiation induced soft errors in integrated circuits- High energy particle solid-state sensors.
Mission
The mission of the Electron Device Modeling and Technology group is to develop analytical and numerical models (physics based) of emerging semiconductor devices, with particular emphasis on field effect trans
Farhad Rachidi-HaeriFarhad Rachidi (IEEE Fellow, EMP Fellow, Electromagnetics Academy Fellow) was born in Geneva in 1962. He received the M.S. degree in electrical engineering and the Ph.D. degree from the Swiss Federal Institute of Technology, Lausanne, in 1986 and 1991 respectively.
He worked at the Power Systems Laboratory of the same institute until 1996 and had several short stays at the University of Florida and the NASA Kennedy Space Center. In 1997, he joined the Lightning Research Laboratory of the University of Toronto in Canada and from April 1998 until September 1999, he was with Montena EMC in Switzerland. He is currently a titular professor and the head of the EMC Laboratory at the Swiss Federal Institute of Technology, Lausanne, Switzerland.
His research interests concern electromagnetic compatibility, lightning electromagnetics and electromagnetic field interactions with transmission lines.
Dr. Rachidi is currently a member of the Advisory Board of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY and the President of the Swiss National Committee of the International Union of Radio Science.
He has received numerous awards including the 2005 IEEE EMC Technical Achievement Award, the 2005 CIGRE Technical Committee Award, the 2006 Blondel Medal from the French Association of Electrical Engineering, Electronics, Information Technology and Communication (SEE), the 2016 Berger Award from the International Conference on Lightning Protection, the 2016 Best Paper Award of the IEEE Transactions on EMC, and the 2017 Motohisa Kanda Award for the most cited paper of the IEEE Transactions on EMC (2012-2016).
In 2014, he was conferred the title of Honorary Professor of the Xi’an Jiaotong University in China.
He served as the Vice-Chair of the European COST Action on the Physics of Lightning Flash and its Effects from 2005 to 2009, the Chairman of the 2008 European Electromagnetics International Symposium, the President of the International Conference on Lightning Protection from 2008 to 2014, the Editor-in-Chief of the Open Atmospheric Science Journal (2010-2012) and the Editor-in-Chief of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY from 2013 to 2015. He is a Fellow of the IEEE and of the SUMMA Foundation, and a member of the Swiss Academy of Sciences.
He is the author or coauthor of over 200 scientific papers published in peer-reviewed journals and over 400 papers presented at international conferences.
Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Laurie PorteTeaching & PhD PhD Students James Winston Irawati Tumbokon, Oliver Morais Moura Past EPFL PhD Students as codirector Matteo Fontana, Pedro Andres Molina Cabrera, Arsène Tema Biwole Courses Atomic and radiative processes in plasmas PHYS-762 The course covers atomic structure, collisional-radiative (CR) processes, and spectroscopic techniques. Students learn to critically apply CR models, evaluate spectroscopic tools, and interpret experimental data obtained in different plasmas.
Christian SchlatterExpertise
plasma physicsnuclear fusionparticle diagnosticsweb technologiesserver administration
Mission
Manage projects in relation to the ITER fusion reactor (contracts with ITER organization and Fusion 4 Energy).Project Office for CRPP and the fusion consortia ECHUL, EGYC and ITERMAG.Development of a quality management system for the CRPP.
Web ressources full publication listMy lab web pageMy private web server Education degree in electronics | 1996 – 1996 LWB Bern Master in Phy
Alexander KarpushovExpertise
plasma physicsnuclear fusionparticle diagnosticsNB heating
Web CRPP MainCRPP OLDCRPP wikiMy wiki
Teaching & PhD Past EPFL PhD Students as codirector Claudio Marini, Jesús Poley Sanjuán
Olivier MartinOlivier J.F. Martin received the M.Sc. and Ph.D. degrees in physics in 1989 and 1994, respectively, from the Swiss Federal Institute of Technology, Lausanne (EPFL), Switzerland. In 1989, he joined IBM Zurich Research Laboratory, where he investigated thermal and optical properties of semiconductor laser diodes. Between 1994 and 1997 he was a research staff member at the Swiss Federal Institute of Technology, Zurich (ETHZ). In 1997 he received a Lecturer fellowship from the Swiss National Science Foundation (SNSF). During the period 1996-1999, he spent a year and a half in the U.S.A., as invited scientist at the University of California in San Diego (UCSD). In 2001 he received a Professorship grant from the SNSF and became Professor of Nano-Optics at the ETHZ. In 2003, he was appointed Professor of Nanophotonics and Optical Signal Processing at the Swiss Federal Institute of Technology, Lausanne (EPFL), where he is currently head of the Nanophotonics and Metrology Laboratory and Director of the Microengineering Section.
Demetri PsaltisResearch group
Teaching & PhD PhD Students Victoria Fay, Colin Nikhil Christian Past EPFL PhD Students Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç Past EPFL PhD
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
