Jan-Anders Edvin Maansson

Background: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France) Activities: Since January 2018: Associate Dean of Engineering, in charge of Education June 2012-Dec.2017: Head of the Materials Science and Engineering Section Since April 2017: Associate Professor at EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009: Researcher at EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Author of about 300 publications of which 140 in peer-reviewed journals

EDUCATION 1992 Dr. sc. techn. (PhD) Swiss Federal Institute of Technology, Zurich (ETH) 1983 Dipl. Bauing. ETH (MS civil engineering) Swiss Federal Institute of Technology, Zurich (ETH) EMPLOYMENT 2007-present, Full Professor of Structural Engineering (100%) Swiss Federal Institute of Technology, Lausanne (EPFL) Civil Engineering Institute 1998-2007, Associate Professor of Structural Engineering (80/100%) Swiss Federal Institute of Technology, Lausanne (EPFL) Structural Engineering Institute Foundation of CCLab in 2000 1996-1998, Assistant Professor of Structural Engineering (50%) Swiss Federal Institute of Technology, Zurich (ETH) Department of Architecture 1992-2004, Senior Project Engineer and Joint Owner Engineering offices in Zug and Zurich 1990-1992, Research Scientist Swiss Federal Institute of Technology, Zurich (ETH) Structural Engineering Institute 1986-1990, Project Engineer Architecture and engineering office Calatrava, Zurich 1983-1986, Teaching and Research Assistant Swiss Federal Institute of Technology, Zurich (ETH) Structural Engineering Institute

Aurelio Muttoni is full Professor and Head of the Structural Concrete Laboratory at the Ecole Polytechnique Fédérale de Lausanne (Switzerland). He received his diploma and PhD in civil engineering from the Swiss Federal Institute of Technology, Zurich, Switzerland, in 1982 and 1989, respectively. His current teaching activities focus on the conceptual design of structures, theory and dimensioning of concrete structures as well as bridge design. His research group is active in the following domains: behaviour and design methods for structural concrete, conceptual design of innovative structures, shear in structural concrete, punching shear of slabs, nonlinear structural analysis including its reliability, bond between steel and concrete, aggregate interlocking, fatigue and influence of sustained loading on the concrete strength, mechanical behaviour and design concepts for ultra-high performance concrete, textile concrete and recycled concrete. Aurelio Muttoni was the recipient of the Chester Paul Siess Award for Excellence in Structural Research in 2010 and the co-recipient of the Wason Medal for Most Meritorious Paper in 2014 of the American Concrete Institute. He is a member of the Presidium of fib (International Federation for Structural Concrete), several fib commissions and task groups and has been Project Team Leader for the second generation of EN 1992-1-1 (Eurocode for structural concrete). Aurelio Muttoni is also cofounder and partner of the Muttoni & Fernández consulting office (www.mfic.ch). This office is active in the conceptual design, analysis and dimensioning of load-bearing structure in architecture and civil engineering constructions as well as consulting activities in the field of structural engineering.

ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989- Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-) Privat Docent (1998) Laboratoire de Technologie des Composites et Polymères (LTC) (2000-) Laboratoire de Polymères (LP) (1998-2000) UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996 Visiting Scientist, Department of Materials Science and Engineering (DMSE) UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989 Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986 PhD, "Flux Pinning in Type-II Superconductors" UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982 BA/MA Honours Degree in Natural Sciences Awards Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989 RECENT PUBLICATIONS Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, “Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications”, Thin solid films, 516, 1913 (2008). Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, “Mechanical integrity of dye-sensitized photovoltaic fibers”, Renewable energy, 33, 314 (2008).

115. Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, “Hybrid glass fiber-reinforced thermoplastic nanocomposites”, J. Thermoplast. Comp. Mater., 21, 103 (2008).

Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, “Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis”, Macromolecules 41(19), 7079 (2008). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites”, Solid State Phenomena Vol. 151, 30 (2009). Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, “Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites”, Solid State Phenomena Vol. 151, 60 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Highly filled polystyrene–laponite nanocomposites prepared by emulsion polymerization”, European Polm. J. 45, 621 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization”, Engineering Fracture Mechanics 76, 2846 (2009) Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. “Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study”, Journal of Physical Chemistry C 113, 12293 (2009). Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., “Water adsorption on a sodium smectite clay surface: an ab initio study”, Journal of Physical Chemistry C 113, 15218 (2009). Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., “Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications”, J. Appl. Phys. 106, 054112 (2009) Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., “Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay”, Journal of Thermal Analysis and Calorimetry 98, 833 (2009) Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., “Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results” Macromol. React. Eng. 2010, 4, 432 (2010). Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., “Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites”, J. Comp. Mater. 44, 1975 (2010). Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., “Solidification behavior of PLLA/nHA nanocomposites”, Comp. Sci. & Tech. 70, 1813 (2010). Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., “Small Strain Mechanical Properties of Latex-Based Nanocomposite Films”, Macromol. Symp. 294, 1 (2010). Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., “Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite”, J Mater Sci 46, 2112 (2011).

Roland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute. After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France. In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel. In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF. In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth. In 2013, he became Research Director at CNRS. In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.

Nava Setter completed MSc in Civil Engineering in the Technion (Israel) and PhD in Solid State Science in Penn. State University (USA) (1980). After post-doctoral work at the Universities of Oxford (UK) and Geneva (Switzerland), she joined an R&D institute in Haifa (Israel) where she became the head of the Electronic Ceramics Lab (1988). She began her affiliation with EPFL in 1989 as the Director of the Ceramics Laboratory, becoming Full Professor of Materials Science and Engineering in 1992. She had been Head of the Materials Department in the past and more recently has served as the Director of the Doctoral School for Materials. Research at the Ceramics Laboratory, which Nava Setter directs, concerns the science and technology of functional ceramics focusing on piezoelectric and related materials: ferroelectrics, dielectrics, pyroelectrics and also ferromagnetics. The work includes fundamental and applied research and covers the various scales from the atoms to the final devices. Emphasis is given to micro- and nano-fabrication technology with ceramics and coupled theoretical and experimental studies of the functioning of ferroelectrics. Her own research interests include ferroelectrics and piezoelectrics: in particular the effects of interfaces, finite-size and domain-wall phenomena, as well as structure-property relations and the pursuit of new applications. The leading thread in her work over the years has been the demonstration of how basic or fundamental concepts in materials - particularly ferroelectrics - can be utilized in a new way and/or in new types of devices. She has published over 450 scientific and technical papers. Nava Setter is a Fellow of the Swiss Academy of Technical Sciences, the Institute of Electrical and Electronic Engineers (IEEE), and the World Academy of Ceramics. Among the awards she received are the Swiss-Korea Research Award, the ISIF outstanding achievement award, and the Ferroelectrics-IEEE recognition award. In 2010 her research was recognized by the European Union by the award of an ERC Advanced Investigator Grant. Recently she received the IEEE-UFFC Achievement Award (2011),the W.R. Buessem Award(2011), the Robert S. Sosman Award Lecture (American Ceramics Society) (2013), and the American Vacuum Society Recognition for Excellence in Leadership (2013).