Publications by Stefano Alberti

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In current tokamaks and, in particular, in future larger devices such as ITER, the control of neo-classical tearing modes (NTM) is essential for achieving high performance in terms of the beta limit. A commonly used scheme for NTM stabilization consists in driving a helical current at the resonance surface of interest with electron-cyclotron-current-drive. Depending on the ratio between the magnetic island size and the RF beam width, complete stabilization of the NTM will only be achieved with deep RF power

An over-moded evacuated waveguide line was chosen for use in the transmission system for the proposed JET enhanced performance project (JET-EP) electron cyclotron resonance heating (ECRH) system. A comparison between the quasi-optical, atmospheric waveguide and evacuated waveguide systems was performed for the project with a strong emphasis placed on the technical and financial aspects. The evacuated waveguide line was chosen as the optimal system in light of the above criteria. The system includes six line

The EC-system of the TCV tokamak is progressively being upgraded with the addition of two MW-class dual-frequency gyrotrons (84 and 126 GHz/2s/1MW). In order to connect the two gyrotrons to the existing low field side and top launchers, new waveguide routi ...

For a few years the multi-physics modelling of the resonance cavity (resonator) of MW-class continuous-wave gyrotrons, to be employed for electron cyclotron heating and current drive in magnetic confinement fusion machines, has gained increasing interest. ...

Confinement in TCV electron cyclotron heated discharges was studied as a function of plasma shape, i.e. as a function of elongation, 1.1 < kappa < 2.15, and triangularity, -0.65 less than or equal to delta less than or equal to 0.55. The electron energy confinement time was found to increase with elongation, owing in part to the increase of plasma current with elongation. The beneficial effect of negative triangularities was most effective at low power and tended to decrease at the higher powers used. The l

Scientific and technical activities on JET focus on the issues likely to affect the ITER design and operation. Our understanding of the ITER reference mode of operation, the ELMy H-mode, has progressed significantly. The extrapolation of ELM size to ITER has been re-evaluated. Neoclassical tearing modes have been shown to be meta-stable in JET, and their beta limits can be raised by destabilization (modification) of sawteeth by ion cyclotron radio frequency heating (ICRH). Alpha simulation experiments with

Radially localized electron cyclotron heating (ECH) at the 2nd harmonic (X2) is used to tailor the current profile through the modification of the temperature, and hence conductivity, profiles. The optimal conditions for current profile broadening are inve ...

The TCV tokamak (R = 0.88 in, a < 0.25 in, BT < 1.54 T) is equipped with six 0.5 MW gyrotron sources operating at 82.7 GHz for second harmonic X mode ECH. By distributing the ECCD current sources over the discharge cross section, fully driven stationary plasmas with I-p = 210 kA, n(e0) = 2 x 10(19) m(-3), T-e0 approximate to 4 keV, were obtained for the full discharge duration of 2 s. Highly peaked electron temperature profiles with T-e0 up to 12 keV were obtained in central counter-current drive scenarios

A research activity in the Institute for Plasma Science and Technology of National Research Council (ISTP-CNR, Italy, former IFP-CNR) and in L.T. Calcoli (LTC, Italy) is aimed at the design and construction of calorimetric loads for absorption and measurem ...

The electron cyclotron heating (ECH) system in TCV has recently been upgraded to a total of 4.5 MW of installed power. In order to extend the density range of ECH-heated plasmas up to electron densities of 1.2 x 10(20) m(-3), three 0.5 MW gyrotrons at a frequency of 118 GHz have been added to the existing 3 MW second harmonic system operating at a frequency of 82.7 GHz. The launcher consists of a mirror placed at the top of the vessel that collects the power of the three microwave sources and can be steered

The operating space of the TCV tokamak has been extended to higher elongation, kappa = 2.8, and higher normalized current, I-N = I-p/aB = 3.6MA/mT, than were previously attainable. This has been achieved by optimizing the parameters of the vertical position control system and by optimizing the plasma shape. Experimental current and beta limits were found to be consistent with ideal MHD stability calculations, using measured plasma shapes and profiles. The sawtooth period was measured as a function of elonga

The TCV tokamak (B-T < 1.5 T, R approximate to 0.88 m, a < 0.25 m) has produced a wide variety of plasma configurations, both diverted and limited, with elongations kappa(a), ranging from 0.9 to 2.58, triangularities delta(a) from -0.7 to 1 as well as discharges with nearly rectangular cross sections. Plasma currents of 1 MA have been obtained in elongated discharges (kappa(a) approximate to 2.3). Ohmic discharges with delta(a) < 0 have smaller sawteeth and higher levels of MHD mode activity than plasmas wi

In the frame of development of the ITER electron cyclotron wave (ECW) system, a two MW CW coaxial cavity gyrotron will be developed during the Sixth Framework Program (2003-2006). Such development relies on the availability of a test stand capable of providing the electrical energy and cooling capacity. This test stand will possibly be used, in a later stage, for the component test of the ITER ECW system. This paper will first present the main parameters of this new coaxial gyrotron. Then we describe the te

An electron cyclotron resonance heating (ECRH) system has been designed for JET in the framework of the JET enhanced performance project (JET-EP) under the European fusion development agreement. Due to financial constraints it has been decided not to implement this project. Nevertheless, the design work conducted from April 2000 to January 2002 shows a number of features that can be relevant in preparation of future ECRH systems, e.g. for ITER. The ECRH system was foreseen to comprise six gyrotrons, 1 MW ea

Measurements of electron cyclotron emission (ECE) from the high field side of the TCV tokamak have been made on plasmas heated by second and third harmonic X-mode electron cyclotron heating (ECH) and electron cyclotron current drive (ECCD). Suprathermal ECE, up to a factor of six in excess of thermal emission, is detected in the presence of second harmonic X-mode (X2) ECCD and of third harmonic X-mode (X3) ECH. The measured ECE spectra are modelled using a bi-Maxwellian describing the bulk and the suprather

In the moderate magneticfield of TCV (1.5T), the recently installed X3 system (3 gyrotrons @118 GHz, 0.45 MW/each, 2s) broadens the operational space with the possibility of heating plasmas at high density, well above the cutoff density of the X2 system (X ...

The engineering design and R&D of auxiliary heating systems and their sub-systems are a key activities in the frame of the present conceptual design phase for a first of a kind DEMOnstration Fusion Power Plant in order to develop a system capable of achiev ...

A dual-frequency gyrotron has been developed within the context of the recent Tokamak à Configuration Variable (TCV) upgrade. The gyrotron is designed to generate a 1 MW, 2 seconds RF wave at 84 or 126 GHz. Before integrating the gyrotrons in the TCV tokam ...

Electron cyclotron resonance heating (ECRH) has proven to be one of the most attractive heating schemes for stellarators. Therefore, ECRH was chosen to be the main heating method for the Wendelstein 7-X stellarator (W7-X) now under construction at IPP Grei ...

Hyperpolarization in diamond via dynamic nuclear polarization (DNP) has attracted a lot of interest for various applications as diamond exhibits extremely long C-13 spin relaxation times and has endogenous polarizing agents in the form of crystalline defec ...

Stefano Alberti

Chat with Graph Search

Power modulation capabilities of the 140 GHz/1 MW gyrotron for the stellarator Wendelstein 7-X

An ITER relevant evacuated waveguide transmission system for the JET-EP ECRH project

Design and implementation of quasi-optical components for the upgrade of the TCV EC-system

A Validation Roadmap of Multi-Physics Simulators of the Resonator of MW-Class CW Gyrotrons for Fusion Applications

Energy confinement and MHD activity in shaped TCV plasmas with localized electron cyclotron heating

Overview of JET results

Current profile tailoring using localized electron cyclotron heating in highly elongated TCV plasmas

Overview of TCV results

Operations with Spherical Calorimetric Loads in Different Configurations at Gyrotron Test Stands at EPFL and QST

Preliminary results of top launch third harmonic X-mode electron cyclotron heating in the TCV tokamak

Stability and energy confinement of highly elongated plasmas in TCV

Effect of plasma shape on confinement and MHD behaviour in TCV

Design study of a test stand for ITER gyrotron

The design of an ECRH system for JET-EP

High field side measurements of non-thermal electron cyclotron emission on TCV plasmas with ECH and ECCD

Third-harmonic X-mode, real-time controlled top-launch ECW experiments on TCV tokamak

EU DEMO EC system preliminary conceptual design

Experimental characterization of the TCV dual-frequency gyrotron and validation of numerical codes including the effect of After Cavity Interaction

140 GHz high-power gyrotron development for the stellarator W7-X

High-Field C-13 Dynamic Nuclear Polarization in Nanodiamond