Emmanuel DenariéEmmanuel Denarié is a civil engineer, with a PhD in Materials Science. He worked for 3 years in a civil engineering company where he was in charge of the design of structures and the maintenance of bridges. He has 30 years’ experience on research and applications in the field of building materials, advanced concretes, and rehabilitation of reinforced concrete structures. He is since 2000 senior scientist and lecturer in the Laboratory for Maintenance and Safety of structures, at Ecole Polytechnique Fédérale de Lausanne (EPFL), in charge of research and development activities on the application of concretes and advanced cementitious materials to the improvement of existing and new structures. In 2013, under the lead of Emmanuel Denarié, in cooperation with CEREMA, Subdivision des Phares et Balises from Lorient, and Lafarge, a turret at sea (Le Cabon, Brittany, France) was reinforced by a cast on site 60 mm thick UHPFRC shell. The strain hardening mix was developed jointly with Lafarge. This successful application in extreme conditions of access and restraint of the substrate (thin ring geometry) opened the way to large-scale industrial applications of UHPFRC for the reinforcement of existing structures.
Nico de RooijNico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Cyril VeillonExpertise
As a communication tool for architecture, urbanism, construction and the environment, Archizoom catalyses the broadening of education and research. Our mission is to engage in a dialogue between students, academia, the profession and the public at large.
Jan-Anders Edvin MaanssonExpertise
Composite polymer tailoringSurface and interface studyProcess kinetics and rheologyMechanics and internal stresses
Mission
The overall research objective at the Laboratory of Composite and Polymer Technology (LTC) is to create the scientific base on which the next generation of materials and processes for the fast-growing polymer and composite field will be established. This implies novel approaches for tailoring materials systems and process cycles. To this end, the laboratory is organised around
André-Gilles DumontAndré-Gilles Dumont est né en 1951 à la Brévine (NE). Il obtient en 1976 le diplôme d'ingénieur civil de l'EPFL.
Jusqu'en 1979, il est collaborateur d'un bureau d'ingénieurs et dirige la construction de divers bâtiments. Il entre ensuite au Laboratoire des voies de circulation (LAVOC) où il va développer une méthodologie d'essais en vraie grandeur des superstructures routières. Cette activité sera poursuivie au niveau international au sein de deux groupes d'experts scientifiques de l'OCDE.
Parallèlement au développement du LAVOC et à l'exécution de nombreux mandats pour des tiers, il est l'auteur de plusieurs recherches dans le domaine des matériaux granulaires et des bitumineux modifiés par des polymères.
En Suisse, il assume dès 1985 la présidence de la commission Technologie des matériaux de l'Union des professionnels suisses de la route puis, dès 1990, celle de la commission de coordination Exécution et entretien.
Depuis 1991, il est professeur et dirige le LAVOC. Il enseigne aux étudiants du génie civil et du génie rural, d'une part le tracé des voies de circulation et, d'autre part la construction et l'entretien des superstructures routières. Il mène également des recherches dans le domaine des propriétés des matériaux hydrocarbonés et de la modélisation des chaussées, comme dans celui de l'utilisation de la CAO pour l'élaboration des projets routiers et la prise en compte des facteurs environnementaux.
Jérôme Henri KämpfExpertise
Modelling, simulation and optimisation, Urban Physics
Education PhD | On the Modelling and Optimisation of Urban Energy Fluxes 2009 Р2009 Ecole Polytechnique F̩d̩rale de Lausanne Directed by Prof. Dr Jean-Louis Scartezzini, LESO-PBMER Dr Darren Robinson, LESO-PB Master | Pedagogics 2005 Р2005 Haute Ecole P̩dagogique Lausanne Master | Computer Science 2003 Р2003 University of Lausanne Master | Physics
Christian RoeckerMission
Research:Thermal collectors building integration with thin films technology and selective paintsPhotovoltaic building integration, system analysis and developmentDaylighting, laboratory apparatus concept and design Airflow in buildings, laboratory apparatus concept and design Photovoltaics consulting for Solar Impulse and StratxxTeaching:Photovoltaics in European Master in Architecture and Sustainable Development
Professional experience 1983 – current Senior Scientist and project leader at the
Giulia MarinoGiulia Marino has a Master’s degree in architecture in History and theories of restoration of monuments from the University of Florence (MA, 2003) and a PhD in architecture from the École polytechnique fédérale de Lausanne (PhD, 2014; EPFL Doctorate Award 2016). She obtained also a Postgraduate Master in Preservation of modern and contemporary built heritage from the University of Geneva (DEA, 2006).
Professor at the Université Catholique de Louvain, LOCI Faculty (UCLouvain, Bruxelles, Belgium) and researcher at the Laboratory of Techniques and Preservation of Modern Architecture at the EPFL (Switzerland), Giulia Marino is also consultant architect in heritage preservation.
Her scientific interests are centred on history of strategies for the conservation of the modern and contemporary heritage, and on the history of construction techniques and twentieth-century building services. She has developed these two main strands of research in her work, as well as the monumental heritage of the interwar period (e.g. Le Corbusier’s studio-apartment at 24NC, commissioned by the Foundation Le Corbusier, 2014, with a grant from the Getty Foundation) and in the extensive corpus of architectural production 1945-75 (e.g. Stratégies pour la cité du Lignon, 2009-2012; Europa Nostra Award 2013, SIA-Umsicht Award 2013).
She has given lectures in Europe (Paris, Lisbon, Brussels, Milan, Luxembourg, etc.) and internationally (Chandigarh, Mexico City, Tokyo, Montreal, etc.). She has also presented at numerous international conferences and published papers and articles (Werk, Arquitectura Viva, AMC, etc.) as well as a monograph on the CAF building in Paris (Picard, 2009, 270 p.), and a book on the restoration of the Cité du Lignon housing complex, as well as being responsible for its scientific conception and coordination (Infolio, 2012, 160 p.). She recently coedited the volume Building Environment and Interiors Comfort in 20th-Century Architecture: Understanding Issues and Developing Conservation Strategies (PPUR, 2016) and Les multiples vies de l’appartement-atelier. Le Corbusier (PPUR, 2017). After the monograph on the Buvette d’Evian by Jean Prouvé (Infolio, 2018) and the volume Avanchet-Parc, “cité de conception nouvelle et originale (Infolio, 2020), she is working on the publication of her PhD at the Éditions Métispresses and the proceedings of International Study Day “Restoring Jean Prouvé” (PPUR, 2021).
She is Vice President of Docomomo Switzerland since 2015 and member of the board of Docomomo Belgium since 2020.
She is also a member of ICOMOS Schweiz, the Swiss Heritage Society, the Swiss Society of Engineers and Architects-SIA, Associazione italiana per la storia dell’ingegneria, Association francophone d’histoire de la construction and the Construction History Society.
Luc GirardinExpertise
Industrial and urban energy systemsTerritorial energy planningProcess and energy integrationGeographical information system, data management and analysis
Professionals experiences Scientist 2016–2025 EPFL-IPESE & HES-SO ValaisFounder 2025–2025 EcoCime SàrlCo-founder 2018–2025 ExerGo SAProject Engineer 2012–2015 BG Ingénieurs Conseils SA (WSP)PHd student & Research assistant 2006–2012 LENI-EPFLResearch assistant 2005–2006 LENI-EPFL,ABB
Andreas Schueler
-
Studies of Physics at the University of Freiburg, Germany
-
Master of Science (Physics) from the University of Michigan, Ann Arbor, USA
-
PhD degree from the University of Basel, Switzerland
