Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Benjamin DwirAcademic title: Dr.
Birth date: 24.10.1959
Nationality: Swiss
At EPFL since: 1988
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Thomas La GrangeExpertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Microscopy, Electron Energy Loss Spectroscopy, Energy Dispersive Spectroscopy, Materials Science, High-speed deformation, Dislocation Dynamics, Skyrmionics, Martensitic Phase Transformation Theory, Solidification
Expertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Micro
Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Michaël UnserExpertise
Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution
Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
