François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Aude BillardExpertise
RoboticsMachine LearningArtificial IntelligenceHuman-Robot InteractionMechatronicsDynamical Systems ControlComputational Neuroscience
Aude Billard is full professor and head of the LASA laboratory at the School of Engineering at the Swiss Institute of Technology Lausanne (EPFL), and the Director of the Swiss Innovation Booster on Robotics. Dr. Billard acts as the President of the IEEE Robotics and Automation Society (RAS), after serving in several roles in the administrative and executive committe
Anja SkrivervikAnja Skrivervik obtained her electrical engineering degree from Ecole Polytechnique Fédérale de Lausanne in 1986, and her PhD from the same institution in 1992, for which she received the Latsis award. After a stay at the University of Rennes as an invited Research Fellow and two years in the industry, she returned part time to EPFL as an Assistant Professor in 1996, and is now a Professeur Titulaire at this institution, where she is the head of the Microwave and Antenna Group. Her research activities include electrically small antennas, antennas in biological media, periodic structures, reflect- and tranmitarrays, and numerical techniques for electromagnetics. She is author or co-author of more than 200 peer reviewed scientific publications. Her teaching activities include courses on microwaves and antennas, and she has course at Bachelor, Master and PhD levels. She was director of the EE section form 1996-2000, and is currently the director of the EE doctoral school at EPFL.
She is very active in European collaboration and European projects. She was the chairperson of the Swiss URSI until 2012, is a Board member of the European School on Antennas and is frequently requested to review research programs and centers in Europe. She is a member of the board of directors of the European Association on Antennas and Propagation (EurAAP) since 2017.
Jacques JacotExpertise
AssemblyMicro-assemblyMicro-vision
Mission
Formé de 6 laboratoires et fort de plus de 170 collaboratrices et collaborateurs, l''Institut de Production et Robotique (IPR) a pour missions la formation et la recherche en sciences et technologies pour la conception et la production de biens en préservant ressources naturelles et environnement. Les laboratoires de notre institut se caractérisent par d''intenses collaborations avec les entreprises industrielles. nnovation * Recherche de concepts no
Marilyne AndersenMarilyne Andersen is a Full Professor of Sustainable Construction Technologies and heads the Laboratory of Integrated Performance in Design (LIPID) that she launched in the Fall of 2010. She was Dean of the School of Architecture, Civil and Environmental Engineering (ENAC) at EPFL from 2013 to 2018 and is the Academic Director of the Smart Living Lab in Fribourg. She also co-leads the Student Kreativity and Innovation Laboratory (SKIL) at ENAC. Before joining EPFL as a faculty, she was an Assistant Professor then Associate Professor tenure-track in the Building Technology Group of the MIT School of Architecture and Planning and the Head of the MIT Daylighting Lab that she founded in 2004. She has also been Invited Professor at the Singapore University of Technology and Design in 2019. Marilyne Andersen owns a Master of Science in Physics and specialized in daylighting through her PhD in Building Physics at EPFL in the Solar Energy and Building Physics Laboratory (LESO) and as a Visiting Scholar in the Building Technologies Department of the Lawrence Berkeley National Laboratory in California. Her research lies at the interface between science, engineering and architectural design with a dedicated emphasis on the impact of daylight on building occupants. Focused on questions of comfort, perception and health and their implications on energy considerations, these research efforts aim towards a deeper integration of the design process with daylighting performance and indoor comfort, by reaching out to various fields of science, from chronobiology and neuroscience to psychophysics and computer graphics. She is leveraging this research in practice through OCULIGHT dynamics, a startup company she co-founded, which offers specialized consulting services on daylight performance and its psycho-physiological effects on building occupants. She is the author of more than 200 papers published in peer-reviewed journals and international conferences and the recipient of several grants and awards including: the Daylight Award for Research (2016), eleven publication awards and distinctions (2009, 2011, 2012, 2015, 2018, 2019) including the Taylor Technical Talent Award 2009 granted by the Illuminating Engineering Society, the 3M Non-Tenured Faculty Grant (2009), the Mitsui Career Development Professorship at MIT (2008) and the EPFL prize of the Chorafas Foundation awarded to her PhD thesis in Sustainability (2005). Her research or teaching has been supported by professional, institutional and industrial organizations such as: the Swiss and the U.S. National Science Foundations, the Velux Foundation, the European Horizon 2020 program, the Boston Society of Architects, the MIT Energy Initiative and InnoSuisse. She was the leader and faculty advisor of the Swiss Team and its NeighborHub project, who won the U.S. Solar Decathlon 2017 competition with 8 podiums out of 10 contests. She is a member of the Board of the LafargeHolcim Foundation for Sustainable Construction and Head of its Academic Committee. She is also a member of the Editorial Board of the journal Building and Environment by Elsevier, and of the journals LEUKOS (of the Illuminating Engineering Society) and Buildings and Cities, by Taylor and Francis. She is expert to the Innovation Council of InnoSuisse and Founding member as well as Board member of the Foundation Culture du Bâti (CUB), and is also founding member of the Daylight Academy and an active member of several committees of the Illuminating Engineering Society (IES) and International Commission on Illumination (CIE).
Boi FaltingsProfessor Faltings joined EPFL in 1987 as professor of Artificial Intelligence. He holds a PhD degree from the University of Illinois at Urbana-Champaign, and a diploma from the ETHZ. His research has spanned different areas of intelligent systems linked to model-based reasoning. In particular, he has contributed to qualitative spatial reasoning, case-based reasoning (especially for design problems), constraint satisfaction for design and logistics problems, multi-agent systems, and intelligent user interfaces. His current work is oriented towards multi-agent systems and social computing, using concepts of game theory, constraint optimization and machine learning. In 1999, Professor Faltings co-founded Iconomic Systems, a company that developed a new agent-based paradigm for travel e-commerce. He has since co-founded 5 other startup companies and advised several others. Prof. Faltings has published more than 150 refereed papers on his work, and participates regularly in program committees of all major conferences in the field. He has served as associate editor of of the major journals, including the Journal of Artificial Intelligence Research (JAIR) and the Artificial Intelligence Journal. From 1996 to 1998, he served as head of the computer science department.
Rachid GuerraouiRachid Guerraoui has been affiliated with Ecole des Mines of Paris, the Commissariat à l'Energie Atomique of Saclay, Hewlett Packard Laboratories and the Massachusetts Institute of Technology. He has worked in a variety of aspects of distributed computing, including distributed algorithms and distributed programming languages. He is most well known for his work on (e-)Transactions, epidemic information dissemination and indulgent algorithms.
He co-authored a book on Transactional Systems (Hermes) and a book on reliable distributed programming (Springer). He was appointed program chair of ECOOP 1999, ACM Middleware 2001, IEEE SRDS 2002, DISC 2004 and ACM PODC 2010.
His publications are available at http://lpdwww.epfl.ch/rachid/papers/generalPublis.html Nico de RooijNico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Christian DepeursingeChristian Depeursinge is the leader of the Microvision and Micro-Diagnostics (MVD) group at the Advanced Photonics Laboratory of the Institute of Microengineering at EPFL (Ecole Polytechnique Fédérale de Lausanne), Switzerland (http://apl.epfl.ch/muvision). His research and expertise in biomedical engineering and optics is internationally acknowledged. His current research topics include coherent and incoherent Imaging applied to diagnostics in biology, His research group pioneered in the development of DHM technology. He worked on several projects developed in cooperation with European and international partners. He is author and co-author of over 100 papers published in peer reviewed journals, several book chapters and more than 30 patents. He has given more than 20 invited lectures and plenaries in the last five years. He developed many projects in cooperation with national and international industries. He is co-founder of a start-up company (Lyncée Tec SA: www.Lynceetec.com). He is currently teaching at EPFL and occasionally in foreign universities and institutes. Vincent KaufmannVincent Kaufmann is associate professor of urban sociology and mobility at Ecole Polytechnique Fédérale de Lausanne (EPFL). Since 2011, he is also scientific director of the Mobile Lives Forum in Paris. After a master degree in sociology (Universtiy of Geneva) he did his Ph.D. at EPFL on rationalities underlying transport modal practices. Vincent Kaufmann has been invited lecturer at Lancaster University (2000-2001), Ecole des Ponts et Chaussées, Paris (2001-2002), Laval University, Québec (2008) Nimegen University (2010), Université de Toulouse Le Mirail (2011), Université Catholique de Louvain (2004-2018) and Tongji University in Shanghai (2018). There fields of research are: motility, mobility and urban life styles, links between social and spatial mobility, public policies of land planning and transportation. He recently published “Mobilité et libre circulation en Europe” (with Ander Audikana) Economica (2017).
Dimitrios KyritsisResearch
? Computer Aided Process Planning for Manufacture, Assembly, Disassembly,
? Petri- net modeling with applications in Manufacturing,
? Closed-loop Product Lifecycle Management (PLM) using Product Embedded Information Devices (PEID),
? Engineering Asset Management,
? Ontology-Based Engineering.
Membership and Services in Professional Organizations
? Chair of IFIP-WG5.7 - Advance Production Management Systems, member since 2005
? Member of ASME since 1993
? Vice President/Secretary of ASME International Swiss Chapter, 1995-2006
? Member of the Board of MANUFUTURE-CH
? Founding Member of the new IFAC TC5.1 WG IFAC WG Advanced Maintenance Engineering, Services and Technology
? Founding member of the Hellenic Maintenance Society since 2007
? Founding member of the International Society of Engineering Asset Management (ISEAM) since 2007
Services in EPFL Committees
? Member of the Informatics Committee of DGM: 1999-2001
? Member of the Doctoral Program Committee of the Doctoral Program: Manufacturing Systems and Robotics, since 2002
? Member of the CCE (Conference du Coprs des Enseignants) of EPFL since 2007
Services in other Universities
? Member of the Administration Board of INP GI, the Industrial Engineering School of INP Grenoble, elected as Qualified External Personality, 2008-2013 and 2013-2016
? Invited professor at the University of Technology of Compiègne, France
? Invited professor at the University of Technology of Belfort-Montbéliard, France
? Invited professor at the Paris-Tech, ENSAM, France
? Guest professor at the University of Cincinnati, USA
Services at the European Commission
? Member of the Advisory Group LEIT-NMBP
Services in International Research activities
? Referee of the international scientific journals CAD, Computers In Industry, Production Planning and Control and others as well as ASME and IEEE conferences, 1994 - today.
? Guest Editor of the special issue on CAPP of the international scientific journal Advances in Engineering Software, 25, 1996.
? Member of the Editorial Board of the international scientific journal Advances in Engineering Software, 1996-today.
? Project Technical Advisor of two BRITE/EURAM-CRAFT projects in the field of CAD/CAM, 1995-1997.
? Evaluator of BRITE/EURAM projects (November 1997 evaluation).
? Invited expert at the IMS Workshop, EC, February 2002.
? Evaluator of FP6-NMP-IP projects (April 2003 evaluation).
? Invited expert at MANUFUTURE 2003.
? Evaluator of NEST projects (2005)
? Invited expert at IMS-NoE FP7 Roadmap Workshops on manufacturing organised by the European Commission.
? Invited expert at MANUFUTURE-CH, 2005-today.
? Invited expert at MIT RFID Academic Convocation, 2006.
? Founding member of the International Working Group on PLM, 2007- .
? Reviewer of EPSRC program proposals, UK, 2008.
? Reviewer of the National UK Research Prorgam IMRC, 2008.
? Reviewer of the National Greek Research Program Competitiveness-Enterpeneurship, 2009.
Organisation of Conferences
? Organiser and chairman of two technical sessions on CAPP, in the 1994 ASME International Computers in Engineering Conference, Minneapolis, USA, 11- 14 September 1994.
? Member of the Organizing Committee of the International Symposium for Electromachining-ISEM-XI, held in Lausanne, Switzerland, April 17-21, 1995. Also co-editor of the Conference Proceedings.
? Program co-chairman and member of the Organizing Committee of the First International Workshop on Intelligent Manufacturing Systems [IMS-EUROPE 1998], held in Lausanne, Switzerland, April 15-17, 1998. Also co-editor of the Conference Proceedings.
? Member of the National Organizing Committee of the 16th IMACS WORLD CONGRESS 2000 on Scientific Computation, Applied Mathematics and Simulation, Lausanne, Switzerland, August 21-25, 2000.
? General Secretary of the International Symposium TMCE 2004, April 13-17, 2004, Lausanne, Switzerland.
? Member of the International Advisory Committee of the international conference IMS-Forum 2004, Como, Italy, May 2004.
? Organiser and chairman of two sessions (SIG5), IMS-Forum 2004, Como, Italy, May 2004.
? Organiser and chairman of a session at INCOM 2006, May 2006, Saint-Etienne, France.
? Member of the International Program Committee of the international congress WCEAM 2006, July 2006, Brisbane, Australia.
? Member of the Program Committee of the international conference ASI 2006, September 2006, Kassel, Germany.
? Member of the Technical Programme Committee of the international conference APMS 2006 (IFIP-WG5.7), September 2006, Wroclaw, Poland.
? Member of the International Program Committee of the international congress WCEAM 2007, April 2007, Harrogate, UK.
? Member of the International Program Committee of the international conference EURASIP 2007.
? Member of the International Program Committee of the international conference PLM 2007, July 2007, Milan, Italy.
? Organiser and chairman of the session on Sustainable Manufacturing of the Internationla IMS workshop, November 2007, Zürich, Switzerland.
? General Chair of the 1st IMS MTP Workshop, April 2008, Bern, Switzerland.
? Member of the International Program Committee of the international conference EURASIP 2008.
? Member of the International Program Committee of the international conference PLM 2008, July 2008, Seoul, South Korea.
? General Chair of the 2nd IMS MTP Workshop, October 2008, Montreux, Switzerland.
? Member of the International Program Committee of the international congress WCEAM 2008, October 2008, Beijing, China.
? Program Chair & Coordinator of the IMS World Congress: Engineering a Sustainable Future, November 2009, Geneva, Switzerland.
? Congress Chair of the the international congress WCEAM 2009, 28-30 September 2009, Athens, Greece (www.wceam.com). 