Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Simulation of Quantum Devices

In course

EE-567: Semiconductor devices II

Students will learn about understanding the fundamentals and applications of emerging nanoscale devices, materials and concepts. Remark: at least 5 students should be enrolled for the course to be given ...

Description

This lecture covers the simulation of 2D and 1D Field-Effect Transistors using the Non-Equilibrium Green's Function method, focusing on the simulation of quantum devices with quantum structures and the comparison between Equilibrium and Non-Equilibrium approaches.

Instructors (2)

Mihai Adrian Ionescu

Adrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).

Andras Kis

2015− Associate professor, EPFL, STI, Institute of Electrical Engineering (IEL) and Materials Science and Engineering Institute (IMX) 2008−2015 Tenure-track assistant professor at EPFL, School of Engineering (STI), Institute of Electrical Engineering (IEL) 2004−2007 Postdoctoral researcher at the University of California, Berkeley, Physics Department in the group of Prof. Zettl 2000−2003 PhD student at EPFL, Faculty of basic sciences, Institute of physics of complex matter, group of Prof. Forró 1994−1999 MS, Physics, University of Zagreb, Croatia 1994 Baccalaureate, MIOC (Mathematical and Informational Educational Center) high school

Official source

Ontological neighbourhood

Physics

Condensed matter physics: Solid-state physics

Related concepts (32)

Field-effect transistor

The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor. FETs (JFETs or MOSFETs) are devices with three terminals: source, gate, and drain. FETs control the flow of current by the application of a voltage to the gate, which in turn alters the conductivity between the drain and source. FETs are also known as unipolar transistors since they involve single-carrier-type operation.

Transistor

A transistor is a semiconductor device used to amplify or switch electrical signals and power. It is one of the basic building blocks of modern electronics. It is composed of semiconductor material, usually with at least three terminals for connection to an electronic circuit. A voltage or current applied to one pair of the transistor's terminals controls the current through another pair of terminals. Because the controlled (output) power can be higher than the controlling (input) power, a transistor can amplify a signal.

MOSFET

The metal-oxide-semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET) is a type of field-effect transistor (FET), most commonly fabricated by the controlled oxidation of silicon. It has an insulated gate, the voltage of which determines the conductivity of the device. This ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals. A metal-insulator-semiconductor field-effect transistor (MISFET) is a term almost synonymous with MOSFET.

History of the transistor

A transistor is a semiconductor device with at least three terminals for connection to an electric circuit. In the common case, the third terminal controls the flow of current between the other two terminals. This can be used for amplification, as in the case of a radio receiver, or for rapid switching, as in the case of digital circuits. The transistor replaced the vacuum-tube triode, also called a (thermionic) valve, which was much larger in size and used significantly more power to operate.

Simulation

A simulation is the imitation of the operation of a real-world process or system over time. Simulations require the use of models; the model represents the key characteristics or behaviors of the selected system or process, whereas the simulation represents the evolution of the model over time. Often, computers are used to execute the simulation. Simulation is used in many contexts, such as simulation of technology for performance tuning or optimizing, safety engineering, testing, training, education, and video games.

Related lectures (31)

Simulation of 2D Field Effect Transistors

Covers the simulation of 2D Field Effect Transistors and the advantages of using Green's Function.

Review of BJT and MOS

Provides a detailed review of Bipolar Junction Transistor (BJT) and Metal-Oxide-Semiconductor (MOS) devices.

MOS Transistor Operation: Triode vs Saturation

Explains MOS transistor operation in triode and saturation regions, focusing on transconductance and layout.

Excitonic Devices: Modeling and Applications

Covers excitonic device modeling and exciton control using 2D materials.

Semiconductor Devices II: Contact Resistance Modeling