Lecture

Stirling Cycle: Practical Implementation

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

PHYS-106(a): General physics : thermodynamics

Le but du cours de Physique générale est de fournir les notions de base nécessaires à la compréhension des phénomènes physiques. L'objectif est atteint lorsqu'il est possible de prévoir quantitativement les conséquences de ces phénomènes avec des outils th ...

Description

This lecture covers the practical realization of the Stirling cycle, including different schemes such as isochoric heating, isothermal expansion, isochoric cooling, and isothermal compression. The slides illustrate the processes involved in each phase, highlighting the changes in pressure, temperature, and energy transfer. The essential concepts of the Carnot and Stirling cycles, efficiency calculations, and heat exchange relations are also discussed, emphasizing the need for two heat sources at different temperatures for continuous work production.

Instructors (2)

Romuald Houdré

Curriculum Vitae CV 2011 Appointed as Adjunct Professor 2006 Appointed as Maitre d'Enseignement et de Recherche 2004 Joins the "Laboratory of Quantum Electronics" led by Prof. B. Deveaud-Plédran 2001-2004 Appointed as "Adjoint Scientifique" at the Institute for Quantum Photonics and Electronics (previously Institute for Micro and Optoelectronics led by Prof. M. Ilegems) 1998 Habilitation, University Pierre et Marie Curie, Paris 6 (France) 1997 Invited researcher at NTT, Optoelectronics Department (Atsugi, Japan) 1988-2000 "Collaborateur scientifique" at the Institut for Micro and Optoelectronics with Prof. M.Ilegems at the Swiss Federal Institut of Technology in Lausanne (Switzerland). In charge of the Molecular Beam Epitaxy (1988-1996) and the research on optical microcavities (1996-2000) 1987-1988 Laboratoire de Physique de la Matière Condensée at Ecole Polytechnique (France). 1986-1987 Postdoctoral fellow at the University of Illinois at Urbana-Champaign (U.S.A.) with Prof. H.Morkoç in the molecular beam epitaxy group 1983-1985 Ph.D. thesis on the photoemission from quantum wells and superlattices under negative electron affinity at Laboratoire de Physique de la Matière Condensée, Ecole Polytechnique (France), G.Lampel and C.Hermann as advisors

Cécile Hébert

Cécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris. As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.

Official source

Related concepts (26)

Stirling cycle

The Stirling cycle is a thermodynamic cycle that describes the general class of Stirling devices. This includes the original Stirling engine that was invented, developed and patented in 1816 by Robert Stirling with help from his brother, an engineer. The ideal Otto and Diesel cycles are not totally reversible because they involve heat transfer through a finite temperature difference during the irreversible isochoric/isobaric heat-addition and heat-rejection processes.

Isothermal process

In thermodynamics, an isothermal process is a type of thermodynamic process in which the temperature T of a system remains constant: ΔT = 0.This typically occurs when a system is in contact with an outside thermal reservoir, and a change in the system occurs slowly enough to allow the system to be continuously adjusted to the temperature of the reservoir through heat exchange (see quasi-equilibrium). In contrast, an adiabatic process is where a system exchanges no heat with its surroundings (Q = 0).

Thermodynamic cycle

A thermodynamic cycle consists of linked sequences of thermodynamic processes that involve transfer of heat and work into and out of the system, while varying pressure, temperature, and other state variables within the system, and that eventually returns the system to its initial state. In the process of passing through a cycle, the working fluid (system) may convert heat from a warm source into useful work, and dispose of the remaining heat to a cold sink, thereby acting as a heat engine.

Carnot cycle

A Carnot cycle is an ideal thermodynamic cycle proposed by French physicist Sadi Carnot in 1824 and expanded upon by others in the 1830s and 1840s. By Carnot's theorem, it provides an upper limit on the efficiency of any classical thermodynamic engine during the conversion of heat into work, or conversely, the efficiency of a refrigeration system in creating a temperature difference through the application of work to the system.

Carnot heat engine

A Carnot heat engine is a theoretical heat engine that operates on the Carnot cycle. The basic model for this engine was developed by Nicolas Léonard Sadi Carnot in 1824. The Carnot engine model was graphically expanded by Benoît Paul Émile Clapeyron in 1834 and mathematically explored by Rudolf Clausius in 1857, work that led to the fundamental thermodynamic concept of entropy. The Carnot engine is the most efficient heat engine which is theoretically possible.

Related lectures (49)

Thermodynamics: Thermal Machines and Carnot Cycle

Discusses thermal machines, focusing on the Carnot cycle and its efficiency in thermodynamics.

Stirling Cycle: Basics and Practical Realization

Covers the Stirling cycle, proposed by R. Stirling in 1816, involving two isotherms and two isochores, and its practical realization.

Generating Mechanical Work with Thermodynamic Cycles

Explores generating mechanical work with thermodynamic cycles, including the Carnot and Stirling cycles, and the conversion of work into heat.

Carnot Cycle: Rankine Cycles and Water Applications

Explores the Carnot cycle, Rankine cycles, and water applications in energy conversion.

Thermodynamics: Second Principle and Engine Efficiency