Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Introduction to Electricity: Circuits Analysis

In course

EE-100: Electrical engineering science & technology

Ce cours propose une introduction aux sciences et technologies de l'électricité en mettant l'accent sur les composants des circuits électriques. L'enseignement comprend à la fois une partie théorique avec un cours et des exercices, ainsi qu'une partie expé ...

Description

This lecture covers the analysis of circuits using Kirchhoff's laws, focusing on resistors in series and parallel configurations, current division, and voltage division. It also introduces the concept of nodal analysis and provides examples of circuit analysis using different methods.

Instructors (4)

Olivier Martin

Olivier J.F. Martin received the M.Sc. and Ph.D. degrees in physics in 1989 and 1994, respectively, from the Swiss Federal Institute of Technology, Lausanne (EPFL), Switzerland. In 1989, he joined IBM Zurich Research Laboratory, where he investigated thermal and optical properties of semiconductor laser diodes. Between 1994 and 1997 he was a research staff member at the Swiss Federal Institute of Technology, Zurich (ETHZ). In 1997 he received a Lecturer fellowship from the Swiss National Science Foundation (SNSF). During the period 1996-1999, he spent a year and a half in the U.S.A., as invited scientist at the University of California in San Diego (UCSD). In 2001 he received a Professorship grant from the SNSF and became Professor of Nano-Optics at the ETHZ. In 2003, he was appointed Professor of Nanophotonics and Optical Signal Processing at the Swiss Federal Institute of Technology, Lausanne (EPFL), where he is currently head of the Nanophotonics and Metrology Laboratory and Director of the Microengineering Section.

Philippe Allenbach

Adil Koukab

Roberto Zoia

Official source

Ontological neighbourhood

Physics

Electromagnetism: Electrical networks

Related concepts (26)

Network analysis (electrical circuits)

In electrical engineering and electronics, a network is a collection of interconnected components. Network analysis is the process of finding the voltages across, and the currents through, all network components. There are many techniques for calculating these values; however, for the most part, the techniques assume linear components. Except where stated, the methods described in this article are applicable only to linear network analysis.

Nodal analysis

In electric circuits analysis, nodal analysis, node-voltage analysis, or the branch current method is a method of determining the voltage (potential difference) between "nodes" (points where elements or branches connect) in an electrical circuit in terms of the branch currents. In analyzing a circuit using Kirchhoff's circuit laws, one can either do nodal analysis using Kirchhoff's current law (KCL) or mesh analysis using Kirchhoff's voltage law (KVL).

Equivalent circuit

In electrical engineering, an equivalent circuit refers to a theoretical circuit that retains all of the electrical characteristics of a given circuit. Often, an equivalent circuit is sought that simplifies calculation, and more broadly, that is a simplest form of a more complex circuit in order to aid analysis. In its most common form, an equivalent circuit is made up of linear, passive elements. However, more complex equivalent circuits are used that approximate the nonlinear behavior of the original circuit as well.

Linear circuit

A linear circuit is an electronic circuit which obeys the superposition principle. This means that the output of the circuit F(x) when a linear combination of signals ax1(t) + bx2(t) is applied to it is equal to the linear combination of the outputs due to the signals x1(t) and x2(t) applied separately: It is called a linear circuit because the output voltage and current of such a circuit are linear functions of its input voltage and current. This kind of linearity is not the same as that of straight-line graphs.

Voltage divider

In electronics, a voltage divider (also known as a potential divider) is a passive linear circuit that produces an output voltage (Vout) that is a fraction of its input voltage (Vin). Voltage division is the result of distributing the input voltage among the components of the divider. A simple example of a voltage divider is two resistors connected in series, with the input voltage applied across the resistor pair and the output voltage emerging from the connection between them.

Related lectures (36)

Electric Circuits Analysis

Covers the analysis of electric circuits, focusing on resistors and their combinations.

Electric Circuits: Analysis and Solutions

Focuses on analyzing electric circuits using Kirchhoff's laws to solve complex circuits with multiple loops and nodes.

Electric Circuits: Analysis and Applications

Covers the analysis and applications of electric circuits, focusing on circuit components and behavior.

Introduction to Electricity

Covers basic concepts of electricity, Ohm's Law, Kirchhoff's Laws, and circuit analysis techniques.

Circuit Fundamentals: Kirchhoff's Laws