Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Deformation and Diffusion in Crystals

In course

MSE-310: Deformation of materials

Présentation des mécanismes de déformation des matériaux inorganiques: élasticité, plasticité, fluage. ...

Description

This lecture covers the microscopic view of thermal activation, point defects, mobility, diffusion, grain growth, dislocations, strain energy, and the influence of atoms in solid solution. It explains the concepts of static restoration, recrystallization, and the movement of gaps in crystals. The lecture also delves into the dynamics of dislocations, the average speed of dislocations, and the factors influencing dislocation movement. Additionally, it discusses the diffusion of gaps, self-diffusion coefficients, and the impact of obstacles on dislocation movement. The influence of solute atoms on dislocation motion and the Portevin-Le Chatelier phenomenon in steel are also explored.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructor

Roland Logé

Roland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute. After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France. In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel. In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF. In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth. In 2013, he became Research Director at CNRS. In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (32)

Deformation (engineering)

In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.

Plasticity (physics)

In physics and materials science, plasticity (also known as plastic deformation) is the ability of a solid material to undergo permanent deformation, a non-reversible change of shape in response to applied forces. For example, a solid piece of metal being bent or pounded into a new shape displays plasticity as permanent changes occur within the material itself. In engineering, the transition from elastic behavior to plastic behavior is known as yielding. Plastic deformation is observed in most materials, particularly metals, soils, rocks, concrete, and foams.

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to undergo slow deformation while subject to persistent mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods and generally increase as they near their melting point. The rate of deformation is a function of the material's properties, exposure time, exposure temperature and the applied structural load.

Joint dislocation

A joint dislocation, also called luxation, occurs when there is an abnormal separation in the joint, where two or more bones meet. A partial dislocation is referred to as a subluxation. Dislocations are often caused by sudden trauma on the joint like an impact or fall. A joint dislocation can cause damage to the surrounding ligaments, tendons, muscles, and nerves. Dislocations can occur in any major joint (shoulder, knees, etc.) or minor joint (toes, fingers, etc.). The most common joint dislocation is a shoulder dislocation.

Solid solution strengthening

In metallurgy, solid solution strengthening is a type of alloying that can be used to improve the strength of a pure metal. The technique works by adding atoms of one element (the alloying element) to the crystalline lattice of another element (the base metal), forming a solid solution. The local nonuniformity in the lattice due to the alloying element makes plastic deformation more difficult by impeding dislocation motion through stress fields. In contrast, alloying beyond the solubility limit can form a second phase, leading to strengthening via other mechanisms (e.

Related lectures (38)

Kinetics of Dislocations

Explores the kinetics of dislocations, stress fields, and interactions with point defects and extended defects.

Plastic Deformation: Introduction to the Dislocation Model

Covers plastic deformation, dislocation model, stages, shear stress, distortion, dislocation loops, strain hardening, and crystal growth.

Materials: from Chemistry to Properties

Explores materials' behavior under stress, covering plastic deformation, elasticity, and strengthening mechanisms.

Mechanical Properties of Materials: Elastic Limit and Dislocations

Covers the elastic limit, dislocations, and plasticity mechanisms of materials.

Materials Properties: Ductility, Hardness, Toughness