Pointer (computer programming)In computer science, a pointer is an object in many programming languages that stores a memory address. This can be that of another value located in computer memory, or in some cases, that of memory-mapped computer hardware. A pointer references a location in memory, and obtaining the value stored at that location is known as dereferencing the pointer. As an analogy, a page number in a book's index could be considered a pointer to the corresponding page; dereferencing such a pointer would be done by flipping to the page with the given page number and reading the text found on that page.
Function pointerA function pointer, also called a subroutine pointer or procedure pointer, is a pointer referencing executable code, rather than data. Dereferencing the function pointer yields the referenced function, which can be invoked and passed arguments just as in a normal function call. Such an invocation is also known as an "indirect" call, because the function is being invoked indirectly through a variable instead of directly through a fixed identifier or address. Function pointers allow different code to be executed at runtime.
C (programming language)C (pronounced 'siː – like the letter c) is a general-purpose computer programming language. It was created in the 1970s by Dennis Ritchie, and remains very widely used and influential. By design, C's features cleanly reflect the capabilities of the targeted CPUs. It has found lasting use in operating systems, device drivers, protocol stacks, though decreasingly for application software. C is commonly used on computer architectures that range from the largest supercomputers to the smallest microcontrollers and embedded systems.
Smart pointerIn computer science, a smart pointer is an abstract data type that simulates a pointer while providing added features, such as automatic memory management or bounds checking. Such features are intended to reduce bugs caused by the misuse of pointers, while retaining efficiency. Smart pointers typically keep track of the memory they point to, and may also be used to manage other resources, such as network connections and file handles.
Null pointerIn computing, a null pointer or null reference is a value saved for indicating that the pointer or reference does not refer to a valid object. Programs routinely use null pointers to represent conditions such as the end of a list of unknown length or the failure to perform some action; this use of null pointers can be compared to nullable types and to the Nothing value in an option type. A null pointer should not be confused with an uninitialized pointer: a null pointer is guaranteed to compare unequal to any pointer that points to a valid object.
Tagged pointerIn computer science, a tagged pointer is a pointer (concretely a memory address) with additional data associated with it, such as an indirection bit or reference count. This additional data is often "folded" into the pointer, meaning stored inline in the data representing the address, taking advantage of certain properties of memory addressing. The name comes from "tagged architecture" systems, which reserved bits at the hardware level to indicate the significance of each word; the additional data is called a "tag" or "tags", though strictly speaking "tag" refers to data specifying a type, not other data; however, the usage "tagged pointer" is ubiquitous.
Object-oriented programmingObject-Oriented Programming (OOP) is a programming paradigm based on the concept of "objects", which can contain data and code. The data is in the form of fields (often known as attributes or properties), and the code is in the form of procedures (often known as methods). A common feature of objects is that procedures (or methods) are attached to them and can access and modify the object's data fields. In this brand of OOP, there is usually a special name such as or used to refer to the current object.
C syntaxThe syntax of the C programming language is the set of rules governing writing of software in the C language. It is designed to allow for programs that are extremely terse, have a close relationship with the resulting object code, and yet provide relatively high-level data abstraction. C was the first widely successful high-level language for portable operating-system development. C syntax makes use of the maximal munch principle. C data types The C language represents numbers in three forms: integral, real and complex.
Const (computer programming)In some programming languages, const is a type qualifier (a keyword applied to a data type) that indicates that the data is read-only. While this can be used to declare constants, in the C family of languages differs from similar constructs in other languages in being part of the type, and thus has complicated behavior when combined with pointers, references, composite data types, and type-checking. In other languages, the data is not in a single memory location, but copied at compile time on each use.
Operators in C and C++This is a list of operators in the C and C++ programming languages. All the operators (except typeof) listed exist in C++; the column "Included in C", states whether an operator is also present in C. Note that C does not support operator overloading. When not overloaded, for the operators &&, ||, and , (the comma operator), there is a sequence point after the evaluation of the first operand. C++ also contains the type conversion operators const_cast, static_cast, dynamic_cast, and reinterpret_cast.
C Sharp (programming language)C# (pronounced ) is a general-purpose high-level programming language supporting multiple paradigms. C# encompasses static typing, strong typing, lexically scoped, imperative, declarative, functional, generic, object-oriented (class-based), and component-oriented programming disciplines. The C# programming language was designed by Anders Hejlsberg from Microsoft in 2000 and was later approved as an international standard by Ecma (ECMA-334) in 2002 and ISO/IEC (ISO/IEC 23270) in 2003. Microsoft introduced C# along with .
Memory managementMemory management is a form of resource management applied to computer memory. The essential requirement of memory management is to provide ways to dynamically allocate portions of memory to programs at their request, and free it for reuse when no longer needed. This is critical to any advanced computer system where more than a single process might be underway at any time. Several methods have been devised that increase the effectiveness of memory management.
Manual memory managementIn computer science, manual memory management refers to the usage of manual instructions by the programmer to identify and deallocate unused objects, or garbage. Up until the mid-1990s, the majority of programming languages used in industry supported manual memory management, though garbage collection has existed since 1959, when it was introduced with Lisp. Today, however, languages with garbage collection such as Java are increasingly popular and the languages Objective-C and Swift provide similar functionality through Automatic Reference Counting.
The C Programming LanguageThe C Programming Language (sometimes termed K&R, after its authors' initials) is a computer programming book written by Brian Kernighan and Dennis Ritchie, the latter of whom originally designed and implemented the C programming language, as well as co-designed the Unix operating system with which development of the language was closely intertwined. The book was central to the development and popularization of C and is still widely read and used today.
Objective-CObjective-C is a high-level general-purpose, object-oriented programming language that adds Smalltalk-style messaging to the C programming language. Originally developed by Brad Cox and Tom Love in the early 1980s, it was selected by NeXT for its NeXTSTEP operating system. Due to Apple macOS’s direct lineage from NeXTSTEP, Objective-C was the standard programming language used, supported, and promoted by Apple for developing macOS and iOS applications (via their respective APIs, Cocoa and Cocoa Touch) until the introduction of the Swift programming language in 2014.
D (programming language)D, also known as dlang, is a multi-paradigm system programming language created by Walter Bright at Digital Mars and released in 2001. Andrei Alexandrescu joined the design and development effort in 2007. Though it originated as a re-engineering of C++, D is a profoundly different language —features of D can be considered streamlined and expanded-upon ideas from C++, however D also draws inspiration from other high-level programming languages, notably Java, Python, Ruby, C#, and Eiffel.
C++C++ ('si:_plVs_plVs, pronounced "C plus plus" and sometimes abbreviated as CPP) is a high-level, general-purpose programming language created by Danish computer scientist Bjarne Stroustrup. First released in 1985 as an extension of the C programming language, it has since expanded significantly over time; modern C++ currently has object-oriented, generic, and functional features, in addition to facilities for low-level memory manipulation.
Function prologue and epilogueIn assembly language programming, the function prologue is a few lines of code at the beginning of a function, which prepare the stack and registers for use within the function. Similarly, the function epilogue appears at the end of the function, and restores the stack and registers to the state they were in before the function was called. The prologue and epilogue are not a part of the assembly language itself; they represent a convention used by assembly language programmers, and compilers of many higher-level languages.
Function objectIn computer programming, a function object is a construct allowing an object to be invoked or called as if it were an ordinary function, usually with the same syntax (a function parameter that can also be a function). In some languages, particularly C++, function objects are often called functors (not related to the functional programming concept). A typical use of a function object is in writing callback functions. A callback in procedural languages, such as C, may be performed by using function pointers.
Generic programmingGeneric programming is a style of computer programming in which algorithms are written in terms of data types to-be-specified-later that are then instantiated when needed for specific types provided as parameters. This approach, pioneered by the ML programming language in 1973, permits writing common functions or types that differ only in the set of types on which they operate when used, thus reducing duplicate code. Generics was introduced to the main-stream programming with Ada in 1977 and then with templates in C++ it became part of the repertoire of professional library design.
