Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Large Area Electronic Materials: Introduction

In course

MICRO-566: Large-area electronics: devices and materials

Introduction to the physical concepts involved in the description of optical and electronic transport properties of thin-film semiconductor materials found in many large-area applications (solar cells, displays, imagers, etc) and introduction to the physic ...

Description

This lecture introduces the field of large area electronic materials, covering the differences between microelectronics and macroelectronics, the components of displays like TFT and OLED, thin film manufacturing processes, materials used in large area applications, challenges in thin film growth, and the importance of Transparent Conducting Oxides (TCOs) in optoelectronic devices.

Instructors (2)

Christophe Ballif

Christophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.

Franz-Josef Haug

I studied Physics between 1990 and 1996 at the Universities of Ulm (Germany) and Waikato (New Zealand). While specializing mostly on Theoretical Physics and Quantum Theory during my studies, I turned towards Experimental Physics for a graduate work on gas-phase epitaxy of silicon. After that, I pursued a PhD program at ETH Zürich (Switzerland), studying Cu(In,Ga)Se2 solar cells. As PostDoc, I went to EMPA (Switzerland) to work on plasma processes for hard coatings of TiN and to the Jülich Research Centre in Germany to study light scattering ZnO front contacts for solar cells. In 2005 I joined the Institute of Microengineering (IMT) at the University of Neuchatel to lead a research group on thin film silicon solar cells within the PV-Lab. In 2009 the IMT was integrated into EPFL. My main research interests are optics, charge transport in semiconductors and renewable energy in general. My current work is devoted to passivating contacts for crystalline silicon solar cells, using thin silicon films as contact layers. In 2015 I was appointed Maitre d'Enseignement et Recherche (Senior Lecturer and Scientist) and member of the Faculty of STI. From 2013 to 2015 I was member of the EFPL Teachers Council (CCE) and from 2016 and 2018 I was elected into the Council of the Engineering School (CF-STI). In 2020 I was elected to become a member of CF-STI. My main objective for the legislature is to represent the role of EPFL's intermediate staff and to raise the awareness for concerns of the satellite campuses.

Official source

Ontological neighbourhood

Energy engineering

Solar power: Topics in solar power

Electrical engineering

Photonics: Topics in photonics

Related concepts (32)

Thin-film solar cell

Thin-film solar cells are made by depositing one or more thin layers (thin films or TFs) of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (μm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 μm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon (a-Si, TF-Si).

Solar cell

A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical phenomenon. It is a form of photoelectric cell, defined as a device whose electrical characteristics, such as current, voltage, or resistance, vary when exposed to light. Individual solar cell devices are often the electrical building blocks of photovoltaic modules, known colloquially as solar panels.

Thin film

A thin film is a layer of material ranging from fractions of a nanometer (monolayer) to several micrometers in thickness. The controlled synthesis of materials as thin films (a process referred to as deposition) is a fundamental step in many applications. A familiar example is the household mirror, which typically has a thin metal coating on the back of a sheet of glass to form a reflective interface. The process of silvering was once commonly used to produce mirrors, while more recently the metal layer is deposited using techniques such as sputtering.

Liquid-crystal display

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly but instead use a backlight or reflector to produce images in color or monochrome. LCDs are available to display arbitrary images (as in a general-purpose computer display) or fixed images with low information content, which can be displayed or hidden: preset words, digits, and seven-segment displays (as in a digital clock) are all examples of devices with these displays.

OLED

An organic light-emitting diode (OLED), also known as organic electroluminescent (organic EL) diode, is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, and portable systems such as smartphones and handheld game consoles.

Related lectures (36)

Thin-film transistors and flat-panel displays

Explores the history, applications, and technologies of thin-film transistors and flat-panel displays, including LCD, OLED, and advanced color e-paper.

Thin Films and Tandem Solar Cells

Covers thin film solar cells, their advantages, market status, and challenges, including CdTe, CIGS, and perovskite cells, and explores the potential of multijunction cells.

Crystalline Silicon Absorption

Explores the properties of crystalline silicon absorbers in solar cells, discussing absorption coefficients, dispersion effects, and absorption mechanisms in semiconductors.

Introduction: Large Area Electronic Materials

Covers large area electronic materials, including components of TFT displays, photocopiers, and thin film solar cells, as well as manufacturing processes and global market trends.

Large Area Electronic Materials: Emerging Applications