Lecture

Creep Test: Mechanisms and Behavior

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

MSE-310: Deformation of materials

Présentation des mécanismes de déformation des matériaux inorganiques: élasticité, plasticité, fluage. ...

Description

This lecture covers the creep test, a method to study the deformation and rupture of materials over time. It explains the three stages of creep (primary, secondary, and tertiary) and the Andrade equation used to describe the first two stages. The lecture also delves into high-temperature creep, the influence of short-circuited diffusion, and dynamic recrystallization. Various creep mechanisms such as dislocational creep, diffusion creep, and grain boundary sliding are discussed, along with the factors affecting creep behavior like grain size and temperature. The lecture concludes with insights on superplasticity, a phenomenon observed in materials with high strain rate sensitivity.

Instructor

Roland Logé

Roland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute. After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France. In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel. In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF. In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth. In 2013, he became Research Director at CNRS. In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (31)

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to undergo slow deformation while subject to persistent mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods and generally increase as they near their melting point. The rate of deformation is a function of the material's properties, exposure time, exposure temperature and the applied structural load.

Deformation (engineering)

In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.

Deformation (physics)

In physics and continuum mechanics, deformation is the transformation of a body from a reference configuration to a current configuration. A configuration is a set containing the positions of all particles of the body. A deformation can occur because of external loads, intrinsic activity (e.g. muscle contraction), body forces (such as gravity or electromagnetic forces), or changes in temperature, moisture content, or chemical reactions, etc. Strain is related to deformation in terms of relative displacement of particles in the body that excludes rigid-body motions.

Grain boundary strengthening

In materials science, grain-boundary strengthening (or Hall–Petch strengthening) is a method of strengthening materials by changing their average crystallite (grain) size. It is based on the observation that grain boundaries are insurmountable borders for dislocations and that the number of dislocations within a grain has an effect on how stress builds up in the adjacent grain, which will eventually activate dislocation sources and thus enabling deformation in the neighbouring grain as well.

Tensile testing

Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics.

Related lectures (64)

Plastic Deformation and Energy Accumulation

Explores energy accumulation in materials during plastic deformation and the effects of dislocation density and heating.

Mechanical Behavior of Materials: Deformation & Fatigue

Explores deformation mechanisms, cyclic loading, and fatigue phenomena in materials.

Deformation Part 2: Plasticity and Torsion Tests

Delves into plasticity, torsion tests, hardness techniques, and material stability criteria.

Mechanical Properties & Strengthening Mechanisms

Explores mechanical properties, plastic deformation, dislocations, strengthening mechanisms, and high temperature plasticity in alloys.

Forging: Cracking and Damage