Lecture

Martensitic Transformation: Metals and Alloys

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

MSE-234: Mechanical behaviour of materials

Ce cours est une introduction au comportement mécanique, à l'élaboration, à la structure et au cycle de vie des grandes classes de matériaux de structure (métaux, polymères, céramiques et composites) ...

Description

This lecture discusses the martensitic transformation in metals and alloys, focusing on the formation of martensite from austenite, the role of carbon atoms, and the contrast with diffusive transformations. It covers the characteristics, speed, and extent of the transformation, as well as the effects of alloying elements. The process of austenitization, quenching, and the formation of bainite are also explained, along with TTT diagrams and cooling transformation curves.

Instructors (3)

Andreas Mortensen

Andreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.

David Hernandez Escobar

Expertise Physical metallurgy, ceramics, micro-mechanical testing Education Ph.D. Materials Science and Engineering | 2016 – 2021 Michigan State University B.S. Materials Engineering | 2012 – 2016 Universidad Politécnica de Madrid

Julie Nathalie S Gheysen

Professionals experiences PhD student 2018–2022 Université Catholique de Louvain Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Alloys

Chemistry

Organic chemistry: Organometallic chemistry

Related concepts (32)

Alloy

An alloy is a mixture of chemical elements of which at least one is a metal. Unlike chemical compounds with metallic bases, an alloy will retain all the properties of a metal in the resulting material, such as electrical conductivity, ductility, opacity, and luster, but may have properties that differ from those of the pure metals, such as increased strength or hardness. In some cases, an alloy may reduce the overall cost of the material while preserving important properties.

Martempering

Martempering is also known as stepped quenching or interrupted quenching. In this process, steel is heated above the upper critical point (above the transformation range) and then quenched in a hot-oil, molten-salt, or molten-lead bath kept at a temperature of 150-300 °C. The workpiece is held at this temperature above martensite start (Ms) point until the temperature becomes uniform throughout the cross-section of the workpiece. After that, it is cooled in air or oil to room temperature. The steel is then tempered.

Metal

A metal (from Ancient Greek μέταλλον métallon 'mine, quarry, metal') is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically ductile (can be drawn into wires) and malleable (they can be hammered into thin sheets). These properties are the result of the metallic bond between the atoms or molecules of the metal. A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.

Aluminium alloy

An aluminium alloy (or aluminum alloy; see spelling differences) is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions.

Heavy metals

Heavy metals are generally defined as metals with relatively high densities, atomic weights, or atomic numbers. The criteria used, and whether metalloids are included, vary depending on the author and context. In metallurgy, for example, a heavy metal may be defined on the basis of density, whereas in physics the distinguishing criterion might be atomic number, while a chemist would likely be more concerned with chemical behaviour. More specific definitions have been published, none of which have been widely accepted.

Related lectures (64)

Metals and Alloys: Microstructures and Transformations

Explores metals and alloys, focusing on microstructures, transformations, energy footprints, and extraction processes.

Metallurgical Processes: Hardening and Maturation

Explores metallurgical hardening processes and microstructure evolution in metals and alloys through heat treatment.

Metallurgy: Martensitic Transformation and TTT Diagrams

Discusses martensitic transformation in metals, focusing on TTT diagrams and the effects of cooling rates on phase formation.

Metals and Alloys: Fe-C System

Explores the equilibrium phase diagram of the Fe-C system and the structures formed in steels and cast irons.

Microstructures in Metals