Lecture

Photovoltaics

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

MICRO-566: Large-area electronics: devices and materials

Introduction to the physical concepts involved in the description of optical and electronic transport properties of thin-film semiconductor materials found in many large-area applications (solar cells, displays, imagers, etc) and introduction to the physic ...

Description

This lecture covers the principles of photovoltaics, starting with the discovery of the photovoltaic effect by Edmund Becquerel in 1839. It explains the absorption process in semiconductors, the importance of bandgap, and the separation of electron-hole pairs. The lecture also delves into topics like air mass, solar spectra, irradiation, and spectral changes of illumination. It discusses the diode equation, ideality factor, and the I-V characteristics under illumination. Furthermore, it explores the Shockley-Queisser limit, efficiency, losses, and the development of solar cell technologies over time.

Instructors (2)

Franz-Josef Haug

I studied Physics between 1990 and 1996 at the Universities of Ulm (Germany) and Waikato (New Zealand). While specializing mostly on Theoretical Physics and Quantum Theory during my studies, I turned towards Experimental Physics for a graduate work on gas-phase epitaxy of silicon. After that, I pursued a PhD program at ETH Zürich (Switzerland), studying Cu(In,Ga)Se2 solar cells. As PostDoc, I went to EMPA (Switzerland) to work on plasma processes for hard coatings of TiN and to the Jülich Research Centre in Germany to study light scattering ZnO front contacts for solar cells. In 2005 I joined the Institute of Microengineering (IMT) at the University of Neuchatel to lead a research group on thin film silicon solar cells within the PV-Lab. In 2009 the IMT was integrated into EPFL. My main research interests are optics, charge transport in semiconductors and renewable energy in general. My current work is devoted to passivating contacts for crystalline silicon solar cells, using thin silicon films as contact layers. In 2015 I was appointed Maitre d'Enseignement et Recherche (Senior Lecturer and Scientist) and member of the Faculty of STI. From 2013 to 2015 I was member of the EFPL Teachers Council (CCE) and from 2016 and 2018 I was elected into the Council of the Engineering School (CF-STI). In 2020 I was elected to become a member of CF-STI. My main objective for the legislature is to represent the role of EPFL's intermediate staff and to raise the awareness for concerns of the satellite campuses.

Christophe Ballif

Christophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.

Official source

Ontological neighbourhood

Energy engineering

Solar power: Topics in solar power

Related concepts (32)

Solar-cell efficiency

Solar-cell efficiency refers to the portion of energy in the form of sunlight that can be converted via photovoltaics into electricity by the solar cell. The efficiency of the solar cells used in a photovoltaic system, in combination with latitude and climate, determines the annual energy output of the system. For example, a solar panel with 20% efficiency and an area of 1 m2 will produce 200 kWh/yr at Standard Test Conditions if exposed to the Standard Test Condition solar irradiance value of 1000 W/m2 for 2.

Organic solar cell

An organic solar cell (OSC) or plastic solar cell is a type of photovoltaic that uses organic electronics, a branch of electronics that deals with conductive organic polymers or small organic molecules, for light absorption and charge transport to produce electricity from sunlight by the photovoltaic effect. Most organic photovoltaic cells are polymer solar cells. The molecules used in organic solar cells are solution-processable at high throughput and are cheap, resulting in low production costs to fabricate a large volume.

Solar cell research

There are currently many research groups active in the field of photovoltaics in universities and research institutions around the world. This research can be categorized into three areas: making current technology solar cells cheaper and/or more efficient to effectively compete with other energy sources; developing new technologies based on new solar cell architectural designs; and developing new materials to serve as more efficient energy converters from light energy into electric current or light absorbers and charge carriers.

Thin-film solar cell

Thin-film solar cells are made by depositing one or more thin layers (thin films or TFs) of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (μm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 μm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon (a-Si, TF-Si).

Concentrator photovoltaics

Concentrator photovoltaics (CPV) (also known as concentration photovoltaics) is a photovoltaic technology that generates electricity from sunlight. Unlike conventional photovoltaic systems, it uses lenses or curved mirrors to focus sunlight onto small, highly efficient, multi-junction (MJ) solar cells. In addition, CPV systems often use solar trackers and sometimes a cooling system to further increase their efficiency. Systems using high-concentration photovoltaics (HCPV) possess the highest efficiency of all existing PV technologies, achieving near 40% for production modules and 30% for systems.

Related lectures (64)

High Efficiency Solar Cells

Explores high efficiency solar cells, including C-Si and III-V junctions, epitaxial growth, and rear contact recombination.

Photovoltaics: fundamentals and efficiency

Explores the fundamentals and efficiency of photovoltaics, covering topics such as the photovoltaic effect, bandgap optimization, and efficiency limits.

Crystalline Silicon Absorption

Explores the properties of crystalline silicon absorbers in solar cells, discussing absorption coefficients, dispersion effects, and absorption mechanisms in semiconductors.

Solar Cells: Working Principles

Covers the working principles of solar cells and the challenges in improving efficiency.

Absorption, generation and recombination