Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

64-bit Kogge-Stone Adder: Radix-4, Sparsity-4

In course

EE-431: Advanced VLSI design

In this project-based course, students collect hands-on experience with designing full-custom digital VLSI circuits in dynamic logic. They learn to carry out the design and optimization on transistor level, including logic and clock tree, the verification, ...

Description

This lecture covers the project definition for designing a 64-bit Kogge-Stone adder with Radix-4 and Sparsity-4. Topics include parallel prefix adders, carry merging, and top-level block diagrams. The lecture emphasizes the design specifications and considerations for achieving a reg-reg delay of less than 500ps.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (2)

Alexandre Sébastien Julien Levisse

Andreas Peter Burg

Andreas Burg was born in Munich, Germany, in 1975. He received his Dipl.-Ing. degree in 2000 from the Swiss Federal Institute of Technology (ETH) Zurich, Zurich, Switzerland. He then joined the Integrated Systems Laboratory of ETH Zurich, from where he graduated with the Dr. sc. techn. degree in 2006. In 1998, he worked at Siemens Semiconductors, San Jose, CA. During his doctoral studies, he was an intern with Bell Labs Wireless Research for a total of one year. From 2006 to 2007, he held positions as postdoctoral researcher at the Integrated Systems Laboratory and at the Communication Theory Group of the ETH Zurich. In 2007 he co-founded Celestrius, an ETH-spinoff in the field of MIMO wireless communication, where he was responsible for the ASIC development as Director for VLSI. In January 2009, he joined ETH Zurich as SNF Assistant Professor and as head of the Signal Processing Circuits and Systems group at the Integrated Systems Laboratory. In January 2011, he became a Tenure Track Assistant Professor at the Ecole Polytechnique Federale de Lausanne (EPFL) where he is leading the Telecommunications Circuits Laboratory in the School of Engineering. In June 2018 he was promoted to the role of a Tenured Associate Professor. In 2000, Mr. Burg received the Willi Studer Award and the ETH Medal for his diploma and his diploma thesis, respectively. Mr. Burg was also awarded an ETH Medal for his Ph.D. dissertation in 2006. In 2008, he received a 4-years grant from the Swiss National Science Foundation (SNF) for an SNF Assistant Professorship. In his professional career, Mr. Burg was involved in the development of more than 25 ASICs. He is a member of the IEEE and of the European Association for Signal Processing (EURASIP). Research interests and expertise

Circuits and systems for telecommunications (wireless and wired)
Prototyping and silicon implementation of new communication technologies
Development of communication algorithms and optimization for hardware implementation
Low-power VLSI signal processing for communications and other applications
Digital integrated circuits
Circuits for image and video processing

Official source

Ontological neighbourhood

Computer engineering

Hardware engineering: Microprocessors

Related concepts (32)

Adder (electronics)

An adder, or summer, is a digital circuit that performs addition of numbers. In many computers and other kinds of processors adders are used in the arithmetic logic units (ALUs). They are also used in other parts of the processor, where they are used to calculate addresses, table indices, increment and decrement operators and similar operations. Although adders can be constructed for many number representations, such as binary-coded decimal or excess-3, the most common adders operate on binary numbers.

Logic family

In computer engineering, a logic family is one of two related concepts: A logic family of monolithic digital integrated circuit devices is a group of electronic logic gates constructed using one of several different designs, usually with compatible logic levels and power supply characteristics within a family. Many logic families were produced as individual components, each containing one or a few related basic logical functions, which could be used as "building-blocks" to create systems or as so-called "glue" to interconnect more complex integrated circuits.

CMOS

Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", siːmɑːs, -ɒs) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFETs for logic functions. CMOS technology is used for constructing integrated circuit (IC) chips, including microprocessors, microcontrollers, memory chips (including CMOS BIOS), and other digital logic circuits.

Dynamic logic (digital electronics)

In integrated circuit design, dynamic logic (or sometimes clocked logic) is a design methodology in combinational logic circuits, particularly those implemented in metal–oxide–semiconductor (MOS) technology. It is distinguished from the so-called static logic by exploiting temporary storage of information in stray and gate capacitances. It was popular in the 1970s and has seen a recent resurgence in the design of high-speed digital electronics, particularly central processing units (CPUs).

Static random-access memory

Static random-access memory (static RAM or SRAM) is a type of random-access memory (RAM) that uses latching circuitry (flip-flop) to store each bit. SRAM is volatile memory; data is lost when power is removed. The term static differentiates SRAM from DRAM (dynamic random-access memory) — SRAM will hold its data permanently in the presence of power, while data in DRAM decays in seconds and thus must be periodically refreshed.

Related lectures (33)

Untitled

Introduction to Dynamic Logic Log in to Mediaspace to watch this video

Introduces Dynamic Logic, covering its principles, issues, and design variations, including footed vs. unfooted designs and multiple-output structures.

Introduction to Advanced VLSI Design Log in to Mediaspace to watch this video

Covers Advanced VLSI Design concepts, including Full Custom Design and Parallel Prefix Adder.

Transistor MOSFET: Operation and Applications Log in to Mediaspace to watch this video

Explores the operation and applications of the MOSFET transistor in various regimes and logic circuits.

Transistor MOS and CMOS Logic Log in to Mediaspace to watch this video