Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Elasticity: Isotropic Solids

In course

PHYS-105: Advanced physics II (thermodynamics)

Ce cours présente la thermodynamique en tant que théorie permettant une description d'un grand nombre de phénomènes importants en physique, chimie et ingéniere, et d'effets de transport. Une introduction à la physique statistique renforce les notions acqu ...

Description

This lecture covers the concept of elasticity in isotropic solids, including hydrostatic pressure, Young's and Poisson's modules, and shear. It discusses the deformation of homogeneous elongated bars under different conditions and explores the behavior of isotropic elastic solids under shear stress.

Instructors (2)

Cécile Hébert

Cécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris. As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.

Jean-Philippe Ansermet

Jean-Philippe Ansermet was born March 1, 1957 in Lausanne (legal origin Vaumarcus, NE). He obtained a diploma as physics engineer of EPFL in 1980. He went on to get a PhD from the University of Illinois at Urbana-Champaign where, from 1985 to 1987, he persued as post-doc with Prof. Slichter his research on catalysis by solid state NMR studies of molecules bound to the surface of catalysts. From 1987 to 1992 he worked at the materials research center of Ciba-Geigy, on polymers for microelectronics, composites, dielectrics and organic charge transfer complexes. In March 1992, as professor of experimental physics, he developed a laboratory on the theme of nanostructured materials and turned full professor in 1995. Since 1992, he teaches classical mechanics, first to future engineering students, since 2004 to physics majors. Since 2000, he teaches thermodynamics also, to the same group of students. He offers a graduate course in spintronics, and another on spin dynamics. His research activities concern the fabrication and properties of magnetic nanostructures produced by electrodeposition. His involvement since the early days of spintronics have allowed him to gain recognition for his work on giant magnetoresistance (CPP-GMR), magnetic relaxation of single nanostructures, and was among the leading groups demonstrating magnetization reversal by spin-polarized currents. Furthermore, his group uses nuclear magnetic resonance , on the one hand as means of investigation of surfaces and electrodes, on the other hand, as a local probe of the electronic properties of complex ferromagnetic oxides.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (24)

Shear modulus

In materials science, shear modulus or modulus of rigidity, denoted by G, or sometimes S or μ, is a measure of the elastic shear stiffness of a material and is defined as the ratio of shear stress to the shear strain: where = shear stress is the force which acts is the area on which the force acts = shear strain. In engineering , elsewhere is the transverse displacement is the initial length of the area. The derived SI unit of shear modulus is the pascal (Pa), although it is usually expressed in gigapascals (GPa) or in thousand pounds per square inch (ksi).

Poisson's ratio

In materials science and solid mechanics, Poisson's ratio (nu) is a measure of the Poisson effect, the deformation (expansion or contraction) of a material in directions perpendicular to the specific direction of loading. The value of Poisson's ratio is the negative of the ratio of transverse strain to axial strain. For small values of these changes, is the amount of transversal elongation divided by the amount of axial compression. Most materials have Poisson's ratio values ranging between 0.0 and 0.5.

Young's modulus

Young's modulus , the Young modulus, or the modulus of elasticity in tension or axial compression (i.e., negative tension), is a mechanical property that measures the tensile or compressive stiffness of a solid material when the force is applied lengthwise. It quantifies the relationship between tensile/compressive stress (force per unit area) and axial strain (proportional deformation) in the linear elastic region of a material and is determined using the formula: Young's moduli are typically so large that they are expressed not in pascals but in gigapascals (GPa).

Elastic modulus

An elastic modulus (also known as modulus of elasticity) is the unit of measurement of an object's or substance's resistance to being deformed elastically (i.e., non-permanently) when a stress is applied to it. The elastic modulus of an object is defined as the slope of its stress–strain curve in the elastic deformation region: A stiffer material will have a higher elastic modulus. An elastic modulus has the form: where stress is the force causing the deformation divided by the area to which the force is applied and strain is the ratio of the change in some parameter caused by the deformation to the original value of the parameter.

Price elasticity of demand

A good's price elasticity of demand (, PED) is a measure of how sensitive the quantity demanded is to its price. When the price rises, quantity demanded falls for almost any good, but it falls more for some than for others. The price elasticity gives the percentage change in quantity demanded when there is a one percent increase in price, holding everything else constant. If the elasticity is −2, that means a one percent price rise leads to a two percent decline in quantity demanded.

Related lectures (49)

Elasticity and Deformation

Covers stress, strain, modulus of elasticity, and material behavior under different loads.

Linear Elasticity and Atomic Structure

Explores linear elasticity properties of materials and their atomic structure, covering stresses, strains, rigidity, and loading cases.

Elasticity and Deformation

Covers elasticity, deformation, stress-strain relationships, anisotropy, measurement methods, yield strength, and energy storage in materials.

Deformation of Materials: Stresses, Deformations, and Elasticity

Explores the deformation of materials through stresses, deformations, and elasticity, focusing on the behavior of metals, ceramics, and polymers.

Elasticity-Plasticity: Materials Science Fundamentals