Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Plasticity: Bending of an Elastic-Perfectly-Plastic Beam

Description

This lecture covers the bending of an elastic-perfectly-plastic beam, discussing the moment-curvature relation, yield moment, and the behavior of the beam beyond the initial yield point. It explains the stress distribution, strain-curvature relationship, and the moment-curvature relationship for different scenarios.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (3)

John Martin Kolinski

Dr. Kolinski studied Applied Mathematics (Sc.M.) and Applied Physics (Ph.D.) at Harvard University, completing a PhD under the supervision of L. Mahadevan and Shmuel Rubinstein on the role of air in droplet impact. John did his post-doc at the Hebrew University of Jerusalem in Israel supported by the Fulbright post-doctoral fellowship. At HUJI, he worked on interfacial instabilities in soft matter in the labs of Eran Sharon and Jay Fineberg. John continues his research into interfacial mechanics at EPFL in EMSI, his newly founded laboratory for the study of Engineering Mechanics of Soft Interfaces.

John Botsis

John (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.

William Curtin

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (32)

Stress–strain curve

In engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking, curves representing the relationship between stress and strain in any form of deformation can be regarded as stress–strain curves.

Stress–strain analysis

Stress–strain analysis (or stress analysis) is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. In simple terms we can define stress as the force of resistance per unit area, offered by a body against deformation.

Yield (engineering)

In materials science and engineering, the yield point is the point on a stress-strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and will return to its original shape when the applied stress is removed. Once the yield point is passed, some fraction of the deformation will be permanent and non-reversible and is known as plastic deformation.

Deformation (engineering)

In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.

Linear elasticity

Linear elasticity is a mathematical model of how solid objects deform and become internally stressed due to prescribed loading conditions. It is a simplification of the more general nonlinear theory of elasticity and a branch of continuum mechanics. The fundamental "linearizing" assumptions of linear elasticity are: infinitesimal strains or "small" deformations (or strains) and linear relationships between the components of stress and strain. In addition linear elasticity is valid only for stress states that do not produce yielding.

Related lectures (38)

Elasticity and Deformation

Covers stress, strain, modulus of elasticity, and material behavior under different loads.

Elasticity-Plasticity: Materials Science Fundamentals

Covers elasticity, plasticity, stress-strain relationships, and material behavior under different loading conditions.

Elasticity: Constitutive Modelling in Geomechanics

Explores constitutive equations in geomechanics, stress-strain behavior, and practical applications in engineering.