Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Stereolithography: Basic Principles and Equipment

In course

ME-413: Introduction to additive manufacturing

The state of the art in the domain of additive production processes (the part is built by material addition without use of a shape tool) will be presented. The main application/benefits/shortcomings of the common additive processes as well as technologi ...

Description

This lecture covers the basic principles and equipment used in stereolithography, a 3D printing process where a part is built layer by layer from a photoresist material cured by a UV laser. It explains the selective consolidation process, the role of galvanometric mirrors, and the management of UV-curing. The etymology of the term 'stereolithography' is also discussed, along with the acronym SLA. Various diagrams illustrate the design and working of stereolithography machines, including the top-down approach. Mechanical properties and technical data of stereolithography equipment are presented, highlighting materials, dimensions, build volumes, and performance metrics.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (3)

Eric Boillat

Jürgen Brugger

I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.

Christophe Moser

Dr. Christophe Moser is Associate Professor of Microengineering and Industrial Relations at the Swiss Federal Institute of Technology in Lausanne. He was the co-founder and CEO of Ondax,Inc for ten years prior to joining EPFL. During this decade, he raised $15 million from corporate and venture capital sources to fund volume production of thick holographic components in glass and develop devices enabled by these components such as tunable add-drop multiplexers for telecommunications, ultra-narrowband notch filters for low frequency Raman systems, high power semi-conductor frequency-narrowed pumps for fiber lasers, single frequency fixed and tunable lasers for sensing and femtosecond pulse compressors for micro-machining applications. Dr. Moser has a Ph.D. in Electrical Engineering from the California Institute of Technology, a minor in finance and a bachelor degree in Physics from EPFL. He is the co-inventor of 24 patents, 14 peer reviewed scientific publications, 9 IEEE proceedings and a book chapter. Private interests include tennis, running, ski, basketball and family excursions. 2010: Associate Professor, EPFL, faculty Science Technique Ingenieur. 2000-2010: co-founder, CEO Ondax, Inc. 1995-2000: Graduate Research Assistant, California Institute of Technology. 1993-1995: Engineering Project manager , TESA. 1988-1993: Bachelor candidate in Physics, EPFL. MAIN PUBLICATIONS:

Moser C., Havermeyer F,.Ultra-narrowband tunable laserline notch filter, Appl. Phys. B, 95 (3), pp 597-601, 2009.

Moser C. ,Ho L., Havermeyer F,. Self-aligned Non-dispersive External Cavity Tunable Laser, 16 (21), 16691-16696 Optics Express, 2008.

Steckman, GJ , Moser C. et al. Volume holographic grating wavelength stabilized laser diodes, IEEE J. Of Selected Topics in Quantum Electronics, (13), 672-678, 2007.

Buse K, Havermeyer F, Liu W., Moser C, Psaltis D. Holographic Filters , Book Chapter Photorefractive Materials and their Applications, 2005.

Havermeyer, F; Liu, WH; Moser, C, et al. Volume holographic grating-based continuously tunable optical filter , Opt. Eng. 43 (9), 2017-2021, 2004.

Moser C., Maravic I., Schupp B., Adibi A, Psaltis D, Diffraction efficiency of localized holograms in doubly doped LiNbO3 crystals, Opt. Lett. 25: (17),1243-1245, 2000.

Official source

Related concepts (26)

3D printing

3D printing or additive manufacturing is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety of processes in which material is deposited, joined or solidified under computer control, with material being added together (such as plastics, liquids or powder grains being fused), typically layer by layer. In the 1980s, 3D printing techniques were considered suitable only for the production of functional or aesthetic prototypes, and a more appropriate term for it at the time was rapid prototyping.

Materials science

Materials science is an interdisciplinary field of researching and discovering materials. Materials engineering is an engineering field of finding uses for materials in other fields and industries. The intellectual origins of materials science stem from the Age of Enlightenment, when researchers began to use analytical thinking from chemistry, physics, and engineering to understand ancient, phenomenological observations in metallurgy and mineralogy. Materials science still incorporates elements of physics, chemistry, and engineering.

Material

Material is a substance or mixture of substances that constitutes an object. Materials can be pure or impure, living or non-living matter. Materials can be classified on the basis of their physical and chemical properties, or on their geological origin or biological function. Materials science is the study of materials, their properties and their applications. Raw materials can be processed in different ways to influence their properties, by purification, shaping or the introduction of other materials.

Composite material

A composite material (also called a composition material or shortened to composite, which is the common name) is a material which is produced from two or more constituent materials. These constituent materials have notably dissimilar chemical or physical properties and are merged to create a material with properties unlike the individual elements. Within the finished structure, the individual elements remain separate and distinct, distinguishing composites from mixtures and solid solutions.

Stereolithography

Stereolithography (SLA or SL; also known as vat photopolymerisation, optical fabrication, photo-solidification, or resin printing) is a form of 3D printing technology used for creating models, prototypes, patterns, and production parts in a layer by layer fashion using photochemical processes by which light causes chemical monomers and oligomers to cross-link together to form polymers. Those polymers then make up the body of a three-dimensional solid.

Related lectures (53)

Flexible Probes: Mechanics and Design

Explores critical strain, bending mechanics, and strain calculation in flexible probes.

Machine Learning Applications: Predicting Carbon Nanotube Properties

Covers the use of machine learning to predict the mechanical properties of carbon nanotubes and their composites through multiscale characterization techniques.

Sustainable Materials: Lifecycle, Properties, and Design

Explores material lifecycle, properties, sustainability, and design, emphasizing the importance of auditing products for sustainability and discussing the evaluation of consumer products like LEGO.

Comsol: Parallel plate capacitor

Focuses on modeling a parallel plate capacitor using Comsol, emphasizing clear project ideas and group collaboration.

Introduction to Civil Engineering Materials