Lecture

Operational Amplifiers: Noise Analysis

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In course

MICRO-330: Sensors

Principes physiques et électronique utilisés dans les capteurs. Applications des capteurs. ...

Description

This lecture covers the analysis of noise in operational amplifiers, focusing on modeling real operational amplifiers with current and voltage noise, calculating total noise at the output, and strategies to reduce noise through shielding techniques such as electrostatic, magnetostatic, and electromagnetic shielding.

Instructors (3)

Philippe Renaud

Philippe Renaud is Professor at the Microsystem Laboratory (LMIS4) at EPFL. He is also the scientific director of the EPFL Center of MicroNanoTechnology (CMI). His main research area is related to micronano technologies in biomedical applications (BioMEMS) with emphasis on cell-chips, nanofluidics and bioelectronics. Ph. Renaud is invloved in many scientifics papers in his research area. He received his diploma in physics from the University of Neuchâtel (1983) and his Ph.D. degree from the University of Lausanne (1988). He was postdoctoral fellow at University of California, Berkeley (1988-89) and then at the IBM Zürich Research Laboratory in Switzerland (1990-91). In 1992, he joined the Sensors and Actuators group of the Swiss Center for Electronics and Microtechnology (CSEM) at Neuchâtel, Switzerland. He was appointed assistant professor at EPFL in 1994 and full professor in 1997. In summer 1996, he was visiting professor at the Tohoku University, Japan. Ph. Renaud is active in several scientific committee (scientific journals, international conferences, scientific advisory boards of companies, PhD thesis committee). He is also co-founder of the Nanotech-Montreux conference. Ph. Renaud is committed to valorization of basic research through his involvement in several high-tech start-up companies.

Giovanni Boero

Expertise Nuclear magnetic resonance (NMR), Electron spin resonance (ESR), Ferromagnetic resonance (FMR), RF/MW discrete and integrated electronics, Magnetic sensors, Noise phenomena. Mission Methods based on the magnetic resonance of nuclear spins (nuclear magnetic resonance (NMR)), unpaired electrons spins (electron spin resonance (ESR)), and coupled electron spins electrons (ferromagnetic resonance (FMR)) are very powerful radiofrequency/microwave spectroscopy tools used in many research and industrial a

Herbert Shea

Expertise soft robotics, wearable haptics, electrostatic actuators, EHD Mission My lab develops flexible polymer-based actuators for a wide range of applications including haptics and soft robotics. More info at https://www.epfl.ch/labs/lmts/ Links from EPFL-LMTS Lab webpage People Research ActivitiesPublications TeachingPublications and Conference papers Link to my lab Education PhD | Physics 1997 – 1997 Harvard University MA | Physics 1993 – 1993 Harvard University

Official source

Ontological neighbourhood

Physics

Electromagnetism: Electrical networks

Related concepts (32)

Shot noise

Shot noise or Poisson noise is a type of noise which can be modeled by a Poisson process. In electronics shot noise originates from the discrete nature of electric charge. Shot noise also occurs in photon counting in optical devices, where shot noise is associated with the particle nature of light. In a statistical experiment such as tossing a fair coin and counting the occurrences of heads and tails, the numbers of heads and tails after many throws will differ by only a tiny percentage, while after only a few throws outcomes with a significant excess of heads over tails or vice versa are common; if an experiment with a few throws is repeated over and over, the outcomes will fluctuate a lot.

Signal-to-noise ratio

Signal-to-noise ratio (SNR or S/N) is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. SNR is defined as the ratio of signal power to noise power, often expressed in decibels. A ratio higher than 1:1 (greater than 0 dB) indicates more signal than noise. SNR is an important parameter that affects the performance and quality of systems that process or transmit signals, such as communication systems, audio systems, radar systems, imaging systems, and data acquisition systems.

Noise figure

Noise figure (NF) and noise factor (F) are figures of merit that indicate degradation of the signal-to-noise ratio (SNR) that is caused by components in a signal chain. These figures of merit are used to evaluate the performance of an amplifier or a radio receiver, with lower values indicating better performance. The noise factor is defined as the ratio of the output noise power of a device to the portion thereof attributable to thermal noise in the input termination at standard noise temperature T0 (usually 290 K).

Amplifier

An amplifier, electronic amplifier or (informally) amp is an electronic device that can increase the magnitude of a signal (a time-varying voltage or current). It is a two-port electronic circuit that uses electric power from a power supply to increase the amplitude (magnitude of the voltage or current) of a signal applied to its input terminals, producing a proportionally greater amplitude signal at its output. The amount of amplification provided by an amplifier is measured by its gain: the ratio of output voltage, current, or power to input.

Electromagnetic compatibility

Electromagnetic compatibility (EMC) is the ability of electrical equipment and systems to function acceptably in their electromagnetic environment, by limiting the unintentional generation, propagation and reception of electromagnetic energy which may cause unwanted effects such as electromagnetic interference (EMI) or even physical damage to operational equipment. The goal of EMC is the correct operation of different equipment in a common electromagnetic environment. It is also the name given to the associated branch of electrical engineering.

Related lectures (64)

Small Signal Analysis: High-Speed Photodetectors

Discusses the small signal analysis of high-speed photodetectors, focusing on circuit components, noise analysis, and modeling for receiver systems.

Strategies to Combat Noise Sources

Covers strategies to combat noise sources in electronics measurements and explores techniques to mitigate noise and improve measurement accuracy.

Noise in Electronics: Fundamentals and Applications

Explores noise in electronics, covering average power, signal-to-noise ratio, deterministic and random signals, and noise amplification.

Noise in Microelectronics

Explores the impact of noise in microelectronics on various circuit stages and devices.

Understanding Ideal Detectors: Theory and Applications