Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Forces in a Beam in Space

In course

CIVIL-124: Statics (for GC)

Ce cours a pour but de développer une compréhension des modèles statiques de structures. Il présente l'étude du jeu des forces dans les constructions isostatiques formées de barres, poutres et câbles. ...

Description

This lecture covers the calculation of forces in beams in space, including bending moments, shear forces, and torsional moments. The instructor demonstrates how to control efforts using the TDV and provides examples to illustrate the concepts.

Instructors (2)

Emmanuel Denarié

Emmanuel Denarié is a civil engineer, with a PhD in Materials Science. He worked for 3 years in a civil engineering company where he was in charge of the design of structures and the maintenance of bridges. He has 30 years’ experience on research and applications in the field of building materials, advanced concretes, and rehabilitation of reinforced concrete structures. He is since 2000 senior scientist and lecturer in the Laboratory for Maintenance and Safety of structures, at Ecole Polytechnique Fédérale de Lausanne (EPFL), in charge of research and development activities on the application of concretes and advanced cementitious materials to the improvement of existing and new structures. In 2013, under the lead of Emmanuel Denarié, in cooperation with CEREMA, Subdivision des Phares et Balises from Lorient, and Lafarge, a turret at sea (Le Cabon, Brittany, France) was reinforced by a cast on site 60 mm thick UHPFRC shell. The strain hardening mix was developed jointly with Lafarge. This successful application in extreme conditions of access and restraint of the substrate (thin ring geometry) opened the way to large-scale industrial applications of UHPFRC for the reinforcement of existing structures.

Katrin Beyer

Since 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory 2010-2017 Assistant Professor, EPFL. 2008-2010 Post-doctoral researcher, ETH Zürich. 2003-2007 Ph.D., Roseschool / Università di Pavia, Italy. 2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London. 2001 Diploma, Civil engineering, ETH Zürich.

Official source

Ontological neighbourhood

Civil engineering

Structural engineering: Topics in structural engineering

Related concepts (20)

Beam (structure)

A beam is a structural element that primarily resists loads applied laterally to the beam's axis (an element designed to carry primarily axial load would be a strut or column). Its mode of deflection is primarily by bending. The loads applied to the beam result in reaction forces at the beam's support points. The total effect of all the forces acting on the beam is to produce shear forces and bending moments within the beams, that in turn induce internal stresses, strains and deflections of the beam.

Bending moment

In solid mechanics, a bending moment is the reaction induced in a structural element when an external force or moment is applied to the element, causing the element to bend. The most common or simplest structural element subjected to bending moments is the beam. The diagram shows a beam which is simply supported (free to rotate and therefore lacking bending moments) at both ends; the ends can only react to the shear loads. Other beams can have both ends fixed (known as encastre beam); therefore each end support has both bending moments and shear reaction loads.

Bending

In applied mechanics, bending (also known as flexure) characterizes the behavior of a slender structural element subjected to an external load applied perpendicularly to a longitudinal axis of the element. The structural element is assumed to be such that at least one of its dimensions is a small fraction, typically 1/10 or less, of the other two. When the length is considerably longer than the width and the thickness, the element is called a beam.

I-beam

I-beam is a generic lay term for a variety of structural members with an or -shaped cross-section. Technical terms for similar items include H-beam (for universal column, UC), w-beam (for "wide flange"), universal beam (UB), rolled steel joist (RSJ), or double-T (especially in Polish, Bulgarian, Spanish, Italian and German). I-beams are typically made of structural steel and serve a wide variety of construction uses. The horizontal elements of the are called flanges, and the vertical element is known as the "web".

T-beam

A T-beam (or tee beam), used in construction, is a load-bearing structure of reinforced concrete, wood or metal, with a -shaped cross section. The top of the -shaped cross section serves as a flange or compression member in resisting compressive stresses. The web (vertical section) of the beam below the compression flange serves to resist shear stress. When used for highway bridges the beam incorporates reinforcing bars in the bottom of the beam to resist the tensile stresses which occur during bending.

Related lectures (48)

Beams under Flexure

Discusses stresses in beams under flexure, including shear forces and bending moments.

Stresses due to Flexure

Explores normal stresses in beams, bending moments, neutral axis, and maximum stresses.

Beams under nonuniform bending: Shear stresses and built-up beams

Covers shear stresses in beams and built-up beams, including shear flow calculations and stress superimposition.

Structural Mechanics: Beam Bending and Boundary Conditions Log in to Mediaspace to watch this video

Explores the moment-curvature relation for beams, emphasizing stress distribution and typical boundary conditions.

Structural Mechanics: Systems of Forces Log in to Mediaspace to watch this video