Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Time-Dependent Fracture in Materials

In course

MSE-424: Fracture of materials

This course covers elementary fracture mechanics and its application to the fracture of engineering materials. ...

Description

This lecture covers the importance of rate effects in predicting long term toughness of materials, focusing on time and temperature dependence, viscoelasticity, and the special case of creep fracture in metals. It also discusses the time-temperature equivalence in viscoelastic polymers and the micromechanisms of fracture in different materials.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Instructors (4)

Jean-Marie Drezet

1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project)

Jean-François Molinari

Professor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology.

Official source

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (32)

Bone fracture

A bone fracture (abbreviated FRX or Fx, Fx, or #) is a medical condition in which there is a partial or complete break in the continuity of any bone in the body. In more severe cases, the bone may be broken into several fragments, known as a comminuted fracture. A bone fracture may be the result of high force impact or stress, or a minimal trauma injury as a result of certain medical conditions that weaken the bones, such as osteoporosis, osteopenia, bone cancer, or osteogenesis imperfecta, where the fracture is then properly termed a pathologic fracture.

Viscoelasticity

In materials science and continuum mechanics, viscoelasticity is the property of materials that exhibit both viscous and elastic characteristics when undergoing deformation. Viscous materials, like water, resist shear flow and strain linearly with time when a stress is applied. Elastic materials strain when stretched and immediately return to their original state once the stress is removed. Viscoelastic materials have elements of both of these properties and, as such, exhibit time-dependent strain.

Fracture

Fracture is the separation of an object or material into two or more pieces under the action of stress. The fracture of a solid usually occurs due to the development of certain displacement discontinuity surfaces within the solid. If a displacement develops perpendicular to the surface, it is called a normal tensile crack or simply a crack; if a displacement develops tangentially, it is called a shear crack, slip band or dislocation. Brittle fractures occur without any apparent deformation before fracture.

Fracture mechanics

Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid mechanics to calculate the driving force on a crack and those of experimental solid mechanics to characterize the material's resistance to fracture. Theoretically, the stress ahead of a sharp crack tip becomes infinite and cannot be used to describe the state around a crack. Fracture mechanics is used to characterise the loads on a crack, typically using a single parameter to describe the complete loading state at the crack tip.

Material

Material is a substance or mixture of substances that constitutes an object. Materials can be pure or impure, living or non-living matter. Materials can be classified on the basis of their physical and chemical properties, or on their geological origin or biological function. Materials science is the study of materials, their properties and their applications. Raw materials can be processed in different ways to influence their properties, by purification, shaping or the introduction of other materials.

Related lectures (54)

Fracture and Toughness of Materials

Covers stress intensity, fracture, and toughness of materials, including the behavior of ductile and brittle materials.

Flexible Probes: Mechanics and Design

Explores critical strain, bending mechanics, and strain calculation in flexible probes.

Fracture and Toughness of Materials

Explores fracture, toughness, and crack propagation in materials, emphasizing surface energy and material resistance.

Toughness of Materials

Covers the concept of toughness of materials, emphasizing resistance to crack propagation and plastic deformation.

Materials: from Chemistry to Properties

Explores materials' behavior under stress, covering plastic deformation, elasticity, and strengthening mechanisms.

John Christopher Plummer

ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989- Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-) Privat Docent (1998) Laboratoire de Technologie des Composites et Polymères (LTC) (2000-) Laboratoire de Polymères (LP) (1998-2000) UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996 Visiting Scientist, Department of Materials Science and Engineering (DMSE) UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989 Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986 PhD, "Flux Pinning in Type-II Superconductors" UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982 BA/MA Honours Degree in Natural Sciences Awards Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989 RECENT PUBLICATIONS Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications, Thin solid films, 516, 1913 (2008). Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, Mechanical integrity of dye-sensitized photovoltaic fibers, Renewable energy, 33, 314 (2008).

Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, Hybrid glass fiber-reinforced thermoplastic nanocomposites, J. Thermoplast. Comp. Mater., 21, 103 (2008).

Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis, Macromolecules 41(19), 7079 (2008). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites, Solid State Phenomena Vol. 151, 30 (2009). Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites, Solid State Phenomena Vol. 151, 60 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Highly filled polystyrenelaponite nanocomposites prepared by emulsion polymerization, European Polm. J. 45, 621 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization, Engineering Fracture Mechanics 76, 2846 (2009) Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study, Journal of Physical Chemistry C 113, 12293 (2009). Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., Water adsorption on a sodium smectite clay surface: an ab initio study, Journal of Physical Chemistry C 113, 15218 (2009). Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications, J. Appl. Phys. 106, 054112 (2009) Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay, Journal of Thermal Analysis and Calorimetry 98, 833 (2009) Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results Macromol. React. Eng. 2010, 4, 432 (2010). Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites, J. Comp. Mater. 44, 1975 (2010). Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., Solidification behavior of PLLA/nHA nanocomposites, Comp. Sci. & Tech. 70, 1813 (2010). Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., Small Strain Mechanical Properties of Latex-Based Nanocomposite Films, Macromol. Symp. 294, 1 (2010). Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite, J Mater Sci 46, 2112 (2011).

Related concepts (32)