Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Lecture

Noise Reduction Techniques in Analog Circuits

In course

EE-594: Smart sensors for IoT

This lecture provides insights in the design and technologies of Internet-of-Things sensor nodes, with focus on low power technologies. The lectures alternate every two weeks between sensing technologies of various kinds (prof. Ionescu) and their integrate ...

Description

This lecture covers noise and offset reduction techniques in analog circuits, focusing on Autozero (AZ) and Chopper Stabilization (CS). It explains how these techniques work, their impact on noise and offset, and the trade-offs involved. The Autozero technique involves sampling to cancel offset and reduce flicker noise, while the Chopper Stabilization technique shifts 1/f noise to higher frequencies without increasing white noise. The lecture discusses the principles, implementations, and experimental results of these techniques.

This video is available exclusively on Mediaspace for a restricted audience. Please log in to MediaSpace to access it if you have the necessary permissions.

Watch on Mediaspace

Official source

Ontological neighbourhood

Information engineering

Signal processing: Digital image processing

Physics

Electromagnetism: Electrical networks

Related concepts (32)

Colors of noise

In audio engineering, electronics, physics, and many other fields, the color of noise or noise spectrum refers to the power spectrum of a noise signal (a signal produced by a stochastic process). Different colors of noise have significantly different properties. For example, as audio signals they will sound differently to human ears, and as they will have a visibly different texture. Therefore, each application typically requires noise of a specific color.

Noise (electronics)

In electronics, noise is an unwanted disturbance in an electrical signal. Noise generated by electronic devices varies greatly as it is produced by several different effects. In particular, noise is inherent in physics and central to thermodynamics. Any conductor with electrical resistance will generate thermal noise inherently. The final elimination of thermal noise in electronics can only be achieved cryogenically, and even then quantum noise would remain inherent. Electronic noise is a common component of noise in signal processing.

Pink noise

Pink noise, noise or fractal noise is a signal or process with a frequency spectrum such that the power spectral density (power per frequency interval) is inversely proportional to the frequency of the signal. In pink noise, each octave interval (halving or doubling in frequency) carries an equal amount of noise energy. Pink noise sounds like a waterfall. It is often used to tune loudspeaker systems in professional audio. Pink noise is one of the most commonly observed signals in biological systems.

Noise reduction

Noise reduction is the process of removing noise from a signal. Noise reduction techniques exist for audio and images. Noise reduction algorithms may distort the signal to some degree. Noise rejection is the ability of a circuit to isolate an undesired signal component from the desired signal component, as with common-mode rejection ratio. All signal processing devices, both analog and digital, have traits that make them susceptible to noise.

Shot noise

Shot noise or Poisson noise is a type of noise which can be modeled by a Poisson process. In electronics shot noise originates from the discrete nature of electric charge. Shot noise also occurs in photon counting in optical devices, where shot noise is associated with the particle nature of light. In a statistical experiment such as tossing a fair coin and counting the occurrences of heads and tails, the numbers of heads and tails after many throws will differ by only a tiny percentage, while after only a few throws outcomes with a significant excess of heads over tails or vice versa are common; if an experiment with a few throws is repeated over and over, the outcomes will fluctuate a lot.

Related lectures (56)

Front End Electronics: Noise and Offset Reduction

Explores front end integrated electronics design for low noise and offset in sensors, covering fundamental aspects and advanced noise reduction techniques.

Understanding Noise in Electrical Systems

Explores noise sources, Fluctuation-Dissipation Theorem, amplifier noise, interference effects, and quantization error in electrical systems.

Noise in Data Acquisition

Explores noise sources in data acquisition, including thermal, shot, and amplifier noise, as well as the effects of ADC noise.

Noise Reduction Techniques

Explores noise reduction techniques in electrical systems, covering concepts like Fourier transform, impedance matching, and dithering.

Amplified Spontaneous Emission Noise in Fiber Amplifiers