Course

MICRO-631: Selected topics in advanced manufacturing

Summary

The course aims to provide a comprehensive overview of ongoing advanced manufacturing research topics and an opportunity for students to investigate current research trends.

Lectures

Instructors (4)

Jürgen Brugger

I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.

Véronique Michaud

Background: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France) Activities: Since January 2018: Associate Dean of Engineering, in charge of Education June 2012-Dec.2017: Head of the Materials Science and Engineering Section Since April 2017: Associate Professor at EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009: Researcher at EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Author of about 300 publications of which 140 in peer-reviewed journals

Yves Bellouard

Dr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website

Fabien Sorin

Sep 2002-Oct 2007 Ph.D., Department of Materials Science and Engineering, MIT, USA. Supervisor: Prof. Yoel Fink; Thesis: Multi-material, Multifunctional Fiber Devices. After graduating with an engineering degree and a Master of Science in Physics from the Ecole Polytechnique in Palaiseau, France, Prof. Sorin joined the department of Materials Science and Engineering at the Massachusetts Institute of Technology (MIT) in Cambridge, USA for his graduate studies. He worked as a research assistant in the Photonic Bandgap Fibers and Devices Group of Professor Yoel Fink and graduated with a PhD in 2008. His PhD thesis led to the development of a new class of fiber material and devices and he was a pioneer of the field of multi-material fibers. Mar 2008-Oct 2010 Postdoctoral Associate and Research Scientist, Research Laboratory of Electronics, MIT. He then joined the Research Laboratory of Electronics at MIT as a Postdoctoral Associate, and continued as a Research Scientist associate, where he conducted independent research in the emerging field of multi-material fibers and was involved and led a variety of projects in fundamental research as well as in collaborations with local start-ups. Apr 2011 Feb 2013 Research Engineer, Saint-Gobain Recherche, Aubervilliers, France. Surface du Verre et interface Group In 2011, prof. Sorin returned to Europe and joined the company Saint-Gobain in the Saint-Gobain Recherche center, its biggest research center located near Paris in France. As a research engineer, he developed a new research thrust investigating new photonic materials and nanostructures for the energy and building industries. In particular, he and colleagues developed innovative processing approaches to deploy photonic nanostructures for light management over large area substrates, for applications in energy harvesting and saving, and for building materials and windows. Mar 2013 Present Assistant Professor tenure-track, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland. Head of the Photonic materials and fibre devices laboratory (FIMAP) Since March 2013, he is in the department of Materials Science (IMX) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) as an assistant professor tenure-track. He is starting a research group on photonic materials and fiber devices (FIMAP), continuing on developing innovative materials processing approaches and photonic device architectures to develop new solutions in energy harvesting, saving and storage, in sensing and monitoring, health care and smart fabrics.

Official source

Moodle Page

http://go.epfl.ch/MICRO-631

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Summary

The course aims to provide a comprehensive overview of ongoing advanced manufacturing research topics and an opportunity for students to investigate current research trends.

Lectures

Instructors (4)

Official source

Moodle Page

http://go.epfl.ch/MICRO-631

Lectures in this course (21)

Advanced Manufacturing of Metals: Thermal History and Microstructure

Explores thermal history, microstructure, porosity, and mechanical properties in advanced metal manufacturing processes.

Advanced Manufacturing of Metals - Part I

Explores Laser Powder Bed Fusion of metals, showcasing AM advantages in aerospace, automotive, and biomedical applications, and discussing key process parameters for successful metal AM.

Laser Advanced Manufacturing: Concepts and Applications

Covers basic optics concepts, laser micromachining, quantum photon descriptions, and thermal transfer processes in laser manufacturing.

Volumetric Printing: Advanced Manufacturing Techniques

Introduces volumetric printing as a solution to traditional 3D printer limitations, covering advanced manufacturing techniques and bioprinting applications.

Advanced DLP Printing: Basics and Applications

Covers the basics of DLP printing, radical polymerization, photoinitiators, and CLIP.

Related courses (31)

MSE-101(a): Materials:from chemistry to properties

Ce cours permet l'acquisition des notions essentielles relatives à la structure de la matière, aux équilibres et à la réactivité chimique en liaison avec les propriétés mécaniques, thermiques, électriques et magnétiques des matériaux. ...

MSE-234: Mechanical behaviour of materials

Ce cours est une introduction au comportement mécanique, à l'élaboration, à la structure et au cycle de vie des grandes classes de matériaux de structure (métaux, polymères, céramiques et composites) ...

MSE-431: Physical chemistry of polymeric materials

The student has a basic understanding of the physical and physicochemical principles which result from the chainlike structure of synthetic macromolecules. The student can predict major characteristics of a polymer from its chemical structure and molecular ...

MICRO-301: Manufacturing technologies

This course gives an introduction to production methods and manufacturing technologies used in microengineering. The focus is given on the understanding of physical phenomena underlying the processes, the relation between materials, manufacturing processes ...

MICRO-505: Organic and printed electronics

This course addresses the implementation of organic and printed electronics technologies using large area manufacturing techniques. It will provide knowledge on materials, printing techniques, devices, systems, and applications: state of the art and curren ...