Concept

Robin boundary condition

In mathematics, the Robin boundary condition (ˈrɒbɪn; properly ʁɔbɛ̃), or third type boundary condition, is a type of boundary condition, named after Victor Gustave Robin (1855–1897). When imposed on an ordinary or a partial differential equation, it is a specification of a linear combination of the values of a function and the values of its derivative on the boundary of the domain. Other equivalent names in use are Fourier-type condition and radiation condition. Robin boundary conditions are a weighted combination of Dirichlet boundary conditions and Neumann boundary conditions. This contrasts to mixed boundary conditions, which are boundary conditions of different types specified on different subsets of the boundary. Robin boundary conditions are also called impedance boundary conditions, from their application in electromagnetic problems, or convective boundary conditions, from their application in heat transfer problems (Hahn, 2012). If Ω is the domain on which the given equation is to be solved and ∂Ω denotes its boundary, the Robin boundary condition is: for some non-zero constants a and b and a given function g defined on ∂Ω. Here, u is the unknown solution defined on Ω and ∂u/∂n denotes the normal derivative at the boundary. More generally, a and b are allowed to be (given) functions, rather than constants. In one dimension, if, for example, Ω = [0,1], the Robin boundary condition becomes the conditions: Notice the change of sign in front of the term involving a derivative: that is because the normal to [0,1] at 0 points in the negative direction, while at 1 it points in the positive direction. Robin boundary conditions are commonly used in solving Sturm–Liouville problems which appear in many contexts in science and engineering. In addition, the Robin boundary condition is a general form of the insulating boundary condition for convection–diffusion equations. Here, the convective and diffusive fluxes at the boundary sum to zero: where D is the diffusive constant, u is the convective velocity at the boundary and c is the concentration.

Official source

https://en.wikipedia.org/wiki/Robin_boundary_condition

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (32)

CS-411: Digital education

This course addresses the relationship between specific technological features and the learners' cognitive processes. It also covers the methods and results of empirical studies: do student actually learn due to technologies? In fall 2025, P. Dillenbourg w ...

PHYS-201(d): General physics : electromagnetism

The topics covered by the course are concepts of electromagnetism, properties of waves, and fluid mechanics. ...

ChE-312: Numerical methods

This course introduces students to modern computational and mathematical techniques for solving problems in chemistry and chemical engineering. The use of introduced numerical methods will be demonstrated using the Python programming language. ...

Related lectures (32)

Solute Transport in Porous Media

Explores solute transport in porous media, covering advection-diffusion equations, boundary conditions, reactions, and numerical modeling in PHREEQC.

Separation of Variables: Spatial Problems

Explores the method of separation of variables for solving spatial problems with second-order ODEs, emphasizing the significance of boundary conditions.

Viscous Jet Instability

Analyzes the instability of a non-viscous fluid jet and the effects of viscosity.

Related units (18)

IIE - Administration

IGM - Administration

Earthquake Engineering and Structural Dynamics Laboratory

Related MOOCs (1)

Introduction to Astrophysics

How can we study the Universe we live in using the only available information it provides us with: light ? This course provides an overview of the physical phenomena at play in the astronomical objects surrounding us, from planets and stars to the cosmic filaments, from galaxies such as our own Milky Way to large galaxy clusters. The course emphasizes the links between theoretical predictions and observations. In this course, you will learn the basics of astrophysics using simplified mathematical developm

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Robin_boundary_condition

About this result

Related courses (32)

CS-411: Digital education

PHYS-201(d): General physics : electromagnetism

The topics covered by the course are concepts of electromagnetism, properties of waves, and fluid mechanics. ...

ChE-312: Numerical methods

Related lectures (32)

Solute Transport in Porous Media

Explores solute transport in porous media, covering advection-diffusion equations, boundary conditions, reactions, and numerical modeling in PHREEQC.

Separation of Variables: Spatial Problems

Explores the method of separation of variables for solving spatial problems with second-order ODEs, emphasizing the significance of boundary conditions.

Viscous Jet Instability

Analyzes the instability of a non-viscous fluid jet and the effects of viscosity.

Related publications (32)

A consistent treatment of dynamic contact angles in the sharp-interface framework with the Generalised Navier Boundary Condition

In this work, we revisit the Generalised Navier Boundary Condition (GNBC) introduced by Qian et al. in the sharp interface volume-of-fluid context. We replace the singular uncompensated Young stress by a smooth function with a characteristic width

\varepsilon \gt 0

that is understood as a physical parameter of the model. Therefore, we call the model the ‘contact region GNBC’ (CR-GNBC). We show that the model is consistent with the fundamental kinematics of the contact angle transport described by Fricke,

Cambridge University Press (CUP)2026

Damage assessment of thermal-humidity-mechanical coupling field of early-age concrete based on adaptive physics informed neural network

The crack-damage resistance of early-age concrete is affected by multiple factors such as hydration, self-drying, temperature and humidity diffusion, and material properties, which are difficult to be accurately evaluated by traditional theories and numerical models. This paper proposed an adaptive physics-informed back propagation neural network (BPINN) to accurately evaluate the damage of early-age concrete under multi-physics field coupling. The temperature and humidity diffusion and shrinkage models are

Elsevier BV2026

Adaptive FEM-DEM bridging coupling for third-body evolution in sheared granular media

The frictional behavior of dry solids in sliding contact is significantly affected by the formation and accumulation of wear particles at the interface. These particles create an amorphous layer known as the third body, which undergoes intense deformation. We show that accurately capturing the evolution of the third body requires a precise modeling of the physical dimensions of the surrounding elastic bodies and boundary conditions. This implies that a computational tribology simulation engine must resolve

Centre pour la Communication Scientifique Directe (CCSD)2026

Related people (32)

Annalisa Buffa

Teaching & PhD PhD Students Gonzalo Bonilla Moreno, Philipp Christoph Weder, Yannis Dirk Voet, Fabio Marcinno, Ferhat Sindy, Francesco Sala, Markus Renoldner, Mohamed Ben Abdelouahab, Davor Dobrota Past EPFL PhD Students Luca Coradello, Ondine Chanon, Riccardo Puppi Courses Numerical approximation of PDEs MATH-451 The course is about the derivation, theoretical analysis and implementation of the finite element method for the numerical approximation of partial differential equations in on

Katrin Beyer

Since 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory 2010-2017 Assistant Professor, EPFL. 2008-2010 Post-doctoral researcher, ETH Zürich. 2003-2007 Ph.D., Roseschool / Università di Pavia, Italy. 2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London. 2001 Diploma, Civil engineering, ETH Zürich.

Jean-Marie Drezet

1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project)

Parmenion Mavrikakis

Expertise Computational electromagnetics, integral equations, finite element analysis, metasurfaces, photonics, plasmonics and microwaves. Current Work Developing a C++ code for the modeling of light scattering in layered media with the surface integral equation method. I am a PhD student in the Electrical Engineering Department (EDEE) at École Polytechnique Fédérale de Lausanne (EPFL), affiliated with the Nanophotonics and Metrology Laboratory (NAM), part of the Microengineering Department (IEM) at EPFL. M

Andrea Rinaldo

Jacques Rappaz

Originaire de Neyruz-sur-Moudon (VD), Jacques Rappaz est né le 22 mars 1947. Après ses études primaires et secondaires à Lausanne, il étudie la physique, de 1964 à 1970, à l'Ecole Polytechnique de l'Université de Lausanne (EPUL et EPFL dès 1969) où il obtient son diplôme en janvier 1971. Il entreprend ensuite un travail de recherche en analyse numérique à l'EPFL. En avril 1976, il soutient une thèse consacrée à l'approximation spectrale d'opérateurs provenant de la physique des plasmas.De 1977 à 1980, il es

Andreas Pautz

Teaching & PhD PhD Students Sofia Portolan, Michel Saliba, Bishal Torrente, Alexis Paul Boris Claude Dupont-Bembinoff, Cynthia Camila Güttlein Past EPFL PhD Students Ting Zhu, Vladimir Vladimirov Brankov, Boris Aviv Hombourger, Damar Canggih Wicaksono, Petra Mala, Adolfo Rais, Valentyn Bykov, Daniel Jerôme Siefman, Evgeny Nikitin, Dionysios Chionis, Oskari Ville Pakari, Friederike Bostelmann, Jiani Gao, Efstathios Vlassopoulos, Alessandro Scolaro, Stefan Radman, Alexander Aures, Lubomír Bures, Ahmed Salah

Pablo Antolin Sanchez

Teaching & PhD PhD Students Philipp Christoph Weder, Davor Dobrota Past EPFL PhD Students as codirector Ondine Chanon Courses Analysis III MATH-202(c) The course studies the fundamental concepts of vector analysis and Fourier-Laplace analysis with a view to their use in solving multidisciplinary problems in scientific engineering. Analysis III (for IC) MATH-203(d) The course studies the fundamental concepts of vector analysis and Fourier-Laplace analysis with a view to thei

Raushan Singh

Marc Gruber

Administrative & Editorial Positions 2017- Vice President for Innovation at EPFL 2013- Deputy & Associate Editor: Academy of Management Journal (AMJ 2009-2016 Director of the MTE Master Program at EPFL 2000-2005 Manager of the LMU Entrepreneurship Center Academic Positions 10/2005 - present Ecole Polytechnique Fédérale de Lausanne (EPFL) Assistant Professor (2005-2008), Associate Professor (2008-2010), Full Professor (since 2011) 9/2004 -12/2004 Wharton School, University of Pennsylvania, Philadelphia Visiting Scholar 9/2000 - 9/2005 University of Munich (LMU), Munich School of Management Habilitand Vice-Director of the Institute for Innovation Research, Technology Management and Entrepreneurship (Director: Prof. Dietmar Harhoff, Ph.D.) Manager of the ODEON Center for Entrepreneurship 1/1999 -12/1999 Wharton School, University of Pennsylvania, Philadelphia Visiting Scholar 10/1995-12/1998 University of St. Gallen, HSG Research Assistant, Ph.D. candidate Degrees and Nominations 4/2005 University of Munich (LMU), Munich School of Management Venia Legendi for Management (Habilitation) 10/2000 University of St. Gallen, HSG Ph.D. in Management 10/1995 University of St. Gallen, HSG Master in Business Administration (lic. oec. HSG)

Related units (18)

IIE - Administration

IGM - Administration

Earthquake Engineering and Structural Dynamics Laboratory

Related concepts (5)

Cauchy boundary condition

In mathematics, a Cauchy (koʃi) boundary condition augments an ordinary differential equation or a partial differential equation with conditions that the solution must satisfy on the boundary; ideally so as to ensure that a unique solution exists. A Cauchy boundary condition specifies both the function value and normal derivative on the boundary of the domain. This corresponds to imposing both a Dirichlet and a Neumann boundary condition. It is named after the prolific 19th-century French mathematical analyst Augustin-Louis Cauchy.

Mixed boundary condition

In mathematics, a mixed boundary condition for a partial differential equation defines a boundary value problem in which the solution of the given equation is required to satisfy different boundary conditions on disjoint parts of the boundary of the domain where the condition is stated. Precisely, in a mixed boundary value problem, the solution is required to satisfy a Dirichlet or a Neumann boundary condition in a mutually exclusive way on disjoint parts of the boundary.

Neumann boundary condition

In mathematics, the Neumann (or second-type) boundary condition is a type of boundary condition, named after Carl Neumann. When imposed on an ordinary or a partial differential equation, the condition specifies the values of the derivative applied at the boundary of the domain. It is possible to describe the problem using other boundary conditions: a Dirichlet boundary condition specifies the values of the solution itself (as opposed to its derivative) on the boundary, whereas the Cauchy boundary condition, mixed boundary condition and Robin boundary condition are all different types of combinations of the Neumann and Dirichlet boundary conditions.

Related MOOCs (1)

Introduction to Astrophysics

Related exercises (24)

Spring in a box

A closed box of mass M is resting on a table. Inside the box is a marble of mass m, attached to the lid by a spring with spring constant k and rest length l₀. What’s the minimal amplitude A of the marble’s vertical oscillation for the box to lift from the table? We assume l₀ and k to be large enough for the marble to avoid hitting the lid or the table before the box takes off. u2005 Indication: treat both the box and the marble as material points. The box will take of if its bonding force with the table

The rocket

A rocket contains a fuel mixture that is ejected with a relative speed u with respect to the nozzle. We assume that the fuel escapes vertically towards the bottom of the nozzle. We neglect the air friction and the variation of the gravitational field with height (i.e. we treat g as a constant). The fuel mass is m, and the total mass of the rest of the rocket (tanks, accessories, etc...) is M.

Show that the rocket can only take off if the flow of burned fuel (i.e. the variation of fuel mass per unit

Car suspension problem

A car’s suspension is comfortable when it has a vertical oscillation period that our bodies are used to: the oscillation period of walking, Tu2004=u20040.8u2005s.

Find the spring constant k of the suspension in a car of mass $M = 1540\,{\rm kg}$ .
The car lowers when we place a trunk of mass $m = 70\,{\rm kg}$ in it. Find its vertical displacement.

To make the car more comfortable, we add a shock absorber/dampener that creates a friction force F⃗u2004=u2004u2005−u2005bv⃗_(z), where v⃗_(z)

Related notebooks (4)

Introduction to Reciprocal Lattices with Periodic Boundary Conditions.

Real vs. Reciprocal Space in 2D[1]¶ Introduction[2]¶ In this short notebook, we will introduce the lattice with periodic(Born- von Karman) boundary condition. Following the boundary condition, there is a transformation from real lattice to the reciprocal lattice. In the code below, we define a1 and a2 through cartesian vectors. Hence, the reciprocal vectors will be the original rotated by 90 degrees multiplied by 2pi and divided by the area of the unit cell (|a1xa2|) In [1]: i

Wavepacket construction and propagation in 1D tight-binding model

"# Wavepacket construction and propagation along the 1D chain \n", "\n", "## Introduction\n", "In this notebook, we demonstrate the wavepacket construction and propagation, which is at the heart of the semiclassical approximation. For simplicty, we will consider the familiar 1D chain described using the tight-binding Hamiltonian. We will have to take a sufficiently large number of sites

N

and impose periodic boundary conditions. For simplicity, in the code below we assume lattice constant $a =

Ewald Sphere

::: {role="main"} ::: {.jp-Cell .jp-MarkdownCell .jp-Notebook-cell} ::: {.jp-Cell-inputWrapper tabindex="0"} ::: {.jp-Collapser .jp-InputCollapser .jp-Cell-inputCollapser} ::: ::: {.jp-InputArea .jp-Cell-inputArea} ::: {.jp-InputPrompt .jp-InputArea-prompt} ::: ::: {.jp-RenderedHTMLCommon .jp-RenderedMarkdown .jp-MarkdownOutput mime-type="text/markdown"}

Ewald Sphere¶{.anchor-link} {#Ewald-Sphere}

Play with the Ewald Sphere This schematics represent the Ewald sphere for a typical high

Powder X-Ray Diffraction Analysis: Exploring Crystal Structures.

XRay Diffraction[1]¶ The purpose of this notebook is to study the powder XRay diffraction spectra of some systems. When the crystal is hit with an XRay wave, the wave is diffracted only for specific case where the Bragg condition is satisfied for one of the lattice planes in the material. For single crystal diffraction, the condition is satisfied only for specific orientation of the crystal, such that the incident ray has the correct

\theta

value for the plane. In powder XRay data, however, any plane ori