Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Fluidics

Related publications (17)

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Roberto Guarino

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Aip Publishing2024

Research data supporting 'Fiber pumps for wearable fluidic systems'

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

The dataset supporting 'Fiber pumps for wearable fluidic systems', published in Science in March 2023. In this work, we present a fluidic pump in the form of a flexible and stretchable tube. These tubes - or 'fiber pumps' - can generate significant fluidic ...

2023

Fiber pumps for wearable fluidic systems

Herbert Shea, Vito Cacucciolo, Michael James Henry Smith

Incorporating pressurized fluidic circuits into textiles can enable muscular support, thermoregulation, and haptic feedback in a convenient wearable form factor. However, conventional rigid pumps, with their associated noise and vibration, are unsuitable f ...

American Association for the Advancement of Science2023

Design and manufacture of edible microfluidic logic gates

Dario Floreano, Bokeon Kwak, Shuhang Zhang

Edible robotics is an emerging research field with potential use in environmental, food, and medical scenarios. In this context, the design of edible control circuits could increase the behavioral complexity of edible robots and reduce their dependence on ...

IEEE2023

Dielectric Elastomer Actuator-Based Valveless Impedance-Driven Pumping for Meso- and Macroscale Applications

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Armando Matthieu Walter, Amine Benouhiba, Francesco Clavica, Silje Ekroll Jahren

Impedance pumps are simple designs that allow the generation or amplification of flow. They are fluid-filled systems based on flexible tubing connected to tubing with different impedances. A periodic off-center compression of the flexible tubing causes the ...

2023

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Sofia Lydia Ntella

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Weakening effect of various pore fluids on the tensile strength of granite

Guanyi Lu

Laboratory three-point bending experiments are carried out to evaluate the effect of various fluids on the tensile strength of granite. The granite specimens were tested under both dry and saturated conditions. The fluids used to saturate the granite inclu ...

SPRINGER HEIDELBERG2022

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

A versatile and membrane-less electrochemical reactor for the electrolysis of water and brine

Demetri Psaltis, Christophe Moser, Pooria Hadikhani, Enrico Chinello

Renewables challenge the management of energy supply and demand due to their intermittency. A promising solution is the direct conversion of the excess electrical energy into valuable chemicals in electrochemical reactors that are inexpensive, scalable, an ...

2019

A Monolithic Approach to Fluid–Composite Structure Interaction

Simone Deparis, Davide Forti

We study a nonlinear fluid–structure interaction (FSI) problem between an incompressible, viscous fluid and a composite elastic structure consisting of two layers: a thin layer (membrane) in direct contact with the fluid, and a thick layer (3D linearly ela ...

Springer Verlag2017

The viscous torsional pendulum

François Gallaire, Francesco Viola

A disk that is free to rotate about its axis and connected to a torsional spring behaves as a damped oscillator when twisted and released. The initial elastic energy is periodically turned to kinetic energy and it gets progressively dissipated by the visco ...

Academic Press Ltd- Elsevier Science Ltd2017

Mind The Gap : Tip Leakage Vortex Dynamics and Cavitation in Axial Turbines

Matthieu Dreyer

The tip leakage vortex (TLV), which develops in the clearance between the blade tip and the casing of axial turbomachines, appears in many industrial applications, such as air transportation, space rockets and hydraulic machines. In the latter, cavitation ...

EPFL2015

Partial slip at fluid-solid boundaries by multiparticle collision dynamics simulations

Giuseppe Foffi, Maxim Belushkin

The understanding of the exact boundary conditions at the interface between a solid and a fluid is becoming increasingly important, as the limitations of the no-slip boundary condition are becoming apparent, especially in micro- and nanofluidics applicatio ...

Royal Soc Chemistry2013

Coupling Biot and Navier-Stokes equations for modelling fluid-poroelastic media interaction

Alfio Quarteroni

The interaction between a fluid and a poroelastic structure is a complex problem that couples the Navier-Stokes equations with the Biot system. The finite element approximation of this problem is involved due to the fact that both subproblems are indefinit ...

Elsevier2009

Do Microscopic Organisms Feel Turbulent Flows?

Alfred Johny Wüest

Microscopic organisms in aquatic environments are continuously exposed to a variety of physical and chemical conditions. Traditionally, it is accepted that due to their small size the physiology of microscopic organisms is not affected by the moving fluid ...

Amer Chemical Soc2009

A fast low-temperature micromolding process for hydrophilic microfluidic devices using UV-curable acrylated hyperbranched polymers

Jan-Anders Edvin Maansson, Yves Leterrier, Lars Schmidt

A novel UV-curable low-stress hyperbranched polymer (HBP) micromolding process is presented for the fast and low-temperature fabrication of hydrophilic microfluidic devices. Process, material and surface properties of the acrylated polyether HBP are also c ...

2007

Electrical cell manipulation in microfluidic systems

Urban Seger

This dissertation reports on the development of devices and concepts for electrical and microfluidic cell manipulation. In the present context, the term cell manipulation stands for both cell handling and cell modification. The combination of microfluidic ...

EPFL2006