Publications related to Copper extraction

Related publications (30)

Stabilization versus competing de-metalation, trans-metalation and (cyclo)-dehydrogenation of Pd porphyrins at a copper surface

Metal-porphyrins are studied intensively due their potential applications, deriving from the variety of electronic and chemical properties, tunable by selecting metal centers and functional groups. Metalation, de- and trans-metalation processes are fundame ...

Royal Soc Chemistry2024

Switching the on-surface orientation of oxygen-functionalized helicene

Christian Wäckerlin

Helicenes represent an important class of chiral organic material with promising optoelectronic properties. Hence, functionalization of surfaces with helicenes is a key step toward new organic materials devices. The deposition of a heterohelicene containin ...

Wiley2024

Tailoring nanocatalysts and reaction interfaces for water- and CO2-electrolysis

Thi Ha My Pham

Renewable energy sources offer a promising solution for mitigating sustainability and CO2 emissions-related issues due to their vast energy generation capacity. They enable hydrogen production via water electrolysis, as well as carbon capture and utilizati ...

EPFL2024

Can dd excitations mediate pairing?

Francesco Barantani, Christophe Berthod

The Cu-3d states in the high-T-c cuprates are often described as a single band of 3d(x2-y2) states, with the other four 3d states having about 2 to 3 eV higher energy due to the lower-than-octahedral crystal field at the copper sites. However, excitations ...

Elsevier2023

Development of a magnetic calcium-alginate hydrogel-sphere encapsulated with Fe-Mn-Zr ternary metal composite for heavy metal adsorption

Xinyi Huang

Heavy metal contamination has become one of the greatest global environmental problems. In this study, a magnetic calcium-alginate hydrogel-sphere encapsulated with Fe-Mn-Zr ternary-metal composite (MCHETC) was prepared through a combined co-precipitation ...

2023

Cycloalkane Oxidation Catalyzed by Copper-based Catalysts with H2O2 under Mild Conditions

Nukorn Plainpan

Copper-catalyzed cycloalkane oxidation using H2O2 as an oxidant was investigated under mild conditions. The copper catalysts studied in this work ranged from commercially-available copper(II) salts to copper(II) complexes containing polypyridyl ligands. Va ...

WILEY-V C H VERLAG GMBH2023

Electron-phonon driven unconventional superconductivity: The role of small Fermi energies and of nonadiabatic processes

Claudio Grimaldi

The very concept of high-T-c superconductivity has originated from the discovery of superconductivity in copper oxides by Bednorz and Muller in 1986. Soon after their discovery, cuprates were recognized as undoubtedly complex and radically unconventional s ...

Elsevier2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

IOP Publishing Ltd2023

A versatile platform for graphene nanoribbon synthesis, electronic decoupling, and spin polarized measurements

Donat Fabian Natterer, Johannes Schwenk

The on-surface synthesis of nano-graphenes has led the charge in prototyping structures with perspectives beyond silicon-based technology. Following reports of open-shell systems in graphene-nanoribbons (GNRs), a flurry of research activity was directed at ...

ROYAL SOC CHEMISTRY2023

Copper Complexes with Diazoolefin Ligands and their Photochemical Conversion into Alkenylidene Complexes

Rosario Scopelliti, Kay Severin, Farzaneh Fadaei Tirani, Paul Varava, Bastiaan Kooij

Homometallic copper complexes with alkenylidene ligands are discussed as intermediates in catalysis but the isolation of such complexes has remained elusive. Herein, we report the structural characterization of copper complexes with bridging and terminal a ...

Wiley-VCH Verlag GmbH2023

Revisiting the Impact of Morphology and Oxidation State of Cu on CO2 Reduction Using Electrochemical Flow Cell

Michael Graetzel, Shaik Mohammed Zakeeruddin, Dan Ren, Jing Gao

Electroreduction of carbon dioxide (CO2) in a flow electrolyzer represents a promising carbon-neutral technology with efficient production of valuable chemicals. In this work, the catalytic performance of polycrystalline copper (Cu), Cu2O-derived copper (O ...

AMER CHEMICAL SOC2022

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Michael Graetzel, Shaik Mohammed Zakeeruddin, Yuhang Liu, Dan Ren, Jing Gao, Jun Li, Meng Xia

Solar-driven carbon dioxide reduction has witnessed a renaissance in the past decades, but the system suffers from low reaction rates. Here the authors develop a copper/tin-oxide electrocatalyst, achieving a new benchmark solar-to-CO energy conversion effi ...

Nature Portfolio2022

Resurgence of DSCs with copper electrolyte: a detailed investigation of interfacial charge dynamics with cobalt and iodine based electrolytes (vol 6, pg 22204, 2018)

Ulf Anders Hagfeldt

Correction for 'Resurgence of DSCs with copper electrolyte: a detailed investigation of interfacial charge dynamics with cobalt and iodine based electrolytes' by Sourava C. Pradhan et al., J. Mater. Chem. A, 2018, 6, 22204-22214, DOI: 10.1039/C8TA06948D. ...

Royal Society of Chemistry2022

Monitoring and understanding Cu catalyst dissolution during CO2 electroreduction

Jan Vávra

Electrochemical reduction of carbon dioxide is a promising approach to decrease the amount of anthropogenic CO2 being released into the atmosphere, provided that a surplus of renewable electrical energy is available. Copper based materials are at the cente ...

EPFL2022

Active sites on copper-based catalysts for electrochemical CO2 reduction selectively to C2+ products

Jie Zhang

Electrochemical CO2 reduction (eCO2RR) towards value-added chemicals, powered by renewable electricity, is a promising technology for storing the intermittent renewable energy in the form of chemical bonds. Among the various products of eCO2RR, multi-carbo ...

EPFL2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Copper, my precious!

Raffaella Buonsanti

To produce chemicals and fuels from CO2 and water while storing excess energy from renewable resources will play a big role in sustainability. Three decades ago, we learned that copper possesses the unique ability to break the stable CO2 bonds and to form ...

NATURE PORTFOLIO2021

New Insights into the Interface of Electrochemical Flow Cells for Carbon Dioxide Reduction to Ethylene

Michael Graetzel, Shaik Mohammed Zakeeruddin, Dan Ren, Jing Gao

The implementation of an electrochemical flow cell has enabled improved efficiency for CO2 reduction. However, in situ spectroscopic insights into the interface are still lacking. Here, we investigate a series of copper layers with different thicknesses on ...

AMER CHEMICAL SOC2021

Experimental Investigation of a Small-Scale Organic Rankine Cycle Turbo-Generator Supported on Gas-Lubricated Bearings

Jürg Alexander Schiffmann, Kévin Rosset

Waste heat recovery (WHR) is expected to contribute to reducing CO2 emissions from trucks. Organic Rankine cycle (ORC) systems show the highest potential for this application, but still lack efficient small-scale expansion devices, in practice. A novel tur ...

2021

Defect formation and mitigation during laser powder bed fusion of copper

Carl Tore Viktor Lindström

Additive manufacturing (AM) is a group of processing technologies which has the potential to revolutionize manufacturing by allowing easy manufacturing of complex shapes and small series. One AM-method which is of high interest for processing of metals is ...

EPFL2021