Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Diatomaceous earth

Related publications (32)

Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete

Karen Scrivener

With the decrease in availability of common supplementary cementitious materials (SCMs) such as fly ash in Europe, the search for appropriate SCMs should be dealt with locally. A com-bination of abundant low-grade calcined clay and limestone powder has pro ...

AMER SOC TESTING MATERIALS2023

Does carbon footprint reduction impair mechanical properties and service life of concrete?

Karen Scrivener, Diana Londoño Zuluaga

The aim of this study is to evaluate how much the changes in the concrete mix design, which enable carbon footprint reduction, are impacting mechanical properties and predicted service life of concrete structure. The starting point of this study was concre ...

SPRINGER2023

Atomistic modeling of C-S-H: bulk and surface

Ziga Casar

By replacing part of Portland cement with so-called supplementary cementitious materials (SCMs) it is possible to reduce the CO2 footprint of the cement industry. These SCMs are commonly limestone, calcined clay, slag and fly ash. While doing so the early ...

EPFL2023

Data-driven optimization tool for the functional, economic, and environmental properties of blended cement concrete using supplementary cementitious materials

Hisham Tarek Mohamed Hafez

The need to produce more sustainable concrete is proving imminent given the rising environmental concerns facing the industry. Blended cement concrete, based on any of the prominent supplementary cementitious materials (SCMs) such as fly ash, ground granul ...

ELSEVIER2023

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Alastair Thomas Matthew Marsh

The use of calcined clays as supplementary cementitious materials provides the opportunity to significantly reduce the cement industry's carbon burden; however, use at a global scale requires a deep understanding of the extraction and processing of the cla ...

SPRINGER2022

The Challenge of Grinding Ternary Blends Containing Calcined Clays and Limestone

Karen Scrivener, Franco Alberto Zunino Sommariva

The inclusion of high specific surface materials such as calcined clays in cementitious systems enhances the hydration of clinker products at very early ages, but it may also increase water demand; thus, the pursuit of a flowing concrete may demand an incr ...

MDPI2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete

Hisham Tarek Mohamed Hafez

Partially replacing ordinary Portland cement (OPC) with low-carbon supplementary cementitious materials (SCMs) in blended cement concrete (BCC) is perceived as the most promising route for sustainable concrete production. Despite having a lower environment ...

ELSEVIER SCI LTD2022

Concrete cancer : characterization of Alkali Silica Reaction early stage products by electron microscopy

Solène Anne-Lise Albinski

Concrete deterioration is a natural process, which has to be carefully monitored over a the service life of a structure. The Alkali-Silica Reaction (ASR) is a slow-process degradation, which devel-ops over decades and is therefore difficult to predict. Sin ...

EPFL2022

The Influence of some calcined clays from Nigeria as clinker substitute in cementitious systems

Karen Scrivener, François Henri Avet

This paper examines the possibility of the use of some clays calcined from Nigeria as partial substitutes for clinker in the production of Limestone Calcined Clay Cement (LC3). The clays were calcined in the oven at a temperature of 800 degrees C and for o ...

2020

Increasing the kaolinite content of raw clays using particle classification techniques for use as supplementary cementitious materials

Karen Scrivener, Franco Alberto Zunino Sommariva

The adoption of blended cements to reduce the carbon footprint has increased significantly over the last decades. Clays containing kaolinite are a promising choice due to their widespread availability. Kaolinite content is the major factor controlling the ...

ELSEVIER SCI LTD2020

Valorization of biomass derivatives through the conversion of phenol over silica-supported Mo-Re oxide catalysts

Ricardo Javier Serpell Carriquiry

Liquid-phase hydrodeoxygenation of phenol over silica-supported MoOx-ReOx catalysts was investigated at 300 degrees C and 5 MPa of H-2. Mixed-oxides catalysts with similar surface metal density (2.3 atoms of metal per nm(2) of SiO2) but different relative ...

2020

Limestone calcined clay cements (LC3): raw material processing, sulfate balance and hydration kinetics

Franco Alberto Zunino Sommariva

Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...

EPFL2020

Maximizing the use of supplementary cementitious materials (SCMs) in blended cements

Yosra Briki

Partial replacement of clinker with supplementary cementitious materials (SCMs) is an effective approach to reduce CO2 emissions related to cement production. However, there is a maximum substitution level with SCMs beyond which strength decreases. The und ...

EPFL2020

Investigation of the use of Limestone Calcined Clay Cement (LC3) applied to Thailand

Wilasinee Hanpongpun

The replacement of clinker with supplementary cementitious materials (SCMs) is the most interesting solution to reduce the CO2 emissions from cement production. The abundant availability of clays, which have a sufficient amount of kaolinite content in Thai ...

EPFL2019

Investigation of C-A-S-H composition, morphology and density in Limestone Calcined Clay Cement (LC3)

Karen Scrivener, François Henri Avet, Emmanuelle Anne Boehm Courjault

In this study, the C-A-S-H composition, morphology and density are characterized for Limestone Calcined Clay Cement (LC3-50) blends containing clays with various kaolinite contents. Significant incorporation of aluminium is observed for LC3-50 blends compa ...

Pergamon-Elsevier Science Ltd2019

Basic creep and autogenous shrinkage of Limestone Calcined Clay Cement (LC3)

Julien Ston

The use of supplementary cementitious materials (SCM) to lower the clinker factor of cements is now commonplace, for it benefits performance, economics and ecology. This thesis focuses on ternary blends of limestone and calcined kaolinitic clays, two very ...

EPFL2019

Calcined clay limestone cements (LC3)

Karen Scrivener

The use of supplementary cementitious materials (SCMs) to replace part of the clinker in cement is the most successful strategy to reduce CO2 emissions in the global cement industry. However, limited supplies of conventional SCMs make it difficult to take ...

Pergamon-Elsevier Science Ltd2018