Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Universal testing machine

Related publications (30)

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Multi-scale experimental testing on variable stiffness and damping components for semi-active structural control

Gennaro Senatore

This paper presents experimental testing of a new semi-active vibration control device comprising a shape memory polymer (SMP) core that is reinforced by an SMP-aramid composite skin. This control device works as a load-transfer component that can be integ ...

ELSEVIER SCI LTD2022

Weakening effect of various pore fluids on the tensile strength of granite

Guanyi Lu

Laboratory three-point bending experiments are carried out to evaluate the effect of various fluids on the tensile strength of granite. The granite specimens were tested under both dry and saturated conditions. The fluids used to saturate the granite inclu ...

SPRINGER HEIDELBERG2022

Cyclic metal plasticity model parameters with limited information: a constrained optimization approach

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Alexander Riley Hartloper

Tensile test data for structural steels are ubiquitous. Yet, the information monotonic loading provides with respect to the material's characteristics is limited. Notably, features of inelastic response to cyclic loading, such as the Bauschinger eect, can ...

2021

Tensile response of Ultra High Performance PE Fiber Reinforced Concretes (PE-UHPFRC) under imposed shrinkage deformations

Emmanuel Denarié, Mohamed Abdul Hafiz, Amir Hajiesmaeili

PE-UHPFRC is a new Ultra High-Performance Fiber Reinforced Concrete (UHPFRC), which is developed to reduce the environmental impact of conventional UHPFRC by replacing the steel fibers with synthetic ones and reducing the clinker content in the mix. The de ...

2021

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Deformational behavior and damage mechanism of R-UHPFRC beam subjected to fatigue loading

Eugen Brühwiler, Bartlomiej Wojciech Sawicki

The fatigue behavior of a reinforced UHPFRC (Ultra High Performance Fiber Reinforced Cementitious composite) T-shaped beam under four-point bending is investigated. The beam was subjected to a fatigue loading range equal to 49% of the static resistance and ...

2021

Experimental setup and numerical evaluation of the compression test on thin tiles for masonry timbrel vaults

Savvas Saloustros

Compressive tests on clay tiles used in historical masonry timbrel vaults are hindered by the relatively small thickness of the specimens, resulting in buckling or confinement problems depending on the loading direction. This paper presents an experimental ...

ELSEVIER SCI LTD2021

Microtensile failure mechanisms in lamellar bone: Influence of fibrillar orientation, specimen size and hydration

Johann Michler, Daniele Casari

A mechanistic understanding of bone fracture is indispensable for developing improved fracture risk assessment in clinics. Since bone is a hierarchically structured material, gaining such knowledge requires analysis at multiple length scales. Here, the ten ...

ELSEVIER SCI LTD2021

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Variable-Stiffness Tensegrity Modular Robots

Davide Zappetti

The need for a new generation of robots able to safely locomote and manipulate beside or cooperatively with humans or in un-constructed environments has recently emerged as a priority of the robotics community. ln the past two decades, this challenge has b ...

EPFL2021

Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements

Xiujiang Shen

Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...

EPFL2020

Tensile response of textile reinforced concrete

Aurelio Muttoni, Miguel Fernández Ruiz, Patrick Lorenzo Valeri

Textile Reinforced Concrete (TRC) is a cementitious composite material where a carbon or glass fabric is embedded as reinforcement. The use of TRC allows building thin and light structures, with reduced concrete covers and an enhanced durability due to the ...

2020

Joining of Oxide Dispersion-Strengthened Steel Using Spark Plasma Sintering

Cyril Cayron

Difficulties with joining oxide dispersion-strengthened (ODS) steels using classical welding processes have led to the development of alternative joining techniques such as spark plasma sintering (SPS). SPS, which is classically employed for performing sin ...

2020

Modelling of the tensile behavior of SH-UHPFRC at low and high stress levels, under very low loading rates

Emmanuel Denarié, Mohamed Abdul Hafiz

The tensile behavior under low loading rates governs to a large extend the mechanical response of Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) at early age and long term, in applications of rehabilitation. A viscoelastic-v ...

2020

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

Emmanuel Denarié, Mohamed Abdul Hafiz

The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...

Pergamon-Elsevier Science Ltd2020

Biaxial flexural response of Strain-Hardening UHPFRC circular slab elements

Eugen Brühwiler, Xiujiang Shen

The biaxial flexural response of strain-hardening UHPFRC circular slab element is investigated experimentally and analytically using the ring-on-ring test. The Digital Image Correlation (DIC) technology is applied to capture the 3D full-field of strain and ...

ELSEVIER SCI LTD2020

Dynamic study of contact damping in martensitic stainless steels using nano-indentation

Philippe Spätig, Hans-Peter Seifert

The study was undertaken to gain insight into the micro-mechanisms controlling plasticity at the micrometer scale of elastic-plastic metallic alloys. Dynamic nano-indentation tests, where a small harmonic force amplitude is superimposed during loading, ref ...

ELSEVIER2020

Tensile response of UHPFRC under very low strain rates and low temperatures

Emmanuel Denarié, Mohamed Abdul Hafiz

This paper addresses the uniaxial tensile response of Strain Hardening Ultra High-Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to very low strain rates and low temperatures. The influence of four different strain rates; 1 × 10−5, 1 × 10−7, ...

Pergamon-Elsevier Science Ltd2020