Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Cristian GalpertiExpertise
Control systems design and commissioning, especially involving complex scientific research architectures. Electronics engineering, embedded systems design and programming. Mechanical engineering, servo actuator systems design and commissioning.
Current Work
In charge of the direction of the control systems service of the Swiss Plasma Center
Education Ph.D. in Computer Science | 2005 – 2009 Politecnico di Milano Master degree in Electronics Engineering | 1998
Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
Stefana ParaschoTeaching & PhD PhD Students Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Courses Capitalizing on Uncertainty AR-809 SUMMER SCHOOL - Capitalizing on Uncertainty is a 6-day Summer school exploring uncertainty as a productive resource in design and fabrication through lectures, hands-on experiments, and the collaborative design and construction of a full-scale structure in a human-robot fabrication setting. Digital design and making: A criti
Damien Lambert Alain Félicien GilliardEducation Master of science | Burgerlijk ingenieur-architect 2020 – 2022 UGent Bachelor of science | Ingénieur civil architecte 2015 – 2020 UCLouvain
Teaching & PhD Courses Introduction to computational architecture AR-327 This course introduces the students to text programming practice in 3D modeling (Rhinoceros3D). The main objective of the course is to develop a computational mindset to maximize the use of efficient digital tools in architectural des
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Stefano CodaTeaching & PhD PhD Students Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino Past EPFL PhD Students Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Simone DeparisExpertise
Simone Deparis is a professor at EPFL specializing in applied mathematics, numerical analysis, and the didactics of university-level mathematics. His research spans computational modeling for biomedical applications and innovations in mathematics education, with a focus on equity, self-efficacy, and assessment reform in large STEM cohorts.
Mission
Our group conducts research at the intersection of applied mathematics and learning sciences. In applied mathematics, we focus on modeling and simulatio
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Max-Olivier HonglerExpertise
Processus stochastiquesContrôle optimal
Enseignement et PhD A dirigé les thèses EPFL de Yves Salama, Philippe Ciprut, Fabrice Dusonchet, Roger Filliger, Olivier Gallay, Julio Rodriguez, Guillaume Adrien Sartoretti
Marco PicassoExpertise
Computational Science and Engineering
Mission
I am teaching analysis and numerical analysis for engineers and mathematicians at bachelor and master levels.My research pertains to the numerical simulation of complex physical systems with partial differential equations.Here is some bibliometry: Google Scholar, Research Gate, Orcid, here is my most recent CV. Ongoing research projects: - Numerical simulation of aluminium electrolysis, collaboration with RioTinto LRF lab, Ycoorsystems SA and Jacques
Tomislav MilekovicMission
Develop and advance brain-computer interfaces - devices that allow people with paralysis to control computers, robotic hands or their own paralyzed muscles directly by their brain activity - for the purpose of helping people with paralysis regain their lost abilities.
I obtained my dipl. ing. degree in Physics (equivalent to MSc in Physiscs) from the Faculty of Science of the Zagreb University in July 2006. During my undergraduate studies, I was awarded the Best Student award of the Department of Ph
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Jonathan GravesProf. Jonathan P. Graves is a Senior Scientist at EPFL and Honorary Visiting Professor at the University of York, UK. He achieved first class joint honours in Electronic Engineering and Mathematics from the University of Nottingham, UK in 1996. He completed his Ph.D. in Theoretical Mechanics from the University of Nottingham, UK, three years later in 1999. During his Ph.D. he was based in the Culham theory group of the United Kingdom Atomic Energy Authority, developing kinetic descriptions of the internal kink instability, and participating in deuterium-tritium experimental analysis in the Joint European Torus. After a short time in industry, and a postdoc at Nottingham University, he took a position at the Swiss Plasma Center at EPFL, becoming a Senior Scientist in 2014, and became an Honorary Visiting Professor at the University of York, UK, in 2020. In 2015 he became a member of the EUROfusion Scientific and Technical Advisory Committee (STAC) and a member of the EUROfusion DEMO Technical Advisory Group. He is on the editorial board for the journal Plasma Physics and Controlled Fusion, and in 2020 became Scientific Secretary of the Varenna-Lausanne International Workshop in Theory of Fusion Plasmas.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Guillaume AnciauxResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t
Aude BillardExpertise
RoboticsMachine LearningArtificial IntelligenceHuman-Robot InteractionMechatronicsDynamical Systems ControlComputational Neuroscience
Aude Billard is full professor and head of the LASA laboratory at the School of Engineering at the Swiss Institute of Technology Lausanne (EPFL), and the Director of the Swiss Innovation Booster on Robotics. Dr. Billard acts as the President of the IEEE Robotics and Automation Society (RAS), after serving in several roles in the administrative and executive committe
