Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Plane stress

Related publications (24)

Experimental and ab initio derivation of interface stress in nanomultilayered coatings: Application to immiscible Cu/W system with variable in-plane stress

Claudia Cancellieri, Pandula Manura Liyanage

Interface stress is a fundamental descriptor for interphase boundaries and is defined in strict relation to the interface energy. In nanomultilayers with their intrinsically high interface density, the functional properties are dictated by the interface st ...

Elsevier2024

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Shearing and opening of a pre-existing discontinuity in response to fluid injection

Brice Tanguy Alphonse Lecampion, Alexis Alejandro Sáez Uribe, Ankit Gupta, Ankit Gupta

We investigate the fluid-driven growth of a shear crack along a frictional discontinuity and its transition to hydraulic fracturing (sometimes referred to as hydraulic jacking) under plane-strain conditions. We focus on the case of a constant friction coef ...

2023

Three-dimensional stress state during dynamic shear rupture propagation along frictional interfaces in elastic plates

Jean-François Molinari, Roozbeh Rezakhani

The state of stress in plates, where one geometric dimensions is much smaller than the others, is often assumed to be of plane stress. This assumption is justified by the fact that the out-of-plane stress components are zero on the free-surfaces of a plate ...

ELSEVIER2022

On the behavior of uniaxial static stress loaded micro-scale fused silica beams at room temperature

Yves Bellouard, Christos Edouardos Athanasiou, Saood Ibni Nazir

The question of whether static stress in fused silica relaxes at room temperature is still under debate. Here, we report experimental data investigating the behavior of fused silica at room temperature when subjected to static tensile stress up to 2 GPa st ...

Elsevier2022

Three-Dimensional Numerical Modelling of Al-Salam Storm Water Pumping Station in Saudi Arabia

Azin Amini, Azad Koliji

The Al-Salam Pump Station will be constructed in the framework of Jeddah Storm water Masterplan (JSWM) in Saudi Arabia. The station discharges the incoming flow from the Al-Salam storm tunnel to the Red Sea. Its structure includes a circular deep wet well ...

IAHR2022

Deformation twinning mechanism in magnesium at the microscale: strain rate, temperature and orientation effects

Nicolò Maria Della Ventura

The project aims to validate some recent theoretical developments on the deformation twinning nucleation mechanism in HCP metals through small-scale mechanic experiments. To this end, a systematic investigation of the mechanical response of pure magnesium ...

EPFL2022

Efficient equilibrium-based stress recovery for isogeometric laminated curved structures

Pablo Antolin Sanchez

This work extends the stress recovery for laminated composite solid plates, proposed in [1,2], to curved structures. Based on 3D Isogeometric Analysis (IGA) computations and equilibrium, this procedure uses a single element through the thickness in combina ...

ELSEVIER SCI LTD2021

Conceptual design of 1000 m scale steel-UHPFRC composite truss arch bridge

Jieping Zhu, Xiujiang Shen

Excessive self-weight and difficulty in construction are the main issues confronted by super-long-span arch bridges. To address these issues, a conceptual design of steel-ultra-high performance fibre-reinforced concrete (UHPFRC) composite truss arch bridge ...

ELSEVIER SCI LTD2021

Web buckling mechanism of pultruded GFRP bridge deck profiles subjected to concentrated load

Congzhe Wang

The web's local buckling is a major failure type of pultruded glass fiber-reinforced polymer (GFRP) bridge deck subjected to concentrated wheel loads. Three kinds of external actions-that is, in-plane shear force, local compressive force and bending moment ...

ELSEVIER SCIENCE INC2021

An interlocking approach for the rebar-to-concrete contact in bond

Aurelio Muttoni, Miguel Fernández Ruiz, Max Tirassa

The bond response of deformed bars in structural concrete is a phenomenon governed, to a large extent, by the rib-to-concrete contact and interaction, with contact forces depending on both material properties and the kinematics between the contact surfaces ...

ICE PUBLISHING2021

Effect of water on sandstone's fracture toughness and frictional parameters: Brittle strength constraints

Marie Estelle Solange Violay, Corentin Jean-Marie Rémi Noël

Water presence causes a dramatic reduction of sandstone strength. Under compressive stress conditions, the strength of a rock sample is controlled by frictional parameters and the fracture toughness of the material. Here, we report fracture toughness, fric ...

2021

A detailed view on the rebar–to–concrete interaction based on refined measurement techniques

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

Simplified assumptions have traditionally been made on the rebar–to–concrete interaction in structural concrete to calculate the stress state in rebars. Such assumptions typically consider a uniform stress state in the reinforcement at a given cross sectio ...

2020

Can automotive MEMS be reliably used in space applications? An assessment method under sequential bi-parameter testing

Volker Gass, Olha Sereda, Maxime Auchlin

Commercial Off-The-Shelf (COTS) automotive inertial measurement units were subjected to severe accumulative stress conditions: thermal shocks (high temperature gradients), temperature cycling (low gradients) and mechanical vibration are combined in an A-th ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Radius-dependent homogeneous strain in uncoalesced GaN nanowires

Pierre Michel Corfdir

We investigate the strain state of ensembles of thin and nearly coalescence-free self-assembled GaN nanowires prepared by plasma-assisted molecular beam epitaxy on Ti/Al2O3 (0001) substrates. The shifts of Bragg peaks in high-resolution X-ray diffraction p ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Surface textures suppress viscoelastic braking on soft substrates

John Martin Kolinski, Martin Louis Francis Coux

A gravity-driven droplet will rapidly flow down an inclined substrate, resisted only by stresses inside the liquid. If the substrate is compliant, with an elastic modulus G < 100 kPa, the droplet will markedly slow as a consequence of viscoelastic braking. ...

National Academy of Sciences2020

Sub-trabecular strain evolution in human trabecular bone

Goran Lovric, Alessandra Patera

To comprehend the most detrimental characteristics behind bone fractures, it is key to understand the material and tissue level strain limits and their relation to failure sites. The aim of this study was to investigate the three-dimensional strain distrib ...

NATURE RESEARCH2020

Propagation of fluid driven fractures in transversely isotropic material

Fatima-Ezzahra Moukhtari

The propagation of fluid driven fractures is used in a number of industrial applications (well stimulation of unconventional reservoirs, development of deep geothermal systems) but also occurs naturally (magmatic dyke intrusion). While the mechanics of hyd ...

EPFL2020

Fast and accurate elastic analysis of laminated composite plates via isogeometric collocation and an equilibrium-based stress recovery approach

Pablo Antolin Sanchez

A novel approach which combines isogeometric collocation and an equilibrium-based stress recovery technique is applied to analyze laminated composite plates. Isogeometric collocation is an appealing strong form alternative to standard Galerkin approaches, ...

2019

Two-dimensional crack growth in FRP laminates and sandwich panels

Aida Cameselle Molares

Fiber-reinforced polymer (FRP) composite materials are currently being selected for the design of lightweight and efficient structural members in a wide number of engineering applications. Sandwich panels with glass fiber-reinforced polymer (GFRP) face she ...

EPFL2019