Florian Frédéric Vincent BreiderFlorian Breider obtained his PhD in the field of the stable isotope biogeochemistry from the University of Neuchatel in 2013. This was followed by seven months of postdoc at EPFL in the Atmospheric Particles Research Laboratory and two years as research associate at Tokyo Institute of Technology (Japan) where he conducted studies on nitrous oxide biogeochemistry in oceans. From 2015 to 2018, he was research scientist in the Laboratory for Water Quality and Treatment at EPFL where he conducted research on disinfection by-products and antibiotic resistant bacteria. Since May 2018, he is director of the Central Environmental Laboratory at the Institute of Environmental Engineering of EPFL.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Hervé LissekExpertise
Acoustics and audio engineering, Electroacoustics.Room acoustics.Active noise control.Acoustic metamaterials.Assisted reverberation.Psychoacoustics.Sound spatialization
Expertise
Acoustics and audio engineering, Electroacoustics.Room acoustics.Active noise control.Acoustic metamaterials.Assisted reverberation.Psychoacoustics.Sound spatialization
Mission
Head of the Acoustic Group at the Laboratory of Wave Engineering LWE. Research topics :Active Electroacoustic Resonators: turning conventional lou
Jean-Marc OdobezExpertise
Computer Vision, machine Learning (Bayesian models, deep learning), multimodal processing.Activity analysis, human behavior understanding, human communication, interaction modeling
Dr Jean-Marc Odobez (Msc 1990, PhD 1994) received his Ph.D degree from Rennes University in 1994 for his PhD dissertation done at INRIA. After 5 years as an assistant professor at the University du Maine, France, he decided to join Idiap, where he is now the Head of the Perception & Activity Understanding Group and adju
Benoît Jean Dominique FerrariDr. Benoît J.D. Ferrari studied Biochemistry and Biology and completed his PhD in Ecotoxicology at the University of Lorraine (Metz, France) in 2000. After several years at the University of Geneva (Forel F.A. Institute, Geneva, Switzerland; 2002-2008) and Irstea (Formerly Cemagref, Lyon, France; 2000-2002 and 2008-2013), he joined the Swiss Centre of Applied Ecotoxicology (Centre Ecotox Eawag/EPFL) in October 2013 as group leader of the soil and sediment ecotoxicology group at Lausanne. During his different mandates, he was implied as (co-)proponent in different research projects supported e.g. by the Swiss Federal Office for the Environment, the Swiss National Science Foundation, the French National Research Agency or the European Framework Programme for Research. His main areas of interest cover the ecodynamic of contaminants and their impact on the ecophysiology of organisms. Particularly, he is involved in 1) the development of exposure and effect indicators to evaluate the chemical stresses, 2) the integration of such indicators in laboratory- and field-based approaches to assess the quality of aquatic ecosystems, 3) the development of adapted bioassays for active biomonitoring, and 4) the transfer of such ecotoxicological tools and approaches towards end-users.
Show more