Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Simone IadanzaTeaching & PhD Courses Nanophotonics MICRO-516 Students understand and apply the physics of the interaction of light with semiconductors. They understand the operating mechanism of scaled photonic devices such as photodetectors, LEDs and lasers, as well as challenges and opportunities relating to their integration and dimensional scaling.
Niels QuackProf. Dr. Niels Quack received the M.Sc. degree from Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, in 2005, and the Dr.Sc. degree from Eidgenössische Technische Hochschule Zürich (ETH), Zürich, Switzerland, in 2010. From 2011 to 2015, he was Postdoctoral Researcher and Visiting Scholar with the Integrated Photonics Laboratory, Berkeley Sensor and Actuator Center, University of California, Berkeley, CA, USA. From 2014 to 2015, he was Senior MEMS Engineer with Sercalo Microtechnology, Neuchâtel, Switzerland. He is currently an SNSF Assistant Professor with Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland. He has authored and co-authored more than 50 papers in leading technical journals and conferences. His research interests include photonic micro and nanosystems, with an emphasis on diamond photonics and silicon photonic MEMS. He is Steering Committee Member of the IEEE International Conference on Optical MEMS and Nanophotonics (OMN) and served as General Chair of the IEEE OMN 2018 and the Latsis Symposium 2019 on Diamond Photonics. He is a Senior Member of IEEE, Member of The Optical Society (OSA) and life member of SPIE.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Frank NüeschTeaching & PhD PhD Students Elodie Didier, Ceren Mitmit, João Pedro Ferreira Assunção, Vahid Charkhesht Past EPFL PhD Students Hui Zhang, Simon Johannes Dünki, Yee Song Ko, Lei Wang, Sandra Christina Jenatsch, Nicolas Alexandre Serge Leclaire, Donatas Gesevicius, Surendra Babu Anantharaman, Markus Regnat, Philip Horst Caspari, Patrik Schürch, David Reber, Karen Verena Strassel, Sina Abdolhosseinzadeh, Matthias Diethelm, Francis Owusu, Camilla Arietta Vael-Garn, Yeerlan Adeli, Wei-Hsu Hu, Cansu Zeytun Kara
Marta DivallDr Marta Divall is Laboratory Manager at EPFL in the group of Prof. Tobias Kippenberg at the Laboratory of Photonics and Quantum Measurements. She has obtained her masters degree in mathematics and physics from the University of Szeged. She carried out her PhD work in Rutherford Appleton Laboratory in the UK (Dr. Ian Ross) and at University of Szeged (Dr. Karoly Osvay) working on the development of high power ultrashort pulse laser systems in the UV regime. She has utilized her knowledge to develop photo-injector lasers for electron production at Daresbury Laboratory in the UK, CERN, where her main research is focused on generating unique burst mode pulse-structures for electron beam combination at 12GHz and Paul Scherrer Institute in Switzerland, where she was in charge of developing femtosecond resolution timing tools and the active stabilization for the laser systems used in SwissFEL complex.
Fabien Sorin Sep 2002-Oct 2007
Ph.D., Department of Materials Science and Engineering, MIT, USA.
Supervisor: Prof. Yoel Fink; Thesis: Multi-material, Multifunctional Fiber Devices.
After graduating with an engineering degree and a Master of Science in Physics from the Ecole Polytechnique in Palaiseau, France, Prof. Sorin joined the department of Materials Science and Engineering at the Massachusetts Institute of Technology (MIT) in Cambridge, USA for his graduate studies. He worked as a research assistant in the Photonic Bandgap Fibers and Devices Group of Professor Yoel Fink and graduated with a PhD in 2008. His PhD thesis led to the development of a new class of fiber material and devices and he was a pioneer of the field of multi-material fibers.
Mar 2008-Oct 2010
Postdoctoral Associate and Research Scientist, Research Laboratory of Electronics, MIT.
He then joined the Research Laboratory of Electronics at MIT as a Postdoctoral Associate, and continued as a Research Scientist associate, where he conducted independent research in the emerging field of multi-material fibers and was involved and led a variety of projects in fundamental research as well as in collaborations with local start-ups.
Apr 2011 Feb 2013
Research Engineer, Saint-Gobain Recherche, Aubervilliers, France.
Surface du Verre et interface Group
In 2011, prof. Sorin returned to Europe and joined the company Saint-Gobain in the Saint-Gobain Recherche center, its biggest research center located near Paris in France. As a research engineer, he developed a new research thrust investigating new photonic materials and nanostructures for the energy and building industries. In particular, he and colleagues developed innovative processing approaches to deploy photonic nanostructures for light management over large area substrates, for applications in energy harvesting and saving, and for building materials and windows.
Mar 2013 Present
Assistant Professor tenure-track, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland.
Head of the Photonic materials and fibre devices laboratory (FIMAP)
Since March 2013, he is in the department of Materials Science (IMX) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) as an assistant professor tenure-track. He is starting a research group on photonic materials and fiber devices (FIMAP), continuing on developing innovative materials processing approaches and photonic device architectures to develop new solutions in energy harvesting, saving and storage, in sensing and monitoring, health care and smart fabrics.
Philippe FlückigerSince 1999 Philippe Flückiger is the Director of Operations at the EPFL Center of MicroNanoTechnology, a world-class state-of-the-art cleanroom dedicated to research and development in the field of Micro and NanoFabrication. He received his diploma in physics from the University of Neuchâtel, Switzerland in 1987 and his PhD from the same University in 1993. His thesis work was dedicated to the deposition, patterning and characterization of high temperature superconductor epitaxial thin films. From 1993 to 1994 he was a post doc at Stanford University to develop submicron lithography with the atomic force microscope in the group of Calvin Quate, inventor of the AFM. From 1995 to 1997 he was successively process engineer, project manager and process engineering manager at Micronas SA in Bevaix, Switzerland, a microelectronics company producing baseband processors and voltage regulators for wireless applications, mostly ASICs for Nokia Mobile Phones. In 1997 he spent 4 months in the production line of EM Microelectronic Marin SA, Switzerland, a semiconductor manufacturer specialized in the design and production of ultra low power, low voltage integrated circuits for battery-operated and field-powered applications. He joined then the Swiss Federal Institute of Technology in Lausanne (EPFL) to start the new activity in diffusion, oxidation and CVD at the Center of MicroNanoTechnology. He was appointed Director of Operations of the Center in 1999.
Cyrille HibertCyrille HIBERT received his diploma in Physics in 1994 and his PhD in 1998 from University of Orleans (FR). He then held a post doctoral position in GREMI laboratory at the University of Orleans in collaboration with Alcatel Vacuum Technology and ST Microelectronics, working in deep anisotropic etching of silicon with an Inductively Coupled Plasma reactor. In May 2000 he joined the EPFL-Center of Micro-Nano-technology where he was in charge of the plasma etching activities. He left EPFL in October 2003 for a sabbatical year to join the CFF group at NMRC (Ireland) now called Tyndall Institute. He worked on developing plasma processing. In October 2004, he came back to EPFL-CMI to be in charge of etching and nanotechnology activities (FIB and future ebeam litho).
