Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Electropolishing

Related publications (29)

A colloidal aqueous electrolyte modulated by oleic acid for durable zinc metal anode

Kangning Zhao

Continuous dendrites growth, as well as corrosion and side reactions of Zn metal anode seriously hinder the development of aqueous zinc ion batteries. To address these issues, oleic acid (OA) is dispersed into a 2 M ZnSO4 solution to form a novel colloidal ...

ELSEVIER SCIENCE SA2023

Activation of stainless steel 316L anode for anion exchange membrane water electrolysis

Jan Van Herle, Suhas Nuggehalli Sampathkumar

The increased emphasis on renewable energy has resulted in a surge of R&D efforts into hydrogen and battery research. The intensive electrochemical environment surrounding the anodic oxygen evolution reaction (OER) has plagued both the activity and stabili ...

Elsevier2022

Bronze-Phase TiO2 as Anode Materials in Lithium and Sodium-Ion Batteries

Xile Hu

Titanium dioxide of bronze phase (TiO2(B)) has attracted considerable attention as a promising alternative lithium/sodium-ion battery anode due to its excellent operation safety, good reversible capacity, and environmental friendliness. However, several in ...

WILEY-V C H VERLAG GMBH2022

Modeling Current Transients in a Reciprocal Motion Tribocorrosion Experiment

Stefano Mischler, Anna Neus Igual Muñoz, Shoufan Cao

Tribocorrosion of passivating metals is a dynamic phenomenon causing degradation of materials by a combination of mechanical wear and electrochemical dissolution. The mechanical action typically produces a local removal of particles, metal as well as oxide ...

ELECTROCHEMICAL SOC INC2021

Oxygen evolution reaction: Bifunctional mechanism breaking the linear scaling relationship

Alfredo Pasquarello, Patrick Gono

The bifunctional mechanism for the oxygen evolution reaction (OER) involving two distinct reaction sites is studied through the computational hydrogen electrode method for a set of catalyst materials including rutile TiO2(110), anatase TiO2(101), SnO2(110) ...

2020

Tribocorrosion behaviour of pure titanium in bovine serum albumin solution: A multiscale study

Anna Neus Igual Muñoz

Tribocorrosion behaviour of pure titanium in phosphate buffer saline (PBS) solution has been investigated systematically as a function of surface chemistry and bovine serum albumin (BSA) content in the solution. A ball-on-disk tribometer coupled with an el ...

ELSEVIER2020

Electrochemical Stability of the Reconstructed Fe3O4(001) Surface

Klaus Kern

Establishing the atomic-scale structure of metal-oxide surfaces during electrochemical reactions is a key step to modeling this important class of electrocatalysts. Here, we demonstrate that the characteristic (root 2x root 2)R45 degrees surface reconstruc ...

Wiley-VCH Verlag GmbH2020

'Green' Cr(iii)-glycine electrolyte for the production of FeCrNi coatings: electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure

Stefano Mischler, Johann Michler, Enrico Bertero

The electrodeposition of stainless steel-like FeCrNi alloys for miniaturised devices is appealing as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, biocompatibility) at low-cost. However, conventional baths oft ...

2019

Sulfur Poisoning Recovery on a Solid Oxide Fuel Cell Anode Material through Reversible Segregation of Nickel

Jan Van Herle, Oliver Kröcher, Davide Ferri, Hossein Madi, Patrick Simon Steiger

The perovskite-type mixed oxide La0.3Sr0.55Ti0.95Ni0.05O3-delta (LSTN) is demonstrated to exhibit the remarkable property of structural regeneration, where Ni can be reversibly exsoluted from the host perovskite lattice resulting in a regenerable Ni cataly ...

AMER CHEMICAL SOC2019

Chemo-mechanical effects on the tribocorrosion behavior of titanium/ceramic dental implant pairs in artificial saliva

Anna Neus Igual Muñoz, Alejandro Roda Buch

In this paper, the degradation mechanisms of the ceramic and the metal in Titanium/Zirconia pairs for biomedical applications were analyzed. To do that, an experimental set-up with well-controlled mechanical and chemical conditions was used based on a unid ...

2019

Rapid Performance Optimization Method for Photoelectrodes

Sophia Haussener, Yannick Kenneth Gaudy

We report the development of a rapid method for the performance optimization of photoelectrodes. The method requires as an input incident photon-to-current efficiency (IPCE) measurements of a material at two or more wavelengths, an estimation of the comple ...

2019

Influence of anodization time on the surface modifications on alpha-Fe2O3 photoanode upon anodization

Yelin Hu

In searching for a suitable semiconductor material for hydrogen production via photoelectrochemical water splitting, alpha-Fe2O3 received significant attention as a promising photoanode due to its band gap (similar to 2.1 eV), good stability, low cost, and ...

Materials Research Society2016

An Indium-Free Anode for Large-Area Flexible OLEDs: Defect-Free Transparent Conductive Zinc Tin Oxide

Christophe Ballif, Aïcha Hessler-Wyser, Quentin Thomas Jeangros, Monica Morales Masis, Ali Dabirian, Fabien Paul Jacques Dauzou

Flexible large-area organic light-emitting diodes (OLEDs) require highly conductive and transparent anodes for efficient and uniform light emission. Tin-doped indium oxide (ITO) is the standard anode in industry. However, due to the scarcity of indium, alt ...

Wiley-Blackwell2016

Approximation numérique des écoulements turbulents dans des cuves d'électrolyse de l'aluminium

Jonathan Rochat

Aluminium is a metal extracted from bauxite ore using electrolysis process in cells of big size. A huge electric current goes in the cell through an electrolytic bath and aluminium liquid. These currents generate strong magnetic forces that allow the bath ...

EPFL2016

Fabrication and characterization of monolithically integrated microchannel plates based on amorphous silicon

Christophe Ballif, Nicolas Würsch, Jonas Geissbühler, Andrea Franco

Microchannel plates are vacuum-based electron multipliers for particle—in particular, photon— detection, with applications ranging from image intensifiers to single-photon detectors. Their key strengths are large signal amplification, large active area, mi ...

Nature Publishing Group2014

Electrochemical Pseudo-Titration of Water-Soluble Antioxidants

Hubert Girault, Andreas Stephan Lesch, Fernando Cortes Salazar

An amperometric test for the antioxidant power (AOP) of biological and food samples is presented. The gist of the method is to measure by linear sweep voltammetry the anodic current produced during the oxidation of the labile species present in the sample ...

Wiley-Blackwell2013

Synthesis, characterization and X-ray crystal structures of two polymorphs of a cobalt(III) complex with a N3O2 pentadentate Schiff base ligand, and benzylamine: spectral and electrochemical studies

Kurt Schenk, Farzaneh Fadaei Tirani

The title complex [Co-III{(naph)(2)dpt}(bzlan)]BPh4, where (naph)(2)dpt stands for bis-(2-hydroxy-1-naphthaldimine)-N-dipropylenetriamine dianion and bzlan for benzylamine, has been synthesized and characterized by elemental analyses, IR, UV-Vis and H-1 NM ...

Springer2013

Material Study of Micromachined Thin Film Solid Oxide Fuel Cells

Yan Yan

Miniaturized, low temperature Solid Oxide Fuel Cells (SOFCs) that operate below 600 °C are promising for supplying electrical power to portable devices. Thin electrolyte membranes of less than one micrometer thickness have been shown to yield reasonable po ...

EPFL2012

The Transient Photocurrent and Photovoltage Behavior of a Hematite Photoanode under Working Conditions and the Influence of Surface Treatments

Michael Graetzel, Kevin Sivula, Florian Le Formal

Hematite (alpha-Fe2O3) is widely recognized as a promising candidate for the production of solar fuels via water splitting, but its intrinsic optoelectronic properties have limited its performance to date. In particular, the large electrochemical overpoten ...

American Chemical Society2012

Impact of Random Geometric Distortions on the Performance and Reliability of an SOFC

Zacharie Wuillemin, Thierry Mikaël Cornu

A method based on Monte Carlo simulations (MCS) is developed to assess the impact of manufacturing tolerances on the performance and reliability of solid oxide fuel cells (SOFCs). Computational fluid dynamics (CFD) simulations of the anode gas diffusion la ...

Wiley-Blackwell2011